ASIO/EASI/WDM drivers for DiO 2448 release notes: 1. If you're using EASI/ASIO with a midi/audio sequencer be sure to disable the GM-Softwaresynth since it blocks the ASIO/EASI output stream. In Cubase this is done in the MME device setup controlpanel (setupmme.exe), in Logic Audio you have to edit the win.ini entry: [Logic] . . MidiOut_Microsoft_GS_Wavetable_SW_Synth=0 <- this entry has to be set to 0 2. All special settings of the DiO 2448 are accessible via the mixer panels advanced settings buttons. If these buttons do not appear in your mixer, you have to enable them in the options menu of the Volume controlpanel (by selecting 'Advanced Controls'). 3. Some S/PDIF devices supply an inverted signal. this will cause distorted output of the S/PDIF in monitor. In this case you have to select 'Invert SPDIF in' in Advanced Settings of the S/PDIF in line of the recording controlpanel. 4. S/PDIF I/O is by default set to 44.1kHz, 16 bit. 48kHz and 24 bit I/O can be selected in Advanced Settings of the Volume Control line. 5. Monitoring of S/PDIF in via analog out is by default enabled. To disable use the Advanced Settings of the Wave Monitor line.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.