This driver supports Linux kernel with version above v2.4.0.
* Note: Make sure that your kernel is version above 2.4.0.
Otherwise, upgrade your kernel first before install.
The procedure to activate ue202b on linux is as follows:
step 1: compile:
gcc -DMODULE -D__KERNEL__ -c ue202b.c -I%DIR%/include
note: %DIR% is the directory of the kernel source code which is accompanied with
the current kernel of your system. Normally it is located in /usr/src/linux.
step 2: insert the driver as module:
insmod ue202b.o
(run 'lsmod' to see if the module is inserted)
step 3: bind your card to an IP address:
/sbin/ifconfig eth0 ${IPADDR} netmask ${NETMASK} broadcast ${BROADCAST}
(run 'netstat -i' to see if there is a interface 'eth0')
step 4: add your card to IP routing table and add gateway:
/sbin/route add default gw ${GATEWAY} dev eth0
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.