1. UE202B.zip Driver
2. WINME.TXT File Contents

WINME.TXT Driver File Contents (UE202B.zip)

How to install the Compex LinkPort/UE202-B USB to Fast Ethernet Adapter
for Microsoft Windows Millennium Edition (ME)
====================================================================

System Requirements

     Software (supports the following operating systems):

        o Microsoft Windows Millennium Edition

     Hardware:

        o Minimum configuration: Pentium 200 MHz, 32 MB RAM
        o Compex LinkPort/UE202-B USB to Fast Ethernet Adapter
       

 This installation procedure assumes you already have MS Windows Me
 installed in your computers.

Note:-  Different MS Windows OS environment and TCP/IP Addressing:
        If you have other PCs installed with MS Windows 95 and
        you want to network with MS Windows Me, please refer to the
        document WIN95.TXT for more details.

Running the network with TCP/IP network protocol
------------------------------------------------
  When installing a new network at home we recommend using this private
  IP address range, 192.168.168.xxx   where xxx is a number from 1 to 254
  Each notebook or PC must be assigned a unique IP address.
  The first machine will use IP address 192.168.168.1
  The second machine will use IP address 192.168.168.2 and so on.
  During the installation you will be prompt to enter a IP address.
  Enter the address for each machine installed.


 Installation on Windows Me
 ==========================
  NOTE: During the installation process, some files might need to
        be copied from the Windows Me CD. Please have it ready in the CDROM
        drive.

   1. If you notebook or PC is already up and running Windows, simply insert 
      the Compex LinkPort/UE202-B adapter into the USB port. 
   2. As LinkPort/UE202-B adapter is plug and play, Windows will auto-detect
      the adapter and display below and prompt for the driver. 

             " USB 10/100 LAN"  

      Insert the Compex LinkPort/UE202-B driver disk in drive A.
   3. The Add New Hareware Wizard screen display the following:

         What would you like to do ?
         _/ - Automatic search for a better driver (Recommended)
         o - Specific the location on the drive (Advanced)

       Recommended to use the first option. To continue click 'Next' button.
    4. Windows Me will automatically select Compex LinkPort/UE202-B adapter
       driver from the floppy disk as the best driver to install.
    5. When completed Windows will prompt to reboot.
       Click YES to reboot.

  * Note:- At this point if you want to make changes to the TCP/IP
           configuration, you should answer NO and proceed to section
           "Configuring TCP/IP"
           Here you add the IP address for the machine as explained above.

           If you have click YES do not worry. Let the machine restart and
           continue to  "Configuring TCP/IP"


   Configuring TCP/IP
   ------------------

   1. Click the START on the bottom left conner. From the menu, click SETTINGS
      then Control Panel. In Control Panel, double-click on the Network icon.
      If you have problem following this refer to Windows manual for details.

      By default, Windows Me install only the following;

          o-   Client for Microsoft Network
          o-   Compex LinkPort/UE202-B USB to Fast Ethernet Adapter
          o-   TCPIP

      Double-click on the TCPIP item in the box. The TCPIP properties page
      will display.
      Click on the IP Address tab.
      Enter the following for the first machine:
         IP Address  : 192.168.168.100
         Subnet Mask : 255.255.255.0

      Enter 192.168.168.2 for the next machime and so on.
      You can normally the Default Gateway box blank if you do not have
      a network server or router (like internet access router).
      
      Click OK to return to the Network box.
      From here you can chose to enable sharing of your machine resources like
      hard disk and printer. Continue to Enabling Sharing if you want to share
      otherwise, click OK to save the configurations and Windows will
      prompt to restart the machine.
      Click YES.
      When machine restarted, the network adapter is ready to service the
      network.

    Enabling Sharing
    ----------------
      If you plan to share this machine hard disk and/or printer click on the
      option File and Print Sharing button once. The configuration box will
      be immediately updated and the option will be added to the box.
      Click OK and Windows will prompt to restart the machine.
      Click YES to restart.
      When machine restarted, the network adapter is ready to service the
      network.

      Please details the Windows manual on how to share the hard disk and
      printer.