1. ASUS_USB_Boost_Win32_64.zip Driver
  2. English.ini File Contents

English.ini Driver File Contents (ASUS_USB_Boost_Win32_64.zip)

ÿþ

[Translations]

LoadLineNote=Allows you to adjust the voltage range to control CPU Load Line. Adjust to a high value for system performance or to a low value for power efficiency.

LoadLineNoteGM=The voltage droop during CPU loading can be calibrated to improve overclocking stability.

LoadLineNoteST=Allows for compensation of the voltage drop when the CPU is loading. It allows you to adjust the voltage settings and control the system temperatures.

LoadLineNoteX58=Load-line is defined by the Intel voltage regulator module (VRM) that affects CPU voltage. A higher load-line calibration results in a higher voltage and good overclocking performance but also increases the CPU and VRM thermal column.

LoadLineWarning0=The actual performance boost may vary depending on your CPU specification.

LoadLineWarning0ST=The actual temperatures may vary depending on your CPU specification.

LoadLineWarning1=Do not remove the thermal module. The thermal conditions should be monitored.

CapabilityNote=A higher value brings a wider total power range and extends the overclocking frequency range simultaneously.

CapabilityNoteST=Allows you to adjust the CPU base range or overcurrent capability.

FrequencyNote=Enable Spread Spectrum to enhance system stability.

FrequencyNoteST=Allows you to adjusts the CPU switching frequency.

FrequencyNoteX58=Switching Frequency affects the VRM transient response and component thermal conditions. Higher frequency gets quicker transient response. Enable Active Frequency Mode for enhanced power saving condition.

FrequencyWarning0=For CPU Fixed Frequency Mode, assign a fixed high CPU frequency to increase O.C Range or a low VRM frequency for better system stability.

FrequencyWarning0ST=For CPU Fixed Frequency Mode, assign a fixed low CPU frequency for a stable system temperature.

FrequencyWarning1=Do not remove the thermal module when switching to Manual mode. The thermal conditions should be monitored.

PhaseControlNoteX58=Phase number is the number of working VRM phase(s). Choose Extreme: Full Phase mode when the system loading is heavy to get more transient response and better thermal performance.

PhaseControlStandard=(1) Standard: Phase control based on CPU command.

PhaseControlOptimized=(2) Optimized: ASUS optimized phase tuning profile.

PhaseControlExtreme=(3) Extreme: Full phase mode.

PhaseControlManualAdjustment=(4) Manual Adjustment: Phase number adjusted by current(A) step.

PhaseControlStandardST=(1) Standard    Based on CPU phase specifications.

PhaseControlOptimizedST=(2) Optimized   Based on ASUS internal phase balancing design.

PhaseControlExtremeST=(3) Extreme   Enables and maintains active full stage phase array.

PhaseControlManualAdjustmentST=(4) Manual Adjustment   Allows you to manually adjust the current [current (A) step] that each phase will tolerate.

PhaseControlExtremeX58=(2) Extreme: Full phase mode

PhaseControlWarning0=Set Manual Adjustment to a fast phase response to increase system performance or to a slow phase response to increase CPU power efficiency.

PhaseControlWarning0ST=Adjust to a slow phase response to increase CPU power efficiency.

PhaseControlWarning1=Do not remove the thermal module when switching to Extreme and Manual mode. The thermal conditions should be monitored.

PhaseControlWarningX58=Do not remove the thermal module when switching to Extreme mode.

DutyControlNoteX58=DIGI+ VRM Duty Control adjusts the current of every VRM phase and the thermal of every phase component.

DutyControlTProbe=(1) T.Probe: Thermal balance.

DutyControlExtreme=(2) Extreme: Current balance.

DutyControlTProbeST=(1) T.Probe Thermal   Balances the load on the power phases based on the phase bank temperature.

DutyControlExtremeST=(2) C.Probe Current -  Balances the load on the power phases based on the current system load.

DutyControlWarning=Do not remove the thermal module. The thermal conditions should be monitored.

Apply=Apply

Undo=Undo

PowerSaving=Power Saving

Efficiency=Efficiency

Performance=Performance

IncreaseOCRange=Increase O.C. Range

SystemStability=System Stability

CPUNBLoadLineNote=CPU/NB Load Line controls the behavior of the DRAM Controller. Adjust to a high value for better system performance or to a low value for a better thermal solution.

CPUNBLoadLineNoteST=Allows for compensation of the voltage drop when the DRAM controller is loading. It allows you to adjust the voltage settings and control the system temperatures.

Thermal=Thermal

CPUNBLoadLineWarning0=The actual performance boost may vary depending on your CPU and DRAM specification.

CPUNBLoadLineWarning1=Do not remove the thermal module. The thermal conditions should be monitored.

CPUNBCapabilityNote=Adjusting to a high value brings a high DRAM Controller power range and extends the overclocking frequency range simultaneously.

CPUNBCapabilityNoteST=Allows you to adjust the DRAM controller base range or overcurrent capability.

GPULoadLineNote=iGPU Load Line is based on Intel VRM specifications and affects iGPU voltage. Adjusting to a high value results to a high iGPU voltage and good performance but increases the CPU and VRM temperatures.

GPUCapabilityNote=To enhance iGPU performance, adjust to a high value for a high iGPU power and overclocking frequency range.

VCCSALoadLineNote=The behaviour of the DRAM Controller is decided by VCCSA Load-Line. Set to a higher value for system performance, or to a lower value for better thermal solution.

VCCSALoadLineNoteST=Allows for compensation of the voltage drop when the DRAM controller is loading. It allows you to adjust the voltage settings and control the system temperatures.

VCCSALoadLineWarning0=The actual performance boost may vary depending on your CPU and DRAM specification.

VCCSALoadLineWarning1=Do not remove the thermal module. The thermal conditions should be monitored.

VCCSACapabilityNote=A higher value brings wider total DRAM Controller power range and extends the overclocking frequency range simultaneously.

VCCSACapabilityNoteST=Allows you to adjust the DRAM controller base range or overcurrent capability.

DRAMCapabilityNote=A higher value brings a wider total power range and extends the overclocking frequency range simultaneously.

DRAMFrequencyNote=Allows you to adjust the DRAM switching frequency.

DRAMFrequencyWarning=Assign a fixed high DRAM frequency to increase O.C Range or a low DRAM frequency for better system stability.

DRAMPhaseControlOptimizedNote=(1) Optimized: ASUS optimized phase tuning profile

DRAMPhaseControlExtremeNote=(2) Extreme: Full phase mode

Back=Back

VCCSAFrequencyNote=Changing the frequency affects the transient response and component thermal conditions.Higher frequency gets quicker transient response.

OverTempProtectionNote=To protect the motherboard from overheating accidents, we recommend that you keep this setting to [Auto].

SmartModeContent=Quickly delivers optimized VRM frequency, voltage and current for superior CPU/DRAM overclocking performance with one click.

PowerSavingModeContent=CPU power usage will be limited to a specific wattage you select to achieve the best digital power saving conditions.

SmartModeWarning0=Click OC Now! button to adjust the ratio settings in TurboV EVO.

SmartModeWarning1=Thermal conditions should be monitored.

SmartModeDefault=Sets your CPU/DRAM power to the default settings.

OpenTurboVEVOFailWaring=Please install TurboV EVO to easily adjust the CPU frequencies and ratios for an ultimate overclocking performance.

PowerSavingDefault=Sets your power consumptions to the CPU default setting.

RatioApplyWarning=Enabling this function may decrease the total power delivery to the CPU and affect the CPU performance under a heavy system load. The system will restore to its default settings on the next startup.

CPUPowerResponseNote=The VRM controller provides a faster and precise power response rate for CPU. Apply a higher value for an extreme overclocking.

CPUPowerResponseWarning=The actual performance boost may vary depending on your CPU specification.

CPUPowerThermalNote=A higher temperature brings a wider CPU power thermal range and extends the overclocking tolerance to enlarge O.C. potential.

CPUPowerThermalWarning=Do not remove the thermal module. The thermal conditions should be monitored.

DRAMPowerThermalNote=A higher temperature brings a wider DRAM power thermal range and extends the overclocking tolerance to enlarge O.C. potential.

DRAMPowerThermalWarning=Do not remove the thermal module. The thermal conditions should be monitored.

SmartDIGIExplanation=Offers an ultimate digital power overclocking performance and Intel VRD 12.5 ready CPU Wattage adjustments.

CPUPowerExplanation=Offers precise digital power control for CPU.

DRAMPowerExplanation=Offers precise digital power control for DRAM.

Default=Default

Warning=Warning

Yes=Yes

No=No

OK=OK

Cancel=Cancel

VRHotCapabilityNote=To protect the motherboard from overheating accidents, we recommend that you keep this setting to [Default].

Celsius=°C

Close=Close

CPUPowerExplanationTitle=CPU Power

DRAMPowerExplanationTitle=DRAM Power

CPUPowerExplanationInSimplifiedMode=Offers precise digital power control for CPU and CPU/NB to enhance efficiency, stability, and performance for overclocking scenarios.

DRAMPowerExplanationInSimplifiedMode=Offers precise digital power control forDRAM to enhance efficiency, stability, and performance for overclocking scenarios.

CPUNBPowerResponseNote=The CPU/NB controller provides a faster and precise power response rate for CPU/DRAM. Apply a higher value for an extreme overclocking.

CPUNBPowerResponseWarning=The actual performance boost may vary depending on your CPU/DRAM specification.

OCNow=Adjust the ratio settings in TurboV.

ApplyWarn=Do you want to load the CPU/DRAM power settings?

ApplyWarn2=The setting may cause your system unstable. Do you want to continue?

SureApply=The settings have been applied.

CPUPowerControl=CPU Power Control

DRAMPowerControl=DRAM Power Control

Monitor=Sensor

Minimize=Minimize

Expand=Enlarge

Shrink=Reduce

Next=Next

Save=Save

Load=Load

Delete=Delete

Calibrate=Calibrate

CPUFanSpeed=CPU Fan Speed

FanName=Fan Name

FanPosition=Fan Position

CpuFan=CPU Fan

ChassisFan=Chassis Fan

Profile=Profile

Setting=Setting

Test=Test

Testing=Testing...

FanPower=Fan Power

FanSpeed=Fan Speed

Temperature=Temperature

Disable=Disable

Standard=Standard

Silent=Silent

Turbo=Turbo

Intelligent=Intelligent

Stable=Stable

User=User

Optimal=Standard

Manual=User

Refresh=Refresh

CpuTempWarn=Test your CPU fan speed in different fan power output. To ensure the accuracy, please test under normal CPU temperature.

TempWarn=Test your fan speed in different fan power output. To ensure the accuracy, please test under normal CPU temperature.

The current operation will be terminated. Do you want to continue?=The current operation will be terminated. Do you want to continue?

ClickToEdit=Click to edit the fan name.

Start=Start

Stop=Stop

Save Profile=Save Profile

Load Profile=Load Profile

New Profile=New Profile:

Saved Profile=Saved Profile:

NoTunning=Please run Fan Auto Tuning to get the best customized settings for your fans.

NoFanWarning=Please ensure that your fan is connected before you run  Fan Auto Tuning , or click Fan Auto Tuning to start tuning now.

UnControlWarning=The fan's speed cannot be controlled. Click Auto Tuning to get the best customized settings for your fans.

AutoStop=Auto-Fan Stop

AutoStopHint=This fan can be set to stop when CPU temperature is below 75 degrees.

Sensitivity=Fan Reaction Speed

StepUp=Fan Spin Up Time:

StepUpHint=Extension: Avoids generating unpleasant noise due to the vast change in the fan speed.\nReduction: Enhances relative heat dissipation capability.

StepDown=Fan Spin Down Time:

StepDownHint=Extension: Avoid generating unpleasant noise due to the vast change in the fan speed, while enhancing relative heat dissipation capability.\nReduction: Provide relatively faster reduction in fan noise over time.

FanXpert2 Intro=FAN Xpert 2 automatically detects and tweaks all fan speeds, and provides you with optimized fan settings based on the fans' specifications and positions.

NoTunningDialog=Please run  Fan Auto Tuning  to get the best customized settings for your fans.

Fan Tuning=Fan Tuning

Fan Position=Fan Position

Front Fan=Front Fan

Back Fan=Back Fan

Side Fan=Side Fan

Top Fan=Top Fan

Bottom Fan=Bottom Fan

Unknown=Unknown

N/A=N/A

ChooseFanPosition=Choose Fan Position

FanDescriptionTitle=Become a Fan Expert effortlessly!

FanDescription001=The system is now detecting each fan's unique characteristics.

FanDescription002=After Fan Auto Tuning, you can now select from four pre-defined fan profiles in Fan Xpert 2.

FanDescription003=You can adjust the slider to control each fan's speed.

FanDescription004=The system automatically provides customized profiles based on the CPU/chassis fan locations.

FanXpertDescription001=The system is now detecting each fan's unique characteristics.

FanXpertDescription002=After Fan Auto Tuning, you can now select from four pre-defined fan profiles in Fan Xpert.

FanXpertDescription003=You can adjust the slider to control each fan's speed.

FanXpertDescription004=The system automatically provides customized profiles based on the CPU/chassis fan locations.

Search=Search

FullSpeed=Full Speed

MaximumSpeed=Maximum Speed:

MinimumSpeed=Minimum Speed:

RpmOfFanStop=Minimum Speed:

RpmOfFanStart=Fan run when power is higher than:

ControllableRange=Controllable Range:

Description=Description:

Advance=Advance Mode

FanAutoTuning=Fan Auto Tuning

BackSimple=Back to Easy Mode

FanInformation=Fan Information

ChangeTabel=Change Display

FanControl=Fan Control

SearchTitle=Fan Position Search

SearchDialog=The selected fan is operating at full speed and the others are stopped or slow down.

Edit=Edit

SmartMode=Smart Mode

RpmMode=RPM Fix Mode

Overwrite=Profile exists, overwrite it

OptionNA=To correctly display the OPT Fan temperature, connect the thermal sensor to the OPT Temp header.

Fast=Fast

Slow=Slow

Active Frequency Mode Des=Enable Active Frequency Mode for enhanced power saving condition.

RebootWarn=It needs to reboot the system to make your change to take effect. Are you sure you want to reboot?

FanBenchmark=Fan Benchmark Evaluation will be performed. Do you want to continue?

Available=Available

cTdpWarn=Enabling the Configured Max CPU Power may decrease the total power delivery to the CPU, and affect the CPU performance under a heavy system load. The system will now restart.

cTdpDesc=Enabling the Configured Max CPU Power may decrease the total power delivery to the CPU, and affect the CPU performance under a heavy system load. The system will now restart.

SataDesc=Provides better energy efficiency by shutting down unused add-on SATA ports to reduce total power consumption.

EPUDescriptionTitle=Get Total System-wide Energy Optimization with EPU

EPUDescription=The system automatically changes its power-saving condition based on the current usage.

DigitExplanation=By default, DIGI+ Power Control is enabled to deliver optimal balance between performance and power efficiency.

AskFanAutoTuneTip=Please run Fan Auto Tuning to get the best customized settings for your fans.

4WayOptimiaztionDescription=Click 4-Way Optimization to automatically detect the best settings based on actual usage.\nAway mode will be enabled to minimize power use and fan noise.

PowerSavingFormula=Power Saving Formula

Notice=Note :

Recommendation=Recommendation :

SetFanDescription=For better cooling condition, configure the fan speeds based on the fans' locations.

AdvancedSettings=Advanced Settings

TurningCountDown=Congratulations!\nAuto tuning will start in one minute for an enhanced system performance.

TuningWarning=Do you want to continue?

TpuTuneWarning=The system starts performance tuning and may reboot 2 to 3 times. The CPU/DRAM settings will be modified accordingly. Please do not manually restart the PC during the tuning process.

DIGIDescription=DIGI+ Power Control is now dynamically adjusting the power phase and frequency for optimal power saving condition.

FanBenchmarkDescription=This value indicates the rise in CPU temperature for every 1 watt of power that the CPU consumes.\nA low value denotes a good CPU cooling environment, which can be achieved via ASUS Fan Xpert 2.

TpuTuneReportDesc=When you run a third-party stress test such as Aida 64, Prime 95, or OCCT, the core voltage may exceed the adaptive Vcore voltage. This may reduce the CPU frequency due to a high temperature. If you want to use third-party stress tests, manually configure the Vcore voltage.

Benchmark Throuttling Title = "System throttle"

Benchmark Throuttling String = "Fan Xpert 2 cannot assess the thermal condition. The CPU temperature is over the maximum assessment limit. Check the CPU fan installation and try running the assessment again."

Benchmark Throuttling String FanXpert= "Fan Xpert cannot assess the thermal condition. The CPU temperature is over the maximum assessment limit. Check the CPU fan installation and try running the assessment again."

Benchmark Unstable Title=System timeout

Benchmark Unstable String=Fan Xpert 2 cannot assess the thermal condition. The CPU temperature is not reaching the balance point for pre-system or post-system load. Close all programs running in the background and try running the assessment again.

Benchmark Unstable String FanXpert=Fan Xpert cannot assess the thermal condition. The CPU temperature is not reaching the balance point for pre-system or post-system load. Close all programs running in the background and try running the assessment again.

Unsupport lang title=Warning

Unsupport lang string=When naming a file, the app only recognizes symbols and languages that Windows® OS natively supports.



GPIO34 Has Wrong Title=Warning

GPIO34 Has Wrong String=CPU fan has been changed. Run Fan Auto Tuning again for optimal and controllable CPU fan settings.



GPIO34Tip=When using a 3-pin CPU fan, set CPU Q-Fan Control to [Advanced Mode].

CpuRatioOnDescription=Click ON to activate the CPU Ratio. The system automatically reboots for the changes to take effect.



FanXpertBenchmarkDescription=This value indicates the rise in CPU temperature for every 1 watt of power that the CPU consumes.\nA low value denotes a good CPU cooling environment, which can be achieved via ASUS Fan Xpert.

Voltage Decrement=Voltage Decrement

auto=auto

For CPU voltage downgrade, OS may be unstable. Do you want to continue?=For CPU voltage downgrade, OS may be unstable. Do you want to continue?

Enable Away Mode=Enable Away Mode

Power Plan=Power Plan

Monitor Off=Monitor Off

Sleep=Sleep

Fan Profile=Fan Profile

High Performance=High Performance

Max Power Saving=Max Power Saving

Configured Max CPU Power=Configured Max CPU Power

Mute=Mute

Add-on USB Controller Power=Add-on USB Controller Power

Cut off USB ports power when device is not attached=Cut off USB ports power when device is not attached

Cut off USB ports power when device is attached and can be safely removed
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web1, load: 1.93