usbhub3.inf Driver File Contents (3com-3c2000-t-gigabit-adapter_Win.zip)

ÿþ;

; usbhub3.inf

;

; Copyright (c) Microsoft Corporation. All rights reserved.

;



[Version]

signature="$Windows NT$"

Class=USB

ClassGUID={36FC9E60-C465-11CF-8056-444553540000}

Provider=%Msft%

PnpLockdown=1

DriverVer = 05/05/2020,10.0.18362.836



[SourceDisksNames]

3426=windows cd



[SourceDisksFiles]

usbhub3.sys  = 3426



[ControlFlags]

BasicDriverOk=*

ExcludeFromSelect = *



[DestinationDirs]

DefaultDestDir    = 12



[Manufacturer]

%Generic.Mfg%=Generic,NTamd64



[SignatureAttributes]

usbhub3.sys=SignatureAttributes.DRM



[SignatureAttributes.DRM]

DRMLevel=1300



;

; ---------------------- HUB3 Controllers ----------------------

;



[Generic.NTamd64]

%UsbHub3.RootHubDeviceDesc%=Generic.Install, USB\ROOT_HUB30

%UsbHub3.Usb30HubDesc%=Generic.Install, USB\USB30_HUB

%UsbHub3.Usb20HubDesc%=Generic.Install, USB\USB20_HUB



[Generic.Install.NT]

CopyFiles=Generic.CopyFiles

AddPowerSetting=USB3.PO1, USB3.PO2

;

; FeatureScore values between 0x00-0x7F are reserved. Values 0x81-0xFE are for OEMs.

;

FeatureScore=80





[Generic.Install.NT.Services]

AddService=USBHUB3, 2, Generic.AddService



[Generic.AddService]

DisplayName    = %UsbHub3.SVCDESC%

ServiceType    = 1               ; SERVICE_KERNEL_DRIVER

StartType      = 3               ; SERVICE_DEMAND_START 

ErrorControl   = 1               ; SERVICE_ERROR_NORMAL

ServiceBinary  = %12%\UsbHub3.sys

LoadOrderGroup = Base

AddReg         = Service_AddReg



[Generic.Install.NT.WMI]

; Set access permissions for UI WMI GUIDs

WMIInterface = {4E623B20-CB14-11D1-B331-00A0C959BBD2},,WMIGuidSecurity_AllRights

WMIInterface = {9bbbf831-a2f2-43b4-96d1-86944b5914b3},,WMIGuidSecurity_AllRights

WMIInterface = {9C179357-DC7A-4f41-B66B-323B9DDCB5B1},,WMIGuidSecurity_AllReadAdminFul



[WMIGuidSecurity_AllReadAdminFul]

security="O:BAG:BAD:(A;;GA;;;BA)(A;;GA;;;LS)(A;;GA;;;NS)(A;;GA;;;SY)(A;;GR;;;BU)"



[WMIGuidSecurity_AllRights]

security="O:BAG:BAD:(A;;0x12001f;;;BA)(A;;0x12001f;;;LS)(A;;0x12001f;;;NS)(A;;0x12001f;;;SY)(A;;0x12001f;;;BU)"



[Service_AddReg]

HKR,               , BootFlags,  0x00010001, 16 ; CM_SERVICE_USB3_DISK_BOOT_LOAD

HKR, Parameters\Wdf, LogPages,   0x00010001, 3 ; KMDF IFR size

HKR, Parameters,     LogPages,   0x00010001, 3 ; Driver IFR size

;

; Create a dummy usbhub services key because UxD relies on it.

;

HKLM, SYSTEM\CurrentControlSet\Services\usbhub,,0x00000010



[Generic.CopyFiles]

USBHUB3.SYS,,,0x100



[USB3.PO1]

SubGroup = %GUID_POWER_USB_SUBGROUP%

Setting = %GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY%, %USB3LPMPolicyName%, %USB3LPMPolicyDescription%, ,1

Value= 0, %ValueOff%, %ValueOffDesc%, %FLG_ADDREG_TYPE_DWORD%, 0x0

Value= 1, %ValueMinimumPowerSavings%, %ValueMinimumPowerSavingsDesc%, %FLG_ADDREG_TYPE_DWORD%, 0x1

Value= 2, %ValueModeratePowerSavings%, %ValueModeratePowerSavingsDesc%, %FLG_ADDREG_TYPE_DWORD%, 0x2

Value= 3, %ValueMaximumPowerSavings%, %ValueMaximumPowerSavingsDesc%, %FLG_ADDREG_TYPE_DWORD%, 0x3



Default = %GUID_MIN_POWER_SAVINGS%, %AC%, 2

Default = %GUID_MIN_POWER_SAVINGS%, %DC%, 2

Default = %GUID_MAX_POWER_SAVINGS%, %AC%, 2

Default = %GUID_MAX_POWER_SAVINGS%, %DC%, 2

Default = %GUID_TYPICAL_POWER_SAVINGS%, %AC%, 2

Default = %GUID_TYPICAL_POWER_SAVINGS%, %DC%, 2





[USB3.PO2]

SubGroup = %GUID_POWER_USB_SUBGROUP% 

Setting = %GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT%, %SelectiveSuspendTimeoutName%, %SelectiveSuspendTimeoutDescription%, ,1

ValueRange = 0, 100000, 1, %Millisecond%



Default = %GUID_MIN_POWER_SAVINGS%, %AC%, 50

Default = %GUID_MIN_POWER_SAVINGS%, %DC%, 50

Default = %GUID_MAX_POWER_SAVINGS%, %AC%, 50

Default = %GUID_MAX_POWER_SAVINGS%, %DC%, 50

Default = %GUID_TYPICAL_POWER_SAVINGS%, %AC%, 50

Default = %GUID_TYPICAL_POWER_SAVINGS%, %DC%, 50



;

; --------------------------- Strings --------------------------

;



[Strings]

;Non-Localizable

Msft = "Microsoft"

GUID_MAX_POWER_SAVINGS = "{a1841308-3541-4fab-bc81-f71556f20b4a}"

GUID_TYPICAL_POWER_SAVINGS = "{381b4222-f694-41f0-9685-ff5bb260df2e}"

GUID_MIN_POWER_SAVINGS = "{8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c}"

AC = 0

DC = 1

FLG_ADDREG_TYPE_DWORD = 0x00010001

GUID_POWER_USB_SUBGROUP= "{2A737441-1930-4402-8D77-B2BEBBA308A3}"

GUID_POWER_USB_3_LINK_POWER_MANAGEMENT_POLICY= "{D4E98F31-5FFE-4ce1-BE31-1B38B384C009}"

GUID_POWER_HUB_SELECTIVE_SUSPEND_TIMEOUT= "{0853A681-27C8-4100-A2FD-82013E970683}"



;Localizable

Generic.Mfg = "(Standard USB HUBs)"

UsbHub3.RootHubDeviceDesc = "USB Root Hub (USB 3.0)"

UsbHub3.Usb30HubDesc = "Generic SuperSpeed USB Hub"

UsbHub3.Usb20HubDesc = "Generic USB Hub"

UsbHub3.SVCDESC = "SuperSpeed Hub"



USB3LPMPolicyName = "USB 3 Link Power Mangement"

USB3LPMPolicyDescription = "Specifies the power management policy to use for USB 3 links when they are idle "

ValueOff="Off"

ValueOffDesc="Do not enable the U1 U2 states"

ValueMinimumPowerSavings = "Minimum power savings"

ValueModeratePowerSavings = "Moderate power savings"

ValueMaximumPowerSavings = "Maximum power savings"

ValueMinimumPowerSavingsDesc = "Enable the U1 U2 states but choose conservative timeout values to optimize for peformance"

ValueModeratePowerSavingsDesc = "Enable the U1 U2 states and choose optimal timeout values to balance power and peformance"

ValueMaximumPowerSavingsDesc = "Enable the U1 U2 states and choose aggressive timeout values to optimize for power"

SelectiveSuspendTimeoutName = "Hub Selective Suspend Timeout"

SelectiveSuspendTimeoutDescription = "This value will be used as idle timeouts for all USB hubs"

Millisecond = "Millisecond"

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.73