stornvme.inf Driver File Contents (3com-3c2000-t-gigabit-adapter_Win.zip)

ÿþ;

; Copyright (c) Microsoft Corporation, 2012

;



[Version]

Signature   = "$WINDOWS NT$"

Class       = SCSIAdapter

ClassGUID   = {4D36E97B-E325-11CE-BFC1-08002BE10318}

Provider    = %MSFT%

PnpLockdown = 1

DriverVer = 06/21/2006,10.0.18362.693



[SourceDisksNames]

;3426 = windows cd

1 = %DiskName%,,,



[SourceDisksFiles]

;stornvme.sys = 3426

stornvme.sys = 1



[DestinationDirs]

; DIRID_DRIVERS

DefaultDestDir = 12



[ControlFlags]

BasicDriverOk = *

ExcludeFromSelect = *



[Manufacturer]

%MS-NVME% = NVME, NTamd64



[NVME.NTamd64]

%PCI\CC_010802.DeviceDesc% = Stornvme_Inst, PCI\CC_010802



[Stornvme_Inst]

CopyFiles = Stornvme_copyfiles

AddPowerSetting = NVMePowerSetting1,NVMePowerSetting2,NVMePowerSetting3,NVMePowerSetting4



[Stornvme_copyfiles]

stornvme.sys,,,0x100



[Stornvme_Inst.HW]

AddReg = Stornvme_Inst_HW_AddReg



[Stornvme_Inst_HW_AddReg]

; registry values related to MSI support

HKR, Interrupt Management, 0x00000010

HKR, Interrupt Management\MessageSignaledInterruptProperties, 0x00000010

HKR, Interrupt Management\Affinity Policy, 0x00000010



;

; The MSISupported entry determines whether the device supports MSIs. Set it to 1 to enable MSI support.

;

HKR, Interrupt Management\MessageSignaledInterruptProperties, MSISupported,       %REG_DWORD%,   1



;

; The MessageNumberLimit entry specifies the maximum number of MSIs to allocate. 

; For PCI 2.2, MessageNumberLimit must be 1, 2, 4, 8, or 16. For PCI 3.0, MessageNumberLimit can be any number up to 2,048.

; Set it to 65 so that 64 IO Queues and 1 Admin Queue can have different messages.

; Note that this number should be increased to "Processor Count + 1" if the driver runs on machine with more processors.

;

HKR, Interrupt Management\MessageSignaledInterruptProperties, MessageNumberLimit, %REG_DWORD%,   65



;

; Make sure all processor in group are used to serve interrupt from this device. IrqPolicySpreadMessagesAcrossAllProcessors (5)

;

HKR, Interrupt Management\Affinity Policy, DevicePolicy,   %REG_DWORD%, 5



;

; Specifies that the device's interrupts are of high priority. This setting is appropriate for devices that require low latency. IrqPriorityHigh (3)

;

HKR, Interrupt Management\Affinity Policy, DevicePriority, %REG_DWORD%, 3



;

; Allow interrupts on processors beyond group 0. (e.g. might be in a single group other than 0)

;

HKR, Interrupt Management\Affinity Policy, GroupPolicy, %REG_DWORD%, 1



[Stornvme_Inst.Services]

AddService = stornvme, %SPSVCINST_ASSOCSERVICE%, Stornvme_Service_Inst, Stornvme_EventLog_Inst



[Stornvme_Service_Inst]

DisplayName    = %StorNVMe_ServiceDesc%

ServiceType    = %SERVICE_KERNEL_DRIVER%

StartType      = %SERVICE_BOOT_START%

ErrorControl   = %SERVICE_ERROR_CRITICAL%

ServiceBinary  = %12%\stornvme.sys

LoadOrderGroup = SCSI Miniport



AddReg         = nvme_registry_values

AddReg         = nvme_registry_device_specific_values



[nvme_registry_values]

HKR, "Parameters\PnpInterface", "5", %REG_DWORD%, 0x00000001



; NOTE: bustype 0x11 is value of BusTypeNVMe

HKR, "Parameters", "BusType", %REG_DWORD%, 0x00000011



; Default timeout value 10 seconds

HKR, "Parameters", "IoTimeoutValue", %REG_DWORD%, 0x0000000A



; Default DMAR settings 2, where 2 = opt in, but only for external hot-plug devices

HKR, "Parameters", "DmaRemappingCompatible", %REG_DWORD%, 2

HKR, "Parameters", "DmaRemappingOnHiberPath", %REG_DWORD%, 1



[nvme_registry_device_specific_values]

HKR, "Parameters\Device", "IoStripeAlignment", %REG_MULTI_SZ_APPEND%, "VEN_8086&DEV_0953&REV_?? 128"

HKR, "Parameters\Device", "IoStripeAlignment", %REG_MULTI_SZ_APPEND%, "VEN_8086&DEV_0984&REV_?? 128"

HKR, "Parameters\Device", "IoStripeAlignment", %REG_MULTI_SZ_APPEND%, "VEN_8086&DEV_0A53&REV_?? 128"

HKR, "Parameters\Device", "IoStripeAlignment", %REG_MULTI_SZ_APPEND%, "VEN_8086&DEV_0A54&REV_?? 128"

HKR, "Parameters\Device", "IoStripeAlignment", %REG_MULTI_SZ_APPEND%, "VEN_8086&DEV_0A55&REV_?? 128"





[Stornvme_EventLog_Inst]

AddReg = Stornvme_EventLog_AddReg



[Stornvme_EventLog_AddReg]

HKR,, EventMessageFile, %REG_EXPAND_SZ%, "%%SystemRoot%%\System32\IoLogMsg.dll"

HKR,, TypesSupported,   %REG_DWORD%,     7



[NVMePowerSetting1]

; Disk subgroup

Subgroup = {0012ee47-9041-4b5d-9b77-535fba8b1442}

; Primary NVMe Power State Transition Latency Tolerance (ms)

Setting =  {FC95AF4D-40E7-4B6D-835A-56D131DBC80E}, %NVMePowerLatencyToleranceName1%, %NVMePowerLatencyToleranceDesc1%,,0x00000001

; Range 0 to 1 minute (unit: ms)

ValueRange = 0, 60000, 1, %Milliseconds%



; High Performance

Default = {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C}, 0, 0

Default = {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C}, 1, 10

; Balanced

Default = {381B4222-F694-41F0-9685-FF5BB260DF2E}, 0, 15

Default = {381B4222-F694-41F0-9685-FF5BB260DF2E}, 1, 50

; Power Saving

Default = {A1841308-3541-4FAB-BC81-F71556F20B4A}, 0, 100

Default = {A1841308-3541-4FAB-BC81-F71556F20B4A}, 1, 200



[NVMePowerSetting2]

; Disk subgroup

Subgroup = {0012ee47-9041-4b5d-9b77-535fba8b1442}

; Primary NVMe Idle Timeout (ms)

Setting =  {D639518A-E56D-4345-8AF2-B9F32FB26109}, %NVMeIdleTimeoutName1%, %NVMeIdleTimeoutDesc1%,,0x00000001

; Range 0 to 1 minute (unit: ms)

ValueRange = 0, 60000, 1, %Milliseconds%



; High Performance

Default = {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C}, 0, 200

Default = {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C}, 1, 200

; Balanced

Default = {381B4222-F694-41F0-9685-FF5BB260DF2E}, 0, 200

Default = {381B4222-F694-41F0-9685-FF5BB260DF2E}, 1, 100

; Power Saving

Default = {A1841308-3541-4FAB-BC81-F71556F20B4A}, 0, 100

Default = {A1841308-3541-4FAB-BC81-F71556F20B4A}, 1, 100



[NVMePowerSetting3]

; Disk subgroup

Subgroup = {0012ee47-9041-4b5d-9b77-535fba8b1442}

; Secondary NVMe Power State Transition Latency Tolerance (ms)

Setting =  {DBC9E238-6DE9-49E3-92CD-8C2B4946B472}, %NVMePowerLatencyToleranceName2%, %NVMePowerLatencyToleranceDesc2%,,0x00000001

; Range 0 to 1 minute (unit: ms)

ValueRange = 0, 60000, 1, %Milliseconds%



; High Performance

Default = {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C}, 0, 0

Default = {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C}, 1, 0

; Balanced

Default = {381B4222-F694-41F0-9685-FF5BB260DF2E}, 0, 100

Default = {381B4222-F694-41F0-9685-FF5BB260DF2E}, 1, 100

; Power Saving

Default = {A1841308-3541-4FAB-BC81-F71556F20B4A}, 0, 200

Default = {A1841308-3541-4FAB-BC81-F71556F20B4A}, 1, 200



[NVMePowerSetting4]

; Disk subgroup

Subgroup = {0012ee47-9041-4b5d-9b77-535fba8b1442}

; Secondary NVMe Idle Timeout (ms)

Setting =  {D3D55EFD-C1FF-424E-9DC3-441BE7833010}, %NVMeIdleTimeoutName2%, %NVMeIdleTimeoutDesc2%,,0x00000001

; Range 0 to 1 minute (unit: ms)

ValueRange = 0, 60000, 1, %Milliseconds%



; High Performance

Default = {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C}, 0, 2000

Default = {8C5E7FDA-E8BF-4A96-9A85-A6E23A8C635C}, 1, 2000

; Balanced

Default = {381B4222-F694-41F0-9685-FF5BB260DF2E}, 0, 2000

Default = {381B4222-F694-41F0-9685-FF5BB260DF2E}, 1, 1000

; Power Saving

Default = {A1841308-3541-4FAB-BC81-F71556F20B4A}, 0, 1000

Default = {A1841308-3541-4FAB-BC81-F71556F20B4A}, 1, 1000



;********************************************************

[Strings]

;Localizable

DiskName                    = "Microsoft Standard NVM Express Driver"

MSFT                        = "Microsoft"

MS-NVME                     = "Standard NVM Express Controller"

PCI\CC_010802.DeviceDesc    = "Standard NVM Express Controller"

Milliseconds                = "milliseconds"

StorNVMe_ServiceDesc        = "Microsoft Standard NVM Express Driver"

NVMePowerLatencyToleranceName1 = "Primary NVMe Power State Transition Latency Tolerance"

NVMePowerLatencyToleranceDesc1 = "When the NVMe device has been idle for a certain amount of time, transition to the lowest non-operational power state whose ENLAT+EXLAT value is less than or equal to the value specified by this setting."

NVMeIdleTimeoutName1         = "Primary NVMe Idle Timeout"

NVMeIdleTimeoutDesc1         = "Specifies the amount of time the NVMe device must be idle before transitioning to the primary non-operational power state."

NVMePowerLatencyToleranceName2 = "Secondary NVMe Power State Transition Latency Tolerance"

NVMePowerLatencyToleranceDesc2 = "After the NVMe device has been in the primary non-operational power state for a certain amount of time, transition to the lowest non-operational power state whose ENLAT+EXLAT value is less than or equal to the value specified by this setting."

NVMeIdleTimeoutName2         = "Secondary NVMe Idle Timeout"

NVMeIdleTimeoutDesc2         = "Specifies the amount of time the NVMe device must be in the primary non-operational power state before transitioning to the secondary non-operational power state."



;*******************************************

;Non-localizable

SPSVCINST_ASSOCSERVICE = 0x00000002

SERVICE_KERNEL_DRIVER  = 1

SERVICE_BOOT_START     = 0

SERVICE_ERROR_NORMAL   = 1

SERVICE_ERROR_CRITICAL = 3

REG_EXPAND_SZ          = 0x00020000

REG_DWORD              = 0x00010001

REG_MULTI_SZ           = 0x00010000

REG_MULTI_SZ_APPEND    = 0x00010008

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.46