;---------------------------------------------------------------- ; ; AdpU160m.INF -- This is a preliminary INF that installs support ; for the Adaptec PCI SCSI devices under Windows7 ; ; Copyright (c) 2010 Adaptec Incorporated ; ;---------------------------------------------------------------- ;---------------------------------------------------------------- ; ; [Version] ; ; Class and ClassGUID are defined in devguid.h ; ;---------------------------------------------------------------- [Version] signature="$Windows NT$" Class=SCSIAdapter ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318} Provider=%INF_PROVIDER% CatalogFile=adpu160m.cat DriverVer=01/07/2010,7.5.645.100 ;---------------------------------------------------------------- ; ; [SourceDisksNames] ; ; diskid = description[,[tagfile][,<unused>,subdir]] ; ;---------------------------------------------------------------- [SourceDisksNames] 1 = %FLOPPY_DESCRIPTION%,,, ;---------------------------------------------------------------- ; ; [SourceDisksFiles.x86] ; ; filename_on_source = diskid[,[subdir][,size]] ; ;---------------------------------------------------------------- [SourceDisksFiles] adpu160m.sys= 1,,,,,,,, ;---------------------------------------------------------------- ; ; [Manufactuerer] ; ; manufacturer-name ; %strkey%=models-section-name ; [%strkey%=models-section-name] ... ; ;---------------------------------------------------------------- ; Table of Contents [Manufacturer] %ADP%= ADAPTEC,NTx86,NTamd64 ;---------------------------------------------------------------- ; ; [ControlFlags] ; ;---------------------------------------------------------------- [ControlFlags] ; ; Exclude the following PnP devices from Select Device list. ; ExcludeFromSelect = * ;---------------------------------------------------------------- ; ; Models ; ; device-description=install-section-name,hw-id[,compatible-id...] ; ; "*" indicates that device is supported by more than one ; enumerator. ; ;---------------------------------------------------------------- [ADAPTEC] [ADAPTEC.NTx86] %PCI\VEN_9005&DEV_00CF.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_00CF %PCI\VEN_9005&DEV_00C0.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_00C0 %PCI\VEN_9005&DEV_008F.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_008F %PCI\VEN_9005&DEV_0080.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_0080 %PCI\VEN_9005&DEV_0081.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_0081 %PCI\VEN_9005&DEV_00C0&SUBSYS_F6209005.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_00C0&SUBSYS_F6209005 %PCI\VEN_9005&DEV_00C0&SUBSYS_F6200E11.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_00C0&SUBSYS_F6200E11 %PCI\VEN_9005&DEV_0080&SUBSYS_E2A09005.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_0080&SUBSYS_E2A09005 %PCI\VEN_9005&DEV_0080&SUBSYS_E2A00E11.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_0080&SUBSYS_E2A00E11 %PCI\VEN_9005&DEV_0080&SUBSYS_62A09005.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_0080&SUBSYS_62A09005 %PCI\VEN_9005&DEV_0080&SUBSYS_E2209005.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_0080&SUBSYS_E2209005 %PCI\VEN_9005&DEV_0081&SUBSYS_62A19005.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_0081&SUBSYS_62A19005 %PCI\VEN_9005&DEV_0082&SUBSYS_02109005.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_0082&SUBSYS_02109005 [ADAPTEC.NTamd64] %PCI\VEN_9005&DEV_00CF.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_00CF %PCI\VEN_9005&DEV_00C0.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_00C0 %PCI\VEN_9005&DEV_008F.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_008F %PCI\VEN_9005&DEV_0080.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_0080 %PCI\VEN_9005&DEV_0081.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_0081 %PCI\VEN_9005&DEV_00C0&SUBSYS_F6209005.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_00C0&SUBSYS_F6209005 %PCI\VEN_9005&DEV_00C0&SUBSYS_F6200E11.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_00C0&SUBSYS_F6200E11 %PCI\VEN_9005&DEV_0080&SUBSYS_E2A09005.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_0080&SUBSYS_E2A09005 %PCI\VEN_9005&DEV_0080&SUBSYS_E2A00E11.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_0080&SUBSYS_E2A00E11 %PCI\VEN_9005&DEV_0080&SUBSYS_62A09005.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_0080&SUBSYS_62A09005 %PCI\VEN_9005&DEV_0080&SUBSYS_E2209005.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_0080&SUBSYS_E2209005 %PCI\VEN_9005&DEV_0081&SUBSYS_62A19005.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_0081&SUBSYS_62A19005 %PCI\VEN_9005&DEV_0082&SUBSYS_02109005.DeviceDesc% = adpu160m_Inst, PCI\VEN_9005&DEV_0082&SUBSYS_02109005 ;---------------------------------------------------------------- ; ; Install ; ;---------------------------------------------------------------- [adpu160m_Inst.NT] CopyFiles=@adpu160m.sys ;---------------------------------------------------------------- ; ; Services ; ; Flag = 0x1 (SPSVCINST_TAGTOFRONT) ; Make sure that device loads at ; the front of its group ; ;---------------------------------------------------------------- [adpu160m_Inst.NT.Services] AddService = adpu160m,0x2,adpu160m_Service_Inst,Miniport_EventLog_Inst [adpu160m_Service_Inst] ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 0 ; SERVICE_BOOT_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %12%\adpu160m.sys LoadOrderGroup = SCSI Miniport AddReg = pnpsafe_pci_addreg [pnpsafe_pci_addreg] HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001 ;[num_of_requests] HKLM,"SYSTEM\CurrentControlSet\Services\adpu160m\Parameters\Device","NumberOfRequests",0x10001,255 ;---------------------------------------------------------------- ; ; Event Log Install ; ;The NT EventLog entries are the same for all SCSI miniports. ; ;---------------------------------------------------------------- [Miniport_EventLog_Inst] AddReg = Miniport_EventLog_AddReg [Miniport_EventLog_AddReg] HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll" HKR,,TypesSupported,0x00010001,7 ;---------------------------------------------------------------- ; ; [DestinationDirs] ; ; file-list-section=dirid[,subdir]] ... ; ;---------------------------------------------------------------- [DestinationDirs] DefaultDestDir = 12 ; DIRID_DRIVERS (this is IOSubsys on ; Win95, and System32\Drivers on NT) ;---------------------------------------------------------------- ; ; [Strings] ; ;---------------------------------------------------------------- [Strings] INF_PROVIDER="Adaptec" ADP="Adaptec" FLOPPY_DESCRIPTION="Adaptec Ultra160 Windows FMS4.0 SP5" ;************************** ; Adaptec Ultra160 SCSI Controllers ; ; PCI\VEN_9005&DEV_00C0.DeviceDesc = "Adaptec SCSI Card 39160 - Ultra160 SCSI (Generic)" ;VM - PCI\VEN_9005&DEV_00CF.DeviceDesc = "Adaptec AIC-7899 Ultra160 PCI SCSI Card" ;VM - PCI\VEN_9005&DEV_008F.DeviceDesc = "Adaptec AIC-7892 Ultra160 PCI SCSI Card" PCI\VEN_9005&DEV_0080.DeviceDesc = "Adaptec SCSI Card 29160 - Ultra160 SCSI (Generic)" PCI\VEN_9005&DEV_0081.DeviceDesc = "Adaptec SCSI Card 19160 - Ultra160 SCSI (Generic)" PCI\VEN_9005&DEV_00C0&SUBSYS_F6209005.DeviceDesc = "Adaptec SCSI Card 39160 - Ultra160 SCSI" PCI\VEN_9005&DEV_00C0&SUBSYS_F6200E11.DeviceDesc = "Compaq 64-bit/66MHz Dual Channel Wide Ultra3 SCSI Adapter" PCI\VEN_9005&DEV_0080&SUBSYS_E2A09005.DeviceDesc = "Adaptec SCSI Card 29160 - Ultra160 SCSI" PCI\VEN_9005&DEV_0080&SUBSYS_E2A00E11.DeviceDesc = "Compaq 64-bit/66MHz Wide Ultra3 SCSI Adapter" PCI\VEN_9005&DEV_0080&SUBSYS_62A09005.DeviceDesc = "Adaptec SCSI Card 29160N - Ultra160 SCSI" PCI\VEN_9005&DEV_0080&SUBSYS_E2209005.DeviceDesc = "Adaptec SCSI Card 29160LP - Ultra160 SCSI" PCI\VEN_9005&DEV_0081&SUBSYS_62A19005.DeviceDesc = "Adaptec SCSI Card 19160 - Ultra160 SCSI" PCI\VEN_9005&DEV_0082&SUBSYS_02109005.DeviceDesc = "Adaptec 2915/2930LP PCI SCSI Controller" ;************************** ; Adaptec Ultra160 ASIC's ; PCI\VEN_9005&DEV_008F.DeviceDesc = "Adaptec AIC-7892 - Ultra160 SCSI" PCI\VEN_9005&DEV_00CF.DeviceDesc = "Adaptec AIC-7899 - Ultra160 SCSI"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.