SocketScan Trigger Software for Windows CE V1.0 README.TXT file (c) Copyright 2004 Socket Communications, Inc. All Rights Reserved This README file contains important information regarding the SocketScan Trigger Software included on this CD. The instructions in this README are based upon the assumption that ActiveSync 3.1 or later has been installed on the host PC. You can download the latest ActiveSync software version to your host PC from Microsoft's web site at: http://www.microsoft.com/mobile/pocketpc/downloads/ NOTE: This file may not appear properly formatted in all text editors. Please use NotePad or WordPad if you experience any difficulties. ******************************************************************** README TABLE OF CONTENTS 1.0 INSTALLATION INSTRUCTIONS 2.0 PRODUCT DESCRIPTION & OPERATING INSTRUCTIONS 3.0 RELEASE NOTES 4.0 WINDOWS CE FILE LOCATIONS 5.0 UNINSTALL PROCEDURES 6.0 TECHNICAL SUPPORT INFORMATION ____________________________________________________________________ 1.0 INSTALLATION INSTRUCTIONS SocketScan Trigger Software is also available from Bar Code Scanner Downloads section of the Socket web site as a self-extracting zip file. The zip file contains this ReadMe File and the software installer. 2.0 PRODUCT DESCRIPTION & OPERATING INSTRUCTIONS This version of SocketScan Trigger Software v1.0 works with the Socket In-Hand Scan Card(ISC) family of products in all devices running on Windows CE v3.0 or higher as well as the Cordless Hand Scanner on Pocket PC 2003 (Windows Mobile) devices. 2.1 Operation of the Socket In-Hand Scan Cards is based on the SocketScan software shipped with all scanning products. In order to trigger the ISC, users typically must assign one of the buttons on their mobile device to the SocketScan application. Users occasionally find it inconvenient or even impossible to assign or use a physical button on the mobile device. This software provides a virtual trigger button that floats on top of the active application and can be used as an alternate method of triggering the In-Hand Scan Card. 2.2 When launched from the Programs page of your CE device, the floating trigger button appears on the screen on top of the active application. The Button may be dragged by the title bar to a convenient location on the screen. Tapping the Button will activate the laser in the ISC. NOTE: SocketScan must be active and the ISC, SDIO ISC or ISC-I must be inserted in the CF or PC Card slot for the Button to operate correctly. 2.3 A SocketScan Trigger icon appears on the task bar on the HPC or at the bottom of the Today screen on the Pocket PC. Tap this icon to open a pop-up menu with the following options: 2.3.1 Tap "Scan Now" to activate the scanner as if you had tapped the floating Button. 2.3.2 Tap "Remove Floating Trigger" to remove the Button from the screen but keep the icon handy on the task bar. Tapping the icon, then "Launch Floating Button" adds the button back on the screen. 2.3.3 Tap "Close SocketScan Trigger" to close the application completely. From this state, the SocketScan trigger can only be launched from the Programs page. 3.0 RELEASE NOTES 3.1 The Palm-size PC v2.01 (the first versions of Windows CE devices) and early Pocket PC and HPC v2.11 are not supported. Though SocketScan Trigger may install on one of these devices, it is not guaranteed to work. 3.2 The application SocketScan Trigger is not compatible with SocketScan "Scan Demo" application. 3.3 The application icon on the "Recent apps" toolbar in the Start Menu on Pocket PC devices is the same as the icon for the SocketScan software. 4.0 WINDOWS CE FILE LOCATION This application consists of two files which are copied into the following directory: \Windows ScktTrig.exe Socket SocketScan Trigger.unload 5.0 UNINSTALL PROCEDURES Microsoft ActiveSync offers several options for uninstalling applications on your Windows CE device (e.g. Pocket PC, HPC 2000) Option 1 To uninstall directly on your Pocket PC using the Remove Program: a) Please remove the Socket In-Hand Scan Card from your mobile device and close the SocketScan Trigger software. Failure to do this will prevent completion of the uninstall process. b) Tap on the START menu. c) Tap on SETTINGS. d) Tap on the SYSTEM tab or CONTROL PANEL. e) Double or single tap on the REMOVE PROGRAMS icon. f) Tap on (select) the line that says "Socket SocketScan Trigger". g) Tap on REMOVE. h) Tap on YES to confirm removal of the program. --OR-- Option 2 To uninstall software on your mobile device while connected to your Host PC, follow these steps on the Host PC: a) Please remove the Socket scanning product from your mobile device and close the SocketScan Trigger software. Failure to do this will prevent completion of the uninstall process. b) Establish a connection and partnership (either serial or Ethernet) with your Host PC. c) Open Microsoft ActiveSync. d) Select TOOLS, ADD/REMOVE PROGRAMS... e) Highlight "Socket SocketScan Trigger". f) Click REMOVE. g) Select OK to confirm removal of the software on your mobile device. h) Click NO in the next dialog box to prevent the software from being removed from your host PC. Regardless of which of these two methods you use to uninstall the SocketScan software, you will be able to re-install the software on your Windows CE device by simply going back into the Microsoft ActiveSync, TOOLS, ADD/REMOVE PROGRAMS window, then checking the box for "Socket SocketScan Trigger", then clicking OK. --OR- Option 3 To completely uninstall the software from both your mobile device and your Host PC: a) Please remove the In-Hand Scan Card from your mobile device and close the SocketScan software. Failure to do this will prevent completion of the uninstall process. b) Establish a connection and partnership (either serial or Ethernet) with your Host PC. c) Open Microsoft ActiveSync. d) Select TOOLS, ADD/REMOVE PROGRAMS... e) Highlight "Socket SocketScan Trigger" f) Click REMOVE g) Select OK to confirm removal of the software on your mobile device. h) Click YES in the next dialog to confirm removing the software from your Host PC. i) Click OK twice to close each respective dialog box or window. This process will permanently remove the SocketScan Trigger software from both your Windows CE device and your Host PC and will require you to re-install the software from the Installation software originally downloaded from the Socket web site. 6.0 TECHNICAL SUPPORT INFORMATION You can contact SOCKET COMMUNICATIONS at: Socket Communications 37400 Central Court Newark, CA 94560 You can track new product releases, software updates and technical bulletins by visiting Socket's web page at www.socketcom.com If you have technical questions, first register your product, then e-mail the technical support department at:"support@socketcom.com". You may also wish to try Socket's new Socket On-Demand Support(SOS) system located at: http://www.socketcom.com/support/. PLEASE NOTE: You must have registered your product in order to obtain technical support You are also welcome to call Socket's main line at (510) 744-2700 or FAX (510) 744-2727.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.