;***********************************************************************
;
; OEMSETUP.INF
;
; MELCO WLI-PCM 802.11 Network Adapter .INF file
;
;***********************************************************************
;-----------------------------------------------------------------------
; OPTION TYPE
; -----------
; This identifies the Option type we are dealing with. The different
; possible types are:
;
; COMPUTER, DISPLAY, MOUSE, KEYBOARD, LAYOUT, SCSI, PRINTER, ...
;
; Types specific to networking:
;
; NetAdapter, a netcard / adapter combination or just a netcard
; NetDriver, just a netcard driver
; NetTransport, a complete NDIS-compliant TDI transport stack
; NetService, an NT networking service
; NetWork, a complete network ensemble.
; NetProvider a complete network which supports NT MPR protocol
;-----------------------------------------------------------------------
[Identification]
OptionType = NetAdapter
;-----------------------------------------------------------------------
; PlatformsSupported
; ------------------
; This identifies the platforms supported by the adapter card.
; Possible types are:
;
; ISA, EISA, MCA and PCMCIA
;-----------------------------------------------------------------------
[PlatformsSupported]
ISA
; EISA
PCI
PCMCIA
;-----------------------------------------------------------------------
; OPTION LIST
; -----------
; This section lists the OEM Option key names. These keys are locale
; independent and used to represent the option in a locale independent
; manner.
;
;-----------------------------------------------------------------------
[Options]
WLIPCM
;***********************************************************************
; CONSTANTS FOR USING DIALOGS
;***********************************************************************
[FileConstants]
GenericAdapterName = "MELCO WLI-PCM 802.11 Network Adapter"
GenericDriverName = "MELCO WLI-PCM 802.11 NDIS3 miniport driver"
GenericSysName = "wlipcm.sys"
GenericName = "Wlipcm"
;
; File names, etc.
;
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
;
; EventLog Message File
;
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
;
; Product Info
;
Manufacturer = "MELCO"
ProductMajorVersion = "2"
ProductMinorVersion = "1"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
;
; Software
;
ProductSoftwareName = "Wlipcm"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "wlipcmSys ndisDriver wlipcmDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """wlipcmSys"" yes no container"
NetRuleSoftwareClass = {"wlipcmDriver basic"}
NetRuleSoftwareBindable = {"wlipcmDriver wlipcmAdapter non exclusive 100"}
;
; Hardware
;
ProductHardwareName = "Wlipcm"
NetRuleHardwareType = "wlipcm wlipcmAdapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"wlipcmAdapter basic"}
;
; Registry Key
;
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
PcmciaDataBaseKeyName = $(!NTN_ServiceBase)"\Pcmcia\Database"
[GeneralConstants]
;
; Program flow control variables.
;
from = ""
to = ""
;
; Return codes; Exit_Code is set to one of these
;
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
; Now is a list which contains { Sec from 1-1-1970, Year, Month, Day, Hour,
; Minute, Second }
Now = {} ? $(!LIBHANDLE) GetSystemDate
;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
;
; INPUT: None
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;---------------------------------------------------------------------------
[Identify]
;
;
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
; STATUS_NOTSUPPORTED
;
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
;
;
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
;
; Check if the platforms requested is supported
;
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
;
; form a list of all the options and another of the text representing
;
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;------------------------------------------------------------------------
;
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;
;------------------------------------------------------------------------
[InstallOption]
;
; Set default values for
;
set Status = STATUS_FAILED
;
; extract parameters
;
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
Set !DebugOutputControl = 0
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
;
; Assume all is well.
;
set CommonStatus = STATUS_SUCCESSFUL
EndWait
;
; Set up the operation-mode-based variables and gaily welcome
; the user. If the "install mode" variable is improperly set,
; assume this is a new installation.
;
Begin = +
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
; set ActivateDetection = TRUE
set StartLabel = configureadapter
;
; You cannot config the software component
;
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Debug-Output "Cannot configure the PCNet-Mobile driver software."
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
endif
else
; set ActivateDetection = TRUE
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
; set the default values
; I/O Base Address = 0x200
set IOBaseAddrValue = *($(IOBaseAddrList), 1)
; IRQ Level = 10
set IRQValue = *($(IRQList), 6)
; PCMCIA Attribute Memory Base Address = D1000
set MemBaseAddrValue = *($(MemBaseAddrList), 10)
set NetworkModeValue = 0
set Chk1 = "OFF"
set FHPatternValue = *($(FHPatternList), 1)
set DSChannelValue = *($(DSChannelList), 14)
set PowerManValue = *($(PowerManList), 1)
set PktSizeValue = *($(PktSizeList), 12)
set ESSIDValue = "AIRCONNECT"
set IoAccessValue = 0
set Chk2 = "OFF"
set WlipciValue = 1
set Chk3 = "ON"
set EncapsulatedValue = 0
set Chk4 = "OFF"
set PcmciaValue = 1
set Chk5 = "ON"
Set from = $(fatal)
Set to = $(fatal)
Goto $(StartLabel)
;-----------------------------------------------
; Installation Section
;-----------------------------------------------
installadapter = +
;
; Create/recreate the Registry's PCMCIA database entry for the PCnet-Mobile.
;
set KeyPcmciaDataBase = ""
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaDataBaseKeyName) $(MAXIMUM_ALLOWED) KeyPcmciaDataBase
Shell "" ExCreateRegKey $(KeyPcmciaDataBase) "AMD\Am79C930"
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaDataBaseKeyName)"\AMD\Am79C930" $(MAXIMUM_ALLOWED) KeyTemp
SetRegValue $(KeyTemp) {Driver,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)}
SetRegValue $(KeyTemp) {DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}
CloseRegKey $(KeyTemp)
CloseRegKey $(KeyPcmciaDataBase)
;
; Check whether the same version of the software exists
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
;
; Same version already existed in the local machine
; Popup the dialog and ask the user whether he wants to continue
;
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
;
; Cannot Install the same software again
;
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
;
; Add a new adapter card?
;
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExisted = $(TRUE)
endif
endif
;
; dll load addition
;
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
install "Install-Dll"
goto adaptersetup
;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
;
; Get the current values of all the parameters
;
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
;
; Get the other parameters; they're attached to the service parameters key
;
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
;
; We don't need the services key, so close it.
;
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
;
; Get the old values
;
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "NetworkMode"
set NetworkModeValue = $(ValueData)
else-ifstr(i) $(ValueName) == "Interrupt_Mode"
set WlipciValue = $(ValueData)
else-ifstr(i) $(ValueName) == "Pcmcia"
set PcmciaValue = $(ValueData)
else-ifstr(i) $(ValueName) == "Encapsulated"
set EncapsulatedValue = $(ValueData)
else-ifstr(i) $(ValueName) == "IoAccessMode"
set IoAccessValue = $(ValueData)
else-ifstr(i) $(ValueName) == "Power_Management"
set PowerManIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "PktSize"
set PktSizeValue = $(ValueData)
else-ifstr(i) $(ValueName) == "Desired_ESS_ID"
set ESSIDValue = $(ValueData)
else-ifstr(i) $(ValueName) == "DS_Channel"
set DSChannelValue = $(ValueData)
else-ifstr(i) $(ValueName) == "FH_Index"
set FHIndValue = $(ValueData)
else-ifstr(i) $(ValueName) == "FH_Pattern"
set FHPatternValue = $(ValueData)
;else-ifstr(i) $(ValueName) == "PCCARDAttributeMemoryAddress"
else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress"
set MemBaseAddrIndex = $(ValueData)
endif
EndForListDo
ifint $(NetworkModeValue) == 1
set Chk1 = "ON"
else
set Chk1 = "OFF"
endif
ifint $(IoAccessValue) == 1
set Chk2 = "ON"
else
set Chk2 = "OFF"
endif
ifint $(WlipciValue) == 1
set Chk3 = "ON"
else
set Chk3 = "OFF"
endif
ifint $(EncapsulatedValue) == 1
set Chk4 = "OFF"
else
set Chk4 = "ON"
endif
ifint $(PcmciaValue) == 1
set Chk5 = "ON"
else
set Chk5 = "OFF"
endif
set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex)))
ifstr(i) $(IOBaseAddrValue) == ""
set IOBaseAddrValue = *($(IOBaseAddrList), 1)
endif
set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex)))
ifstr(i) $(IRQValue) == ""
set IRQValue = *($(IRQList), 1)
endif
set MemBaseAddrValue = *($(MemBaseAddrList), ~($(MemBaseAddrValues),$(MemBaseAddrIndex)))
ifstr(i) $(MemBaseAddrValue) == ""
set MemBaseAddrValue = *($(MemBaseAddrList), 1)
endif
set PktSizeValue = *($(PktSizeList), ~($(PktSizeValues),$(PktSizeValue)))
ifstr(i) $(PktSizeValue) == ""
set PktSizeValue = *($(PktSizeList), 7)
endif
set FHIndValue = *($(FHIndList), ~($(FHIndValues),$(FHIndValue)))
ifstr(i) $(FHIndValue) == ""
set FHIndValue = *($(FHIndList), 1)
endif
set FHPatternValue = *($(FHPatternList), ~($(FHPatternValues),$(FHPatternValue)))
ifstr(i) $(FHPatternValue) == ""
set FHPatternValue = *($(FHPatternList), 1)
endif
set DSChannelValue = *($(DSChannelList), ~($(DSChannelValues),$(DSChannelValue)))
ifstr(i) $(DSChannelValue) == ""
set DSChannelValue = *($(DSChannelList), 1)
endif
set PowerManValue = *($(PowerManList), ~($(PowerManValues),$(PowerManIndex)))
ifstr(i) $(PowerManValue) == ""
set PowerManValue = *($(PowerManList), 1)
endif
; Save the settings as they were read from the Registry.
; Shell $(ParamInf) Param_SaveValues
; Set CurrParamSettings = $($R0)
;
; Put up the adapter configuration dialog if necessary.
;
; Note that $(CurrParamSettings) has the old known parameter values.
;
adaptersetup = +
; Shell "" DebugConfiguration "before displaying dialog"
Set from = adapteroptions
adapteroptions = +
LoadLibrary "AirNavigator CD" $(DialogDllName) hLib
set OldIOBaseAddrValue = $(IOBaseAddrIndex)
set OldIRQValue = $(IRQValueIndex)
set OldMemBaseAddrValue = $(MemBaseAddrIndex)
configure_adapter = +
read-syms FileDependentDlg$(!STF_LANGUAGE)
ui start "InputDlg" $(hLib)
set ExitButton = $(ButtonPressed)
Debug-Output " ButtonPressed "$(ButtonPressed)
FreeLibrary $(hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
set IOBaseAddrIndex = $(Combo1Out)
set IRQValueIndex = $(Combo2Out)
set MemBaseAddrIndex = $(Combo3Out)
;kpdebug switch pktsize and fhind
set PktSizeValue = $(Combo4Out)
; set FHIndValue = $(Combo5Out)
; set PowerManIndex = $(Combo7Out)
set ESSIDValue = *($(EditTextOut),1)
; set DSChannelValue = $(Combo8Out)
; set FHPatternValue = $(Combo6Out)
Set Chk = *($(CheckItemsOut), 1)
Ifstr(i) $(Chk) == "ON"
Set NetworkModeValue = 1
set Chk1 = "ON"
Else
Set NetworkModeValue = 0
set Chk1 = "OFF"
Endif
Set Chk = *($(CheckItemsOut), 2)
Ifstr(i) $(Chk) == "ON"
Set IoAccessValue = 1
set Chk2 = "ON"
Else
Set IoAccessValue = 0
set Chk2 = "OFF"
Endif
Set Chk = *($(CheckItemsOut), 3)
Ifstr(i) $(Chk) == "ON"
Set WlipciValue = 1
set Chk3 = "ON"
Else
Set WlipciValue = 0
set Chk3 = "OFF"
Endif
Set Chk = *($(CheckItemsOut), 4)
Ifstr(i) $(Chk) == "ON"
Set EncapsulatedValue = 0
set Chk4 = "ON"
Else
Set EncapsulatedValue = 1
set Chk4 = "OFF"
Endif
; Set Chk = *($(CheckItemsOut), 5)
; Ifstr(i) $(Chk) == "ON"
; Set PcmciaValue = 1
; set Chk5 = "ON"
; Else
; Set PcmciaValue = 0
; set Chk5 = "OFF"
; Endif
LoadLibrary "AirNavigator CD" $(DialogDllName) hLib
set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrIndex)))
set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
set MemBaseAddrValue = *($(MemBaseAddrValues), ~($(MemBaseAddrList),$(MemBaseAddrIndex)))
LibraryProcedure Result $(hLib) CheckIrqUsage $(IRQValue)
Ifstr(i) $(!NTN_InstallMode) == install
ifstr(i) $(Result) == "FALSE"
read-syms IrqConflictMsgDlg ; set up the message box variables
ui start "IrqConflictMsgBox"
goto configure_adapter
endif
else
ifstr(i) $(IRQValue) != $(OldIRQValue)
ifstr(i) $(Result) == "FALSE"
read-syms IrqConflictMsgDlg ; set up the message box variables
ui start "IrqConflictMsgBox"
goto configure_adapter
endif
endif
endif
LibraryProcedure Result $(hLib) CheckIoUsage $(IOBaseAddrValue)
Ifstr(i) $(!NTN_InstallMode) == install
ifstr(i) $(Result) == "FALSE"
read-syms IoConflictMsgDlg ; set up the message box variables
ui start "IoConflictMsgBox"
goto configure_adapter
endif
else
ifstr(i) $(IOBaseAddrValue) != $(OldIOBaseAddrValue)
ifstr(i) $(Result) == "FALSE"
read-syms IoConflictMsgDlg ; set up the message box variables
ui start "IoConflictMsgBox"
goto configure_adapter
endif
endif
endif
Ifstr(i) $(!NTN_InstallMode) == install
LibraryProcedure Result $(hLib) CheckMemUsage $(MemBaseAddrValue)
else
LibraryProcedure Result $(hLib) CheckMemUsageRange $(MemBaseAddrValue) $(OldMemBaseAddrValue)
endif
ifstr(i) $(Result) == "FALSE"
read-syms MemConflictMsgDlg ; set up the message box variables
ui start "MemConflictMsgBox"
goto configure_adapter
endif
; LibraryProcedure Result $(hLib) CheckMemUsage $(MemBaseAddrValue)
; Ifstr(i) $(!NTN_InstallMode) == install
; ifstr(i) $(Result) == "FALSE"
; read-syms MemConflictMsgDlg ; set up the message box variables
; ui start "MemConflictMsgBox"
; goto configure_adapter
; endif
; else
; ifstr(i) $(MemBaseAddrValue) != $(OldMemBaseAddrValue)
; ifstr(i) $(Result) == "FALSE"
; read-syms MemConflictMsgDlg ; set up the message box variables
; ui start "MemConflictMsgBox"
; goto configure_adapter
; endif
; endif
; endif
FreeLibrary $(hLib)
set ExitButton = $(ButtonPressed)
ui pop 1
; goto nextstep
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
Debug-Output "Action: exit. Bye."
ui pop 1
goto end
else
;
; Unknow command
;
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
Debug-Output " Combo list out "$(ComboListItemsOut)
;
; If installing, go create the necessary keys;
; if configuring, they're already open.
;
skipoptions =+
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
;
; Add Software Component
;
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
;
; At this point:
; $R1 contains the product version key handle;
; $R2 contains the NetRules subkey handle;
; $R3 contains the new Services key handle; and
; $R4 contains the Parameters key
; $R5 contains the Linkage Key
;
set RegistryErrorIndex = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
;
; Create the HARDWARE\Netcard region and its corresponding service
;
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
;
; At this point:
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
;
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
Set WlipcmServiceName = $($R5)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
;
; REQUIRED: $(KeyParameters) contains service Parameters key handle
;
writeparameters = +
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
;
; Add the rest of the parameters to the Services area
;
set IOBaseAddrValue = *($(IOBaseAddrValues), ~($(IOBaseAddrList),$(IOBaseAddrIndex)))
set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
set MemBaseAddrValue = *($(MemBaseAddrValues), ~($(MemBaseAddrList),$(MemBaseAddrIndex)))
set PktSizeValue = *($(PktSizeValues), ~($(PktSizeList),$(PktSizeValue)))
set FHIndValue = *($(FHIndValues), ~($(FHIndList),$(FHIndValue)))
set FHPatternValue = *($(FHPatternValues), ~($(FHPatternList),$(FHPatternValue)))
set PowerManValue = *($(PowerManValues), ~($(PowerManList),$(PowerManIndex)))
set DSChannelValue = *($(DSChannelValues), ~($(DSChannelList),$(DSChannelValue)))
set NewValueList = {+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{IoLength,$(NoTitle),$(!REG_VT_DWORD),16},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{MemoryMappedBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemBaseAddrValue)},+
{MemoryMappedSize,$(NoTitle),$(!REG_VT_DWORD),24576},+
{Interrupt_Mode,$(NoTitle),$(!REG_VT_DWORD),$(WlipciValue)},+
{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),$(PcmciaValue)},+
{Encapsulated,$(NoTitle),$(!REG_VT_DWORD),$(EncapsulatedValue)},+
{Power_Management,$(NoTitle),$(!REG_VT_DWORD),$(PowerManValue)},+
{PktSize,$(NoTitle),$(!REG_VT_DWORD),$(PktSizeValue)},+
{DS_Channel,$(NoTitle),$(!REG_VT_DWORD),$(DSChannelValue)},+
{FH_Index,$(NoTitle),$(!REG_VT_DWORD),$(FHIndValue)},+
{FH_Pattern,$(NoTitle),$(!REG_VT_DWORD),$(FHPatternValue)},+
{Desired_ESS_ID,$(NoTitle),$(!REG_VT_SZ),$(ESSIDValue)},+
{IoAccessMode,$(NoTitle),$(!REG_VT_DWORD),$(IoAccessValue)},+
{WinNT,$(NoTitle),$(!REG_VT_DWORD),1},+
{NetworkMode,$(NoTitle),$(!REG_VT_DWORD),$(NetworkModeValue)}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
CloseRegKey $(KeyParameters)
ifint $(WlipciValue) == 1
LoadLibrary "AirNavigator CD" $(DialogDllName) hLib
LibraryProcedure Result $(hLib) SetWlipciIrq $(IRQValue) $(WlipciValue) $(WlipcmServiceName)
Endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
goto successful
;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------
UpgradeSoftware = +
;
; First determine whether we want to do upgrade or update for software
; or hardware component. Then we will determine whether the Mode is
; update or upgrade.
;
; If the same version of the product existed in the registry, we do
; update. Otherwise, we will do a upgrade
;
; ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Upgrade software component
;
; see whether the same version exist or not
;
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
;
; Update the binaries
;
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
; Upgrade the version number
;
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
;
; do nothing for update
;
ifint $(Version) != $(ProductVersion)
;
; If the major version number is not the same,
; it is major upgrade. So let Upgrade the product
;
;
; make other upgrade change if necessary
;
endif
CloseRegKey $(KeyProduct)
else
;
; Cannot Open software key, goto ERROR
;
goto fatalregistry
endif
; else
;
; upgrade/update hardware component
; There is no different between upgrade and update for hardware
; component
;
; 1. Get the Service Name
; 2. Change the NetRule section if necessary
;
; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
; $(MAXIMUM_ALLOWED) NetworkCardKey
; Ifstr(i) $(NetworkCardKey) != $(KeyNull)
;
; Get Service name
;
; GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
; set ServiceName = *($(ServiceNameInfo), 4)
;
; Change the NetRule if necessary
;
; OpenRegKey $(NetworkCardKey) "" "NetRules" +
; $(MAXIMUM_ALLOWED) NetRuleKey
; Ifstr(i) $(NetRuleKey) != $(KeyNull)
;
; Make the change....
;
; else
;
; Error, cannot open net rules key
;
; goto fatalregistry
; endif
; CloseRegKey $(NetRules)
; CloseRegKey $(NetworkCardKey)
; else
;
; Error, cannot open network card key
;
; goto fatalregistry
; endif
;
; 3. Change the service section of the hardware. i.e.,
; ParameterName change, value change, etc.
;
; OpenRegKey $(!REG_H_LOCAL) "" +
; $(!NTN_ServiceBase)"\"$(ServiceName) +
; $(MAXIMUM_ALLOWED) ServiceKey
; Ifstr(i) $(ServiceKey) != $(KeyNull)
;
; Get the ServiceKey to change the Start value
; or Type value. Or open Parameters key to
; change the hardware parameters if necessary.
;
; CloseRegKey $(ServiceKey)
; else
;
; Error, cannot open network card key
;
; goto fatalregistry
; endif
; endif
goto end
;
; End of Upgrade Software
;
;
; Escape hatches
;
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;
; warning display
;
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
;
; non fatal error display
;
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
;
; Registry is broken
;
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
;
; Netcard detection failure
;
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
;
; fatal error display
;
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
;
; Shelling error
;
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
;
; if OEM_ABANDON_ON == TRUE, then remove the registry entries
;
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[DebugConfiguration]
Set InfName = "OEMNADE2.INF"
Debug-Output $(InfName)" **CONFIGURATION STATE: "$($0)
Debug-Output $(InfName)" IRQ_Level is "$(!p:IRQ_Level)
Debug-Output $(InfName)" IOBaseAddrValue is "$(!p:IOBaseAddrValue)
Debug-Output $(InfName)" TransceiverValue is "$(!p:TransceiverValue)
Debug-Output $(InfName)" MemBaseAddrDec is "$(!p:MemBaseAddrDec)
Debug-Output $(InfName)" MappedValue is "$(!p:MappedValue)
Debug-Output $(InfName)" PowerManValue is "$(!p:PowerManValue)
Debug-Output $(InfName)" DSChannelValue is "$(!p:DSChannelValue)
Debug-Output $(InfName)" FHIndValue is "$(!p:FHIndValue)
Debug-Output $(InfName)" FHPatternValue is "$(!p:FHPatternValue)
return
;***************************************************************
; INSTALL SECTIONS
;***************************************************************
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
;
; Add the files to the copy list
;
; BUGBUG: eliminate the "nt2" in the next line when Sunil fixes
; the other INF files
;
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
endif
ifstr(i) $(DoCopy) == "YES"
;
; Copy files in the copy list
;
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;set STF_VERSION = "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Dll]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "MELCO WLI-PCM 802.11 Network Adapter"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, oemsetup.inf, SIZE=40558, RENAME=$(!UG_Filename)
[Files-WLIPCM]
1, wlipcm.sys, SIZE=12800
[Files-Dll]
1, wlipcm.dll , SIZE=5632
[LanguagesSupported]
ENG
[OptionsTextENG]
WLIPCM = "MELCO WLI-PCM 802.11 Network Adapter"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = $(GenericAdapterName)" Setup"
ProductSoftwareDescription = $(GenericDriverName)
ProductHardwareDescription = $(GenericAdapterName)
ProductSoftwareTitle = $(GenericDriverName)
ProductHardwareTitle = $(GenericAdapterName)
DialogDllName = "wlipcm.dll"
IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)
IRQList = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
MemBaseAddrList = ^(MemBaseAddrChoices, 1)
MemBaseAddrValues = ^(MemBaseAddrChoices, 2)
PktSizeList = ^(PktSizeChoices,1)
PktSizeValues = ^(PktSizeChoices,2)
FHIndList = ^(FHIndChoices,1)
FHIndValues = ^(FHIndChoices,2)
FHPatternList = ^(FHIndChoices,1)
FHPatternValues = ^(FHIndChoices,2)
DSChannelList = ^(DSChannelChoices,1)
DSChannelValues = ^(DSChannelChoices,2)
PowerManList = ^(PowerManChoices,1)
PowerManValues = ^(PowerManChoices,2)
[DialogConstantsENG]
; Help = "&Help"
; Exit = "Cancel"
; OK = "OK"
; HelpContext = ""
; Continue = "Continue"
; Cancel = "Cancel"
Help = "ヘルプ(&H)"
Exit = "キャンセル"
OK = "OK"
HelpContext = ""
Continue = "OK"
Cancel = "キャンセル"
[MemoryMappedChoicesENG]
Map_1 = 1, "ON"
Map_2 = 0, "OFF"
[FileDependentDlgENG]
DlgText = "Please select values for the follwing fields:"
DlgType = "RadioCombination"
DlgTemplate = "PCNTN3"
Caption = $(FunctionTitle)
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
HelpContext = $(!IDH_DB_OEMNADE2_INS)
Combo1Label = "I/&Oポート:"
Combo2Label = "I&RQレベル:"
Combo3Label = "メモリアドレス(&M):"
Combo4Label = "パケットサイズ(&S):"
Edit1Label = "&ESS ID:"
BigButton = "More pcntn3 BS >>"
CheckBox1 = "アクセスポイント経由Ê信(&I)"
CheckBox2 = "&PIO Mode"
CheckBox3 = "&WLI-PCI"
CheckBox4 = "R&FC 1042"
Combo1List = $(IOBaseAddrList)
Combo1Out = $(IOBaseAddrValue)
Combo2List = $(IRQList)
Combo2Out = $(IRQValue)
Combo3List = $(MemBaseAddrList)
Combo3Out = $(MemBaseAddrValue)
;kpdbg
Combo4List = $(PktSizeList)
Combo4Out = $(PktSizeValue)
Combo5List = $(FHIndList)
Combo5Out = $(FHIndValue)
Combo6List = $(FHPatternList)
Combo6Out = $(FHPatternValue)
Combo7List = $(PowerManList)
Combo7Out = $(PowerManValue)
Combo8List = $(DSChannelList)
Combo8Out = $(DSChannelValue)
ComboListItemsIn = {Combo1List,Combo2List,Combo3List,Combo4List}
ComboListItemsOut = {Combo1Out,Combo2Out,Combo3Out,Combo4Out}
EditTextIn = {$(ESSIDValue)}
EditTextLim = {"32","6"}
CheckItemsIn = {$(Chk1), $(Chk2), $(Chk3), $(Chk4), $(Chk5)}
[IOBaseAddrChoices]
IOBase_1 = "200",512
IOBase_2 = "240",576
IOBase_3 = "280",640
IOBase_4 = "2C0",714
IOBase_5 = "300",768
IOBase_6 = "340",832
IOBase_7 = "380",896
IOBase_8 = "3C0",960
[IRQChoices]
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "7",7
IRQ_5 = "9",9
IRQ_6 = "10",10
IRQ_7 = "11",11
IRQ_8 = "12",12
; IRQ_9 = "15",15
[MemBaseAddrChoices]
Add_1 = "C8000",819200
Add_2 = "C9000",823296
Add_3 = "CA000",827392
Add_4 = "CB000",831488
Add_5 = "CC000",835584
Add_6 = "CD000",839680
Add_7 = "CE000",843776
Add_8 = "CF000",847872
Add_9 = "D0000",851968
Add_10 = "D1000",856064
Add_11 = "D2000",860160
Add_12 = "D3000",864256
Add_13 = "D4000",868352
Add_14 = "D5000",872448
Add_15 = "D6000",876544
Add_16 = "D7000",880640
Add_17 = "D8000",884736
Add_18 = "D9000",888832
Add_19 = "DA000",892928
Add_20 = "DB000",897024
Add_21 = "DC000",901120
Add_22 = "DD000",905216
Add_23 = "DE000",909312
Add_24 = "DF000",913408
[PktSizeChoices]
PktSize_1 = "400",400
PktSize_2 = "500",500
PktSize_3 = "600",600
PktSize_4 = "700",700
PktSize_5 = "800",800
PktSize_6 = "900",900
PktSize_7 = "1000",1000
PktSize_8 = "1100",1100
PktSize_9 = "1200",1200
PktSize_10 = "1300",1300
PktSize_11 = "1400",1400
PktSize_12 = "1500",1500
PktSize_13 = "1550",1550
[FHIndChoices]
FHInd_1 = "1",1
FHInd_2 = "2",2
FHInd_3 = "3",3
FHInd_4 = "4",4
FHInd_5 = "5",5
FHInd_6 = "6",6
FHInd_7 = "7",7
FHInd_8 = "8",8
FHInd_9 = "9",9
FHInd_10 = "10",10
FHInd_11 = "11",11
FHInd_12 = "12",12
FHInd_13 = "13",13
FHInd_14 = "14",14
FHInd_15 = "15",15
FHInd_16 = "16",16
FHInd_17 = "17",17
FHInd_18 = "18",18
FHInd_19 = "19",19
FHInd_20 = "20",20
FHInd_21 = "21",21
FHInd_22 = "22",22
FHInd_23 = "23",23
FHInd_24 = "24",24
FHInd_25 = "25",25
FHInd_26 = "26",26
FHInd_27 = "27",27
FHInd_28 = "28",28
FHInd_29 = "29",29
FHInd_30 = "30",30
FHInd_31 = "31",31
FHInd_32 = "32",32
FHInd_33 = "33",33
FHInd_34 = "34",34
FHInd_35 = "35",35
FHInd_36 = "36",36
FHInd_37 = "37",37
FHInd_38 = "38",38
FHInd_39 = "39",39
FHInd_40 = "40",40
FHInd_41 = "41",41
FHInd_42 = "42",42
FHInd_43 = "43",43
FHInd_44 = "44",44
FHInd_45 = "45",45
FHInd_46 = "46",46
FHInd_47 = "47",47
FHInd_48 = "48",48
FHInd_49 = "49",49
FHInd_50 = "50",50
FHInd_51 = "51",51
FHInd_52 = "52",52
FHInd_53 = "53",53
FHInd_54 = "54",54
FHInd_55 = "55",55
FHInd_56 = "56",56
FHInd_57 = "57",57
FHInd_58 = "58",58
FHInd_59 = "59",59
FHInd_60 = "60",60
FHInd_61 = "61",61
FHInd_62 = "62",62
FHInd_63 = "63",63
FHInd_64 = "64",64
FHInd_65 = "65",65
FHInd_66 = "66",66
FHInd_67 = "67",67
FHInd_68 = "68",68
FHInd_69 = "69",69
FHInd_70 = "70",70
FHInd_71 = "71",71
FHInd_72 = "72",72
FHInd_73 = "73",73
FHInd_74 = "74",74
FHInd_75 = "75",75
FHInd_76 = "76",76
FHInd_77 = "77",77
FHInd_78 = "78",78
FHInd_79 = "79",79
[FHPatternChoices]
FHPattern_1 = "1",1
FHPattern_2 = "2",2
FHPattern_3 = "3",3
[DSChannelChoices]
DSChannel_1 = "1",1
DSChannel_2 = "2",2
DSChannel_3 = "3",3
DSChannel_4 = "4",4
DSChannel_5 = "5",5
DSChannel_6 = "6",6
DSChannel_7 = "7",7
DSChannel_8 = "8",8
DSChannel_9 = "9",9
DSChannel_10 = "10",10
DSChannel_11= "11",11
DSChannel_12 = "12",12
DSChannel_13 = "13",13
DSChannel_14 = "14",14
[PowerManChoices]
PowerMan_1 = "disabled",0
PowerMan_2 = "enabled",1
PowerMan_3 = "auto",2
[IrqConflictMsgDlg]
DlgType = "MessageBox"
STF_MB_TITLE = "MELCO WLI-PCM Network Adapter Setup"
STF_MB_TEXT = "±ÌＩＲＱレベルͼÌボードª使用µÄ¢Ü·。ÊÌ値ð選ðµÄ¾³¢。"
STF_MB_TYPE = 1 ; OK button
STF_MB_ICON = 5 ; ! icon
STF_MB_DEF = 1 ; default button is OK
[IoConflictMsgDlg]
DlgType = "MessageBox"
STF_MB_TITLE = "MELCO WLI-PCM Network Adapter Setup"
STF_MB_TEXT = "±ÌＩ／ＯポートアドレスͼÌボードª使用µÄ¢Ü·。ÊÌ値ð選ðµÄ¾³¢。"
STF_MB_TYPE = 1 ; OK button
STF_MB_ICON = 5 ; ! icon
STF_MB_DEF = 1 ; default button is OK
[MemConflictMsgDlg]
DlgType = "MessageBox"
STF_MB_TITLE = "MELCO WLI-PCM Network Adapter Setup"
STF_MB_TEXT = "±ÌメモリベースアドレスͼÌボードª使用µÄ¢Ü·。ÊÌ値ð選ðµÄ¾³¢。"
STF_MB_TYPE = 1 ; OK button
STF_MB_ICON = 5 ; ! icon
STF_MB_DEF = 1 ; default button is OK
[ExCreateRegKey]
Debug-Output "******************Entering [ExCreateRegKey]******************"
set ECR_Result = NO_ERROR
set ECR_BaseKeyHandle = $($0)
set ECR_NewPath = $($1)
set KeyNull = ""
set MAXIMUM_ALLOWED = 33554432
Debug-Output "ExCreateRegKey - ECR_BaseKeyHandle = "$(ECR_BaseKeyHandle)
Debug-Output " ECR_NewPath = "$(ECR_NewPath)
Debug-Output " MAXIMUM_ALLOWED = "$(MAXIMUM_ALLOWED)
Debug-Output " KeyNull = "$(KeyNull)
OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_NewPath) $(MAXIMUM_ALLOWED) +
ECR_BaseKey
Debug-Output "ECR_BaseKey = "$(ECR_BaseKey)
Debug-Output " OpenRegKey returned "$($R0)
Ifstr $(ECR_BaseKey) == $(KeyNull)
Debug-Output "ECR_BaseKey == KeyNull"
Else
Debug-Output "ECR_BaseKey != KeyNull"
set ECR_KeyHandle = $(ECR_BaseKey)
goto ECR_Return
Endif
set ECR_TmpPath = ""
Split-String $(ECR_NewPath) "\" ECR_PList
Debug-Output "ECR_PList = "$(ECR_PList)
ForListDo $(ECR_PList)
Ifstr(i) $($) != "\"
Ifint $(#) == 1
set ECR_TmpPath = $($)
Else
set ECR_TmpPath = $(ECR_TmpPath)"\"$($)
Endif
Debug-Output "Determining if "$(ECR_TmpPath)" exists"
OpenRegKey $(ECR_BaseKeyHandle) "" $(ECR_TmpPath) $(MAXIMUM_ALLOWED) ECR_BaseKey
Ifstr $(ECR_BaseKey) == $(KeyNull)
Debug-Output "Creating "$(ECR_TmpPath)
CreateRegKey $(ECR_BaseKeyHandle) {$(ECR_TmpPath),0,GenericClass} "" $(MAXIMUM_ALLOWED) "" ECR_KeyHandle
Ifstr(i) $(ECR_KeyHandle) == $(KeyNull)
set ECR_Result = $($R0)
goto ECR_Return
Endif
Endif
Endif
EndForListDo
ECR_Return = +
return $(ECR_Result) $(ECR_KeyHandle)
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.