readme.txt Driver File Contents (lan.zip)


Broadcom Corporation 440x 10/100 Integrated Controller DOS/OS2 NDIS2 driver.

CUSTOM KEYWORDS in driver in protocol.ini:

BUSNUM 
DEVNUM
FUNCNUM or PORTNUM

The first two keywords are used concurrently and have been included for 
manufacturing purposes.  Do not use them unless you are familiar with PCI
device configuration.
These two keywords are needed if multiple NetXtreme boards are on a system 
and (a) specific NetXtreme adapter/s need to be loaded in specific order.
BUSNUM specifies the PCI bus number and DEVNUM specifies the device
number given to the board when configured by the PCI BIOS.
A PCI device scan utility is needed to find this info.
The values are in decimal.

Example of the use of these key words in the protocol.ini:
		
[B44]
    DriverName = "B44$"
    BusNum = 3
    DevNum = 14
    PortNum = 2

To add more adapter(up to 4) repeat the below entry, where n can be from 1 to 3.

[B44_n]
    DriverName = "B44$"
    BusNum =
    DevNum =

Example of using addition entries to load more than one adapter in the protocol.ini:

[B44]
    DriverName = "B44$"
    BusNum = 3
    DevNum = 10

[B44_1]
    DriverName = "B44$"
    BusNum = 3
    DevNum = 11

[B44_2]
    DriverName = "B44$"
    BusNum = 3
    DevNum = 12

[B44_3]
    DriverName = "B44$"
    BusNum = 3
    DevNum = 13
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.70