;****************************************************************************************
;
; NETR28.INF
;
; This installation script supports Windows Vista for the
; Ralink RT2860 series Wireless LAN Card.
;
; Copyright (c)2007, Ralink Technology Corp., All Rights Reserved
; Developed by RaLink Technology, Corp. -- http://www.ralinktech.com
;
;****************************************************************************************
[Version]
Signature = "$Chicago$"
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %BUFFALO%
Compatible = 1
CatalogFile = cbg300n2.cat
DriverVer = 11/03/2008,2.01.02.0000
[ControlFlags]
;ExcludeFromSelect = PCI\VEN_1814&DEV_0601
[Manufacturer]
%BUFFALO% = BUFFALO
[BUFFALO]
; DisplayName Section DeviceID
; ----------- ------- --------
%WLI2CBG300N.DeviceDesc% = BUFFALO.ndi, PCI\VEN_1814&DEV_0601&SUBSYS_03591154
%WLICBG300HP.DeviceDesc% = BUFFALO.ndi, PCI\VEN_1814&DEV_0601&SUBSYS_03641154
;*******************************************************************************************
; NT specific entries
;*******************************************************************************************
[BUFFALO.ndi.NT]
AddReg = RT2860.reg
Characteristics = 0x84 ; NCF_REMOVABLE | NCF_HAS_UI | NCF_PHYSICAL
BusType = 5
CopyFiles = NT.CopyFiles
*IfType = 71 ; IF_TYPE_IEEE80211
*MediaType = 16 ; NdisMediumNative802_11
*PhysicalMediaType = 9 ; NdisPhysicalMediumNative802_11
;*******************************************************************************************
; NT services sections
;*******************************************************************************************
[BUFFALO.ndi.NT.Services]
AddService = cbg300n2, 2, Generic.Service, common.EventLog
;*******************************************************************************************
; RT2860 registry for Windows Vista
;*******************************************************************************************
[RT2860.reg]
HKR, Ndi, Service, 0, "cbg300n2"
HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
HKR, Ndi\Interfaces, LowerRange, 0, "wlan,ethernet"
;
; WirelessMode
;
HKR, , WirelessMode, 0, "5"
;
; Channel
;
HKR, , Channel, 0, %CHANNEL%
HKR, Default, Channel, 0, %CHANNEL%
;
; Radio On/Off
;
HKR, , Radio, 0, "0"
HKR, NDI\params\Radio, ParamDesc, 0, %RadioOnOff%
HKR, NDI\params\Radio, type, 0, "enum"
HKR, NDI\params\Radio, default, 0, "0"
HKR, NDI\params\Radio\enum, 1, 0, %Disable%
HKR, NDI\params\Radio\enum, 0, 0, %Enable%
;
; WMMCapable
;
HKR, , WMMCapable, 0, "1"
;
; FrameAggregation
;
HKR, , FrameAggregation,0, "0"
;
; IEEE80211H
;
HKR, , IEEE80211H, 0, "0"
HKR, NDI\params\IEEE80211H, ParamDesc, 0, %IEEE802_11h%
HKR, NDI\params\IEEE80211H, type, 0, "enum"
HKR, NDI\params\IEEE80211H, default, 0, "0"
HKR, NDI\params\IEEE80211H\enum, 0, 0, %Disable%
HKR, NDI\params\IEEE80211H\enum, 1, 0, %Enable%
;
; CarrierDetect
;
HKR, , CarrierDetect, 0, "0"
;
; WPS Device Name
;
HKR, , WPSDevName, 0, %WPS_DEVNAME_DEF_STR%
HKR, Default, WPSDevName, 0, %WPS_DEVNAME_DEF_STR%
;
; OpMode
;
HKR, , OpMode, 0, "0"
;
; Enable TX Burst
;
HKR, , TXBurst, 0, "0"
;
; Use Short Slot Time
;
HKR, , ShortSlot, 0, "1"
; Block ACK settings
;
HKR, , BACapability, 0x10001, "0x0b034040"
HKR, Default, BACapability, 0x10001, "0x0b034040"
;
; Transmit Rate setting
;
HKR, , TransmitSetting, 0x10001, "0x2B215"
HKR, Default, TransmitSetting, 0x10001, "0x2B215"
;
; RDG
;
HKR, , RDG, 0, "0"
;
; Network Type
;
HKR, , NetworkType, 0, "1"
HKR, Default, NetworkType, 0, "1"
;
; AdhocNMode
;
HKR, , AdhocNMode, 0, "0"
HKR, NDI\params\AdhocNMode, ParamDesc, 0, %AdhocNMode%
HKR, NDI\params\AdhocNMode, type, 0, "enum"
HKR, NDI\params\AdhocNMode, default, 0, "0"
HKR, NDI\params\AdhocNMode\enum, 0, 0, %Disable%
HKR, NDI\params\AdhocNMode\enum, 1, 0, %Enable%
;
; SmartScan
;
HKR, , SmartScan, 0, "1"
HKR, NDI\params\SmartScan, ParamDesc, 0, %SmartScan%
HKR, NDI\params\SmartScan, type, 0, "enum"
HKR, NDI\params\SmartScan, default, 0, "1"
HKR, NDI\params\SmartScan\enum, 0, 0, %Disable%
HKR, NDI\params\SmartScan\enum, 1, 0, %Enable%
;
; Power Saving Mode
;
HKR, , PSMode, 0, "0"
HKR, Default, PSMode, 0, "0"
HKR, NDI\params\PSMode, ParamDesc, 0, %PSMode%
HKR, NDI\params\PSMode, type, 0, "enum"
HKR, NDI\params\PSMode, default, 0, "0"
HKR, NDI\params\PSMode\enum, 0, 0, %CAM%
HKR, NDI\params\PSMode\enum, 1, 0, %MAXPSP%
;
; Power Save control
;
HKR, , PSControl, 0x00010001, 0x00000000
;*******************************************************************************************
; DestinationDirs
;*******************************************************************************************
[NT.CopyFiles]
cbg300n2.sys,,,2
[SourceDisksNames]
1 = %INSTALL_DISK_STR%,,,
[SourceDisksFiles]
cbg300n2.sys = 1,,
[DestinationDirs]
NT.CopyFiles = 12 ; system32\drivers subdirectory on NT
DefaultDestDir = 11
;*******************************************************************************************
; NT specific
;*******************************************************************************************
[Generic.Service]
DisplayName = %WLI2CBG300N.Service.DispName%
ServiceType = 1 ;%SERVICE_KERNEL_DRIVER%
StartType = 3 ;%SERVICE_AUTO_START%
ErrorControl = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\cbg300n2.sys
LoadOrderGroup = NDIS
[common.EventLog]
AddReg = common.AddEventLog.reg
[common.AddEventLog.reg]
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported, 0x00010001, 7
;*******************************************************************************************
; Strings
;*******************************************************************************************
[Strings]
BUFFALO = "BUFFALO INC."
RadioOnOff = "Radio On/Off"
Disable = "Disable"
Enable = "Enable"
IEEE802_11h = "IEEE802.11h"
SmartScan = "Multimedia/Gaming Environment"
PSMode = "Power Saving Mode"
CAM = "CAM"
MAXPSP = "Max_PSP"
AdhocNMode = "Adhoc support 802.11n"
;*******************************************************************************************
; Device description
;*******************************************************************************************
WLI2CBG300N.DeviceDesc = "BUFFALO WLI2-CB-G300N Wireless LAN Adapter"
WLICBG300HP.DeviceDesc = "BUFFALO WLI-CB-G300HP Wireless LAN Adapter"
INSTALL_DISK_STR = "AirNavigator CD"
WLI2CBG300N.Service.DispName = "BUFFALO WLI2-CB-G300N Wireless LAN Driver"
;
; Parameters
;
CHANNEL = "1"
WPS_DEVNAME_DEF_STR = "Ralink Client"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.