mdmpsion.inf Driver File Contents (3com-3c2000-t-gigabit-adapter_Win.zip)

ÿþ; Copyright (c) Microsoft Corporation.  All rights reserved.

;Manufacturer: Psion Dacom Gold Card/Gold Card Global V34 Modem PC Card.



[Version]

Signature="$WINDOWS NT$"

Class=Modem

ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}

Provider=%MSFT%

DriverVer = 06/21/2006,10.0.18362.1



[ControlFlags]

ExcludeFromSelect=*



[Manufacturer]

%Psion% = Psion,NTamd64

%IBM% = IBM,NTamd64



[Psion.NTamd64]

%Modem1%=Modem2,PCMCIA\Psion_Dacom-Gold_Card_Global_V.34_PC_Card-B56B

%Modem1%=Modem2,PCMCIA\Psion_Dacom-Gold_Card_Global_V.34_PC_Card-016C-0000

%Modem1%=Modem2,PCMCIA\Psion_Dacom-Gold_Card_Global_V.34_PC_Card-D2CB

%Modem1%=Modem2,PCMCIA\Psion_Dacom-Gold_Card_Global_V.34_PC_Card-016C-0002

%Modem2%=Modem2,PCMCIA\Psion_Dacom-Gold_Card_PCMCIA_Modem-3C8F

%Modem2%=Modem2,PCMCIA\Psion_Dacom-Gold_Card_PCMCIA_Modem-016C-0000

%Modem5%=Modem4,PCMCIA\Psion_Dacom-Gold_Card_Global_56K+Fax-35F1

%Modem5%=Modem4,PCMCIA\Psion_Dacom-Gold_Card_Global_56K+Fax-016C-0005

%Modem5%=Modem4,PCMCIA\Psion_Dacom-Gold_Card_Global_56K+Fax-2D19

%Modem5%=Modem4,PCMCIA\Psion_Dacom-Gold_Card_Global_56K+Fax-2E29

%Modem5%=Modem4,PCMCIA\Psion_Dacom-Gold_Card_Global_56K+Fax-481B

%Modem5%=Modem4,PCMCIA\Psion_Dacom-Gold_Card_Global_56K+Fax-5670

%Modem5%=Modem4,PCMCIA\Psion_Dacom-Gold_Card_Global_56K+Fax-016C-0001

%Modem5%=Modem4,PCMCIA\Psion_Dacom-Gold_Card_Global_56K+Fax-016C-0004

%Modem6%=Modem6,PCMCIA\PSION-GOLD_CARD_56K_COMBINE_IT-8E6D

%Modem6%=Modem6,PCMCIA\PSION-GOLD_CARD_56K_COMBINE_IT-016C-0006



[IBM.NTamd64]

%Modem3%=Modem3,PCMCIA\IBM_INTERNATIONAL-PC_CARD_MODEM_WITH_GSM-8469

%Modem3%=Modem3,PCMCIA\IBM_INTERNATIONAL-PC_CARD_MODEM_WITH_GSM-02B7

%Modem4%=Modem4,PCMCIA\IBM_INTERNATIONAL-PC_CARD_MODEM_WITH_GSM-7E6C

%Modem4%=Modem4,PCMCIA\IBM_INTERNATIONAL-PC_CARD_MODEM_WITH_GSM-016C-0C05



[Modem6]

DriverVer=11/22/2000, 5.00.2403.0

Include=mdmgl010.inf

AddReg=New_All, PCMCIA, Modem6.AddReg, V250_Settings, MDMGL010.ALL, MDMGL010.V34SHORT,MDMGL010.V90SHORT



[Modem4]

DriverVer=06/01/1999,5.00.0000.0

Include=Mdmgl010.inf 

AddReg=All, Modem4.AddReg, Mdmgl010.All, Mdmgl010.V34Short, Mdmgl010.V90Short



[Modem3]

DriverVer=06/01/1999,5.00.0000.0

Include=Mdmgl010.inf 

AddReg=All, Modem3.AddReg, Mdmgl010.All, Mdmgl010.V34Short, Mdmgl010.V90Short



[Modem2]

DriverVer=06/01/1999,5.00.0000.0

Include=Mdmgl010.inf 

AddReg=All, Modem2.AddReg, Mdmgl010.All, Mdmgl010.V34Short, Mdmgl010.V90Short



[Modem4.AddReg]

HKR,, Properties, 1, 80,01,00,00, FF,00,00,00, FF,00,00,00, 07,00,00,00, 0F,00,00,00, FF,03,00,00, 00,C2,01,00, C0,DA,00,00

HKR,,PcmciaExclusiveIrq,0x00010001,1



[Modem3.AddReg]

HKR,, Properties, 1, 80,01,00,00, FF,00,00,00, FF,00,00,00, 07,00,00,00, 0F,00,00,00, F7,03,00,00, 00,C2,01,00, 60,EA,00,00



[Modem2.AddReg]

HKR,, Properties, 1, 80,01,00,00, FF,00,00,00, FF,00,00,00, 07,00,00,00, 0F,00,00,00, FF,03,00,00, 00,C2,01,00, 40,83,00,00

HKR, Settings, ErrorControl_Off,, "\N0"

HKR, Settings, ErrorControl_On,, "\N3"

HKR, Settings, ErrorControl_Forced,, "\N2"

HKR, Settings, ErrorControl_Cellular,, "\N3"

HKR, Settings, ErrorControl_Cellular_Forced,, "\N2"



[Modem6.AddReg]

HKR,, Properties, 1, 80,01,00,00, FF,00,00,00, FF,00,00,00, 04,00,00,00, 0F,00,00,00, 37,03,00,00, 00,C2,01,00, 00,F4,01,00

HKR, Init, 1,, "AT<cr>"

HKR, Init, 2,, "AT&FE0V1S0=0&C1&D2\V0S95=45+MR=0;+DR=0;+ER=0<cr>"

HKR, Monitor, 1,, "ATS0=0<cr>"                              

HKR, Monitor, 2,, "None"                                 

HKR, Hangup, 1,, "ATH<cr>"                               

HKR, Answer, 1,, "ATA<cr>"                               

HKR,, Reset,, "ATZ<cr>"                                  



[All]

HKR,, FriendlyDriver,,unimodem.vxd

HKR,, DevLoader,,*vcomm

HKR,, PortSubClass,1,02

HKR,, ConfigDialog,,modemui.dll

HKR,, EnumPropPages,,"modemui.dll,EnumPropPages"

HKR,, DCB, 1, 1C,00,00,00, 00,C2,01,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00

HKR,, PowerDelay,  0x10001, 1500

HKR,, ConfigDelay, 0x10001, 1500

HKR,, DeviceType, 1, 03      

HKR,, PortDriver,, "serial.vxd"

HKR,, Contention,, *vcd

HKR,, InactivityScale, 1, 0a,00,00,00

HKR,, InactivityFormat,, "seconds"

HKR, Init, 1,, "AT&F<cr>"

HKR, Init, 2,, "AT&FE0V1&D2&C1S0=0\VW2S95=1<cr>"

HKR, Monitor, 1,, "ATS0=0<cr>"

HKR, Monitor, 2,, "None"

HKR, Hangup,    1,, "ATH<cr>"

HKR, Answer,    1,, "ATA<cr>"

HKR,, Reset,, "AT&F<cr>"

HKR, Settings, Prefix,, "AT"

HKR, Settings, Terminator,, "<cr>"

HKR, Settings, DialPrefix,, "D"

HKR, Settings, DialSuffix,, ""

HKR, Settings, SpeakerVolume_Low,, "L0"

HKR, Settings, SpeakerVolume_Med,, "L2"

HKR, Settings, SpeakerVolume_High,, "L3"

HKR, Settings, SpeakerMode_Off,, "M0"

HKR, Settings, SpeakerMode_Dial,, "M1"

HKR, Settings, SpeakerMode_On,, "M2"

HKR, Settings, SpeakerMode_Setup,, "M3"

HKR, Settings, FlowControl_Off,, "&K0"

HKR, Settings, FlowControl_Hard,, "&K3"

HKR, Settings, FlowControl_Soft,, "&K4"

HKR, Settings, ErrorControl_Off,, "\N0-K0"

HKR, Settings, ErrorControl_On,, "\N3-K0"

HKR, Settings, ErrorControl_Forced,, "\N2-K0"

HKR, Settings, ErrorControl_Cellular,, "\N3-K1"

HKR, Settings, ErrorControl_Cellular_Forced,, "\N2-K1"

HKR, Settings, Compression_On,, "%%C3"

HKR, Settings, Compression_Off,, "%%C0"

HKR, Settings, Modulation_CCITT,, "B0"

HKR, Settings, Modulation_Bell,, "B1"

HKR, Settings, SpeedNegotiation_Off,, "N0"

HKR, Settings, SpeedNegotiation_On,, "N1"

HKR, Settings, Pulse,, "P"

HKR, Settings, Tone,, "T"

HKR, Settings, Blind_Off,, "X4"

HKR, Settings, Blind_On,, "X0"

HKR, Settings, CallSetupFailTimer,, "S7=<#>"

HKR, Settings, InactivityTimeout,, "S30=<#>"



[New_All]

HKR,, ConfigDialog,, modemui.dll

HKR,, DevLoader,, *vcomm

HKR,, EnumPropPages,, "modemui.dll,EnumPropPages"

HKR,, FriendlyDriver,, Unimodem.VXD

HKR,, PortSubClass, 1, 02

HKR,, InactivityScale, 1, 0a,00,00,00



[PCMCIA]

HKR,, PortDriver,, Serial.vxd

HKR,, Contention,, *vcd

HKR,, DeviceType, 1, 03



[V250_Settings]

HKR, Settings, Prefix,, "AT"

HKR, Settings, Pulse,, "P"

HKR, Settings, Tone,, "T"

HKR, Settings, DialPrefix,, "D"

HKR, Settings, DialSuffix,, ""

HKR, Settings, Terminator,, "<cr>"

HKR, Settings, CallSetupFailTimer,, "S7=<#>"          

HKR, Settings, InactivityTimeout,, "S30=<#>"          

HKR, Settings, Blind_Off,, "X4"                       

HKR, Settings, Blind_On,, "X3"                        

HKR, Settings, Compression_Off,, "+DS=0;"             

HKR, Settings, Compression_On,, "+DS=3;"              

HKR, Settings, SpeedNegotiation_Off,, "N0"

HKR, Settings, SpeedNegotiation_On,, "N1"

HKR, Settings, ErrorControl_Off,, "+ES=1,0,1;"           

HKR, Settings, ErrorControl_On,, "+ES=3,0,2;"            

HKR, Settings, ErrorControl_Forced,, "+ES=3,2,4;"        

HKR, Settings, FlowControl_Off,, "+IFC=0,0;"          

HKR, Settings, FlowControl_Hard,, "+IFC=2,2;"            

HKR, Settings, FlowControl_Soft,, "+IFC=1,1;"            

HKR, Settings, SpeakerVolume_Low,, "L1"                  

HKR, Settings, SpeakerVolume_Med,, "L2"                  

HKR, Settings, SpeakerVolume_High,, "L3"              

HKR, Settings, SpeakerMode_Off,, "M0"                 

HKR, Settings, SpeakerMode_Dial,, "M1"                

HKR, Settings, SpeakerMode_On,, "M2"                  

HKR, Settings, SpeakerMode_Setup,, "M3"                  





[Strings]

MSFT = "Microsoft"

Psion = "Psion Dacom Plc"

IBM = "IBM Corporation"

Modem1="Psion Dacom Gold Card Global V34 PC Card"

Modem2="Psion Dacom Gold Card V34 PC Card"

Modem3="IBM International Modem with GSM"

Modem4="IBM International Modem with GSM (V.90)"

Modem5="Psion Dacom Gold Card Global 56K+Fax (V.90)"

Modem6="Psion Gold Card Global 56K Combine iT"

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.72