mdmnis1u.inf Driver File Contents (3com-3c2000-t-gigabit-adapter_Win.zip)

ÿþ; Windows USB ISDN TA Setup File

; Copyright (c) 1999 Microsoft Corporation

; Manufacturer: NISSEI



[Version]

Signature=$WINDOWS NT$

Class=Modem

CLASSGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}

Provider=%MSFT%

DriverVer = 06/21/2006,10.0.18362.1



[DestinationDirs]

FakeModemCopyFileSection=12

DefaultDestDir = 12



[Manufacturer]

%USR%=Models,NTamd64



[ControlFlags]

ExcludeFromSelect=*



[Models.NTamd64]

%USR01% = Modem1, USB\VID_061E&PID_0001



[Modem1.NT]

Include = usbser.inf

Needs = UsbSerial_ModemFilter_Install

AddReg = All, MfgAddReg, Modem1.AddReg, EXTERNAL



[Modem1.NT.Services]

Include = usbser.inf

Needs = UsbSerial_ModemFilter_Install.Services



[Modem1.NT.HW]

Include = usbser.inf

Needs = UsbSerial_ModemFilter_Install.Hw



;**********************************************************

; Legacy usbser section

;**********************************************************

;

; WARNING: The following sections are legacy usbser sections

; retained for compatibility with INFs that Include/Needs

; the modem INF

;

; New INFs should Include/Needs usbser.inf like below

;

;

; [DDInstall]

; Include = usbser.inf

; Needs   = UsbSerial_Install or UsbSerial_ModemFilter_Install

; 

;

; [DDInstall.Hw]

; Include = usbser.inf

; Needs   = UsbSerial_Install.Hw or UsbSerial_ModemFilter_Install.Hw

; 

;

; [DDInstall.Services]

; Include = usbser.inf

; Needs   = UsbSerial_Install.Services or UsbSerial_ModemFilter_Install.Services

;



[LowerFilterAddReg]

HKR,,"LowerFilters",0x00010000,"usbser"



[LowerFilter_Service_Inst]

DisplayName=%USBFilterString%

ServiceType= 1

StartType  = 3

ErrorControl = 0

ServiceBinary = %12%\usbser.sys



[FakeModemCopyFileSection]

usbser.sys



[All]

HKR,,FriendlyDriver,,unimodem.vxd

HKR,,DevLoader,,*vcomm

HKR,,PortSubClass,1,02

HKR,,ConfigDialog,,modemui.dll

HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"

HKR, Init, 1,, "AT<cr>"

HKR, ISDN\SwitchType, SWITCH_INS64,, "AT<cr>"

HKR, ISDN\NvSave, 1,, "AT<cr>"

HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00

HKR, Responses, "<cr><lf>CONNECT<cr><lf>", 1, 02, 00, 00,00,00,00, 00,00,00,00

HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00

HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>", 1, 04, 00, 00,00,00,00, 00,00,00,00

HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00

HKR, Responses, "<cr><lf>BUSY<cr><lf>", 1, 06, 00, 00,00,00,00, 00,00,00,00

HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>", 1, 07, 00, 00,00,00,00, 00,00,00,00

HKR, Responses, "<cr><lf>RING<cr><lf>", 1, 08, 00, 00,00,00,00, 00,00,00,00

HKR, Responses, "<cr><lf>DELAYED<cr><lf>", 1, 1d, 00, 00,00,00,00, 00,00,00,00



[Modem1.AddReg]

HKR,, Properties, 1, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 30,00,00,00, 00,84,03,00, 00,f4,01,00

HKR,, DCB, 1, 1C,00,00,00, 00,84,03,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00



[Strings]

USBFilterString = "128DE-USB USB Modem Driver"

MSFT  = "Microsoft"

USR = "nissei"

USR01 = "nissei 128DE-USB - USB"



[EXTERNAL]

HKR,, DeviceType, 1, 01



[MfgAddReg]

HKR, Init, 2,,"AT&F<cr>"

HKR, Init, 3,,"ATE0S0=0V1&D2&C1<cr>"

HKR, Monitor, 1,,"ATS0=0<cr>"

HKR, Monitor, 2,,"None"

HKR, Hangup, 1,,"ATH<cr>"

HKR, Answer, 1,,"ATA<cr>"

HKR,, Reset,,"ATZ<cr>"

HKR, Settings,  Prefix,,"AT"

HKR, Settings,  Terminator,,"<cr>"

HKR, Settings,  DialPrefix,,"D"

HKR, Settings,  DialSuffix,,""

HKR, Settings,  FlowControl_Off,,"&K0"

HKR, Settings,  FlowControl_Hard,,"&K3"

HKR, Settings,  FlowControl_Soft,,"&K4"

HKR, Responses,"<cr><lf>CONNECT 9600<cr><lf>", 1,02,00, 80,25,00,00, 00,00,00,00

HKR, Responses,"<cr><lf>CONNECT 19200<cr><lf>", 1,02,00, 00,4b,00,00, 00,00,00,00

HKR, Responses,"<cr><lf>CONNECT 32000<cr><lf>", 1,02,00, 00,7d,00,00, 00,00,00,00

HKR, Responses,"<cr><lf>CONNECT 38400<cr><lf>", 1,02,00, 00,96,00,00, 00,00,00,00

HKR, Responses,"<cr><lf>CONNECT 57600<cr><lf>", 1,02,00, 00,e1,00,00, 00,00,00,00

HKR, Responses,"<cr><lf>CONNECT 64000<cr><lf>", 1,02,00, 00,fa,00,00, 00,00,00,00

HKR, Responses,"<cr><lf>CONNECT 115200<cr><lf>", 1,02,00, 00,c2,01,00, 00,00,00,00

HKR, Responses,"<cr><lf>CONNECT 230400<cr><lf>", 1,02,00, 00,84,03,00, 00,00,00,00

HKR, Protocol\ISDN\HDLC_PPP_64K,1,,"AT&Q1<cr>"

HKR, Protocol\ISDN\HDLC_PPP_128K,1,,"AT&Q2<cr>"

HKR, Protocol\ISDN\V110_9DOT6K,1,,"AT&Q0$S1<cr>"

HKR, Protocol\ISDN\V110_19DOT2K,1,,"AT&Q0$S2<cr>"

HKR, Protocol\ISDN\V110_38DOT4K,1,,"AT&Q0$S3<cr>"

HKR, Protocol\ISDN\V110_57DOT6K,1,,"AT&Q0$S4<cr>"

HKR, Protocol\ISDN\PIAFS_OUTGOING,1,,"AT&Q3<cr>"

HKR, Protocol\ISDN\PIAFS_INCOMING,1,,"AT&Q3<cr>"

HKR, Protocol\ISDN\AUTO_1CH,1,,"AT&Q1<cr>"

HKR, Protocol\ISDN\AUTO_2CH,1,,"AT&Q2<cr>"

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 2.70