eng.txt Driver File Contents (DCP-T500W-inst-B1-AP.EXE)

WS01000010,Wireless Device Setup Wizard
WS01000040,2.00
WS02010010,Welcome
WS02010020,Welcome to the Wireless Setup Wizard
WS04000010,IP Address Configuration
WS04000020,Configure the IP address of the Wireless Device
WS04000030,Obtain an IP address automatically.
WS04000050,Set Static IP address
WS04000060,IP Address
WS04000070,Subnet mask
WS04000080,Gateway
WS05020010,Wireless Network Name
WS05020020,Configure the wireless network name that the device will be associated with.
WS05020030,Name(SSID)
WS05020040,This is an Ad-hoc network and there is no access point.
WS05020060,Channel
WS05030010,Searching for Wireless Networks...
WS05040010,Available Wireless Networks
WS05040020,Choose the SSID that you checked in advance.
WS05040040,Name (SSID)
WS05040050,Channel
WS05040060,Wireless Mode
WS05040070,Signal
WS05040080,Access Point / Base Station
WS05040090,Ad-hoc Network
WS05040100,If the SSID (Identification of your Wireless Access Point) does not appear in this list, or if you are hiding it, you may still be able to configure it by clicking the 'Advanced' button.
WS05040110,802.11b/g (11Mbps/54Mbps)
WS05040120,802.11b (11Mbps)
WS05040130,802.11g (54Mbps)
WS05040140,802.11b/g/n
WS05040150,802.11n
WS05060010,ATTENTION!
WS05060020,This Wireless Network is not secure. It is not using secure authentication and encryption.
WS05060030,Do you want to continue setup?
WS05060040,Name (SSID) :
WS06000010,Authentication Method and Encryption Mode
WS06000020,Configure the Authentication Method and Encryption Mode
WS06000030,Authentication Method
WS06000040,Encryption Mode
WS06000050,Network Key
WS06000070,Name (SSID) :
WS06000080,Inner Authentication Method
WS07000010,Wireless Network Settings Confirmation
WS07000020,Click "Next" to submit following settings to the device
WS07000060,Communication mode
WS07000070,Infrastructure
WS07000080,Ad-hoc
WS07000090,Name (SSID)
WS07000150,Auto
WS07000190,IP Address
WS07000200,Subnet mask
WS07000210,Gateway
WS07000220,Channel
WS07000230,Authentication Method
WS07000240,Encryption Mode
WS07000270,Change IP Address
WS07000280,Inner Authentication Method
WS08010010,Submitting settings ...... Please wait...
WS21000010,User Authentication
WS21000020,Configure the Authentication Method and Encryption mode
WS21000030,Name (SSID) :
WS21000040,User Authentication
WS21000050,User ID
WS21000060,User Password
WS43000000,Network Key Configuration
WS43000010,Please enter the network security key which you checked earlier.
WS43000020,Your wireless network Authentication and Encryption type will automatically be detected. You only need to enter the Network Key.
WS44000010,Certificate Configuration
WS44000020,Configure the Client Certificate and Server Certificate Verification.
WS44000030,Name (SSID) :
WS44000040,Client Certificate
WS44000050,Server Certificate Verification
WS44000051,No Verification
WS44000052,CA Cert.
WS44000053,CA Cert. + Server ID
WS44000060,Server ID
WS46000010,Failed to connect to the network
WS46000020,Confirm the following and then click Retry.
WS46000230,Your wireless access point/router cannot be detected.(TS-02)
WS46000240,Please try the following:
WS46000250,- Check that you are selecting the correct SSID (network name) and are entering the correct network key
WS46000260,- Check that your wireless access point/router is not using any additional security settings, such as MAC address filtering
WS46000270,- Try moving the device closer to your wireless access point/router.  Once connected to the network, you should be able to move it back to its previous location
WS46000330,The device cannot connect to your wireless access point/router.(TS-03)
WS46000340,- Check that you are selecting the correct SSID (network name) and are entering the correct network key
WS46000350,- If you do not know this information, please refer to the documentation from the manufacturer or supplier of your wireless access point/router
WS46000430,Unsupported authentication/encryption method has been detected on your wireless access point/router.(TS-04)
WS46000440,- Your wireless access point/router is using an authentication/encryption method that is not supported by the device. Check that you are selecting the correct SSID (network name)
WS46000530,The specified SSID and network key are incorrect.(TS-05)
WS46000540,-  Check that you are selecting the correct SSID (network name) and are entering the correct network key
WS46000630,The specified wireless security information is incorrect.(TS-06)
WS46000640,- Check the authentication/encryption method that you are selecting and make sure you are entering the correct network key
WS50000010,Installation confirmation
WS50000020,During installation the wireless settings on your computer or wireless access point will automatically be detected.Before connecting the wireless device to a corporate network please confirm with the network administrator.
WS50000030,Checked and confirmed
WS51000010,Detecting existing wireless network settings on your Computer
WS51000020,The wireless network settings of your computer or wireless access point have been detected.
WS51000030,The wireless network name detected (Wireless Access Point/Router name):
WS51000040,SSID:
WS51000050,Would you like to connect to the wireless network using these settings?
WS51000060,Yes
WS51000070,No
WS98050010,Invalid Network Key
WS98050020,(ASCII WEP Key)
WS98050030,You did not correctly enter the WEP key information.
WS98050040,64(40) bit WEP   : "Hello"
WS98050050,128(104) bit WEP : "Wirelesscomms"
WS98050060,Enter 5 or 13 text characters. For example:
WS98060010,Invalid Network Key
WS98060020,(Hex. WEP Key)
WS98060030,You did not correctly enter the WEP key information.
WS98060040,Enter 10 or 26 digits of hexadecimal data. For example:
WS98060050,64(40) bit WEP   : "71f2234aba"
WS98060060,128(104) bit WEP : "71f2234ab56cd709e5412aa3ba"
WS98070010,Exit Setup
WS98070020,Setup is not complete.
WS98070030,If you quit this setup program the Wireless Device is not configured.
WS98070040,To continue this setup program, click "Resume"
WS98070050,To quit this setup program, click "Exit".
WS98100010,Invalid Network Key
WS98100020,The Passphrase is an ASCII string of 8-63 characters.
WS98150010,Invalid Network Key
WS98150020,You did not correctly enter the network key.Enter 5 or 8-63 characters depending on your security method.
WS98150030,For more information see the Help text.
WS98160010,USB connection error
WS98160020,Please confirm that a USB cable is connected to your device.
WS98160030,Please confirm that your device is on.
WS99010010,OK
WS99010020,Cancel
WS99010030,Exit
WS99010040,< Back
WS99010050,Next >
WS99010060,Help
WS99010070,Refresh
WS99010090,Resume
WS99010100,Advanced
WS99010130,Where is my SSID?
WS99010140,Where is my network key?
WS99010150,Retry >
WS99020100,Open System
WS99020110,Shared Key
WS99020120,WPA / WPA2-PSK
WS99020160,LEAP
WS99020170,EAP-FAST
WS99020180,PEAP
WS99020190,EAP-TTLS
WS99020200,None
WS99020210,WEP
WS99020220,TKIP
WS99020230,AES
WS99020240,CKIP
WS99020500,EAP-TLS
WS99030100,NONE
WS99030110,GTC
WS99030120,MS-CHAPv2
WS99030130,CHAP
WS99030140,MS-CHAP
WS99030150,PAP
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.92