DVD-302S Firmware Update Procedure 1. Connect the DVD-302S to to the SCSI bus. Set the ID for 2. Verify that the bus is correctly terminated. 2. Make a bootable diskette and include the following files: ANSI.SYS (whose version corresponds to the Operating System used). MSCDEX.EXE (whose version corresponds to the OS used). DOS APSI driver for you SCSI controller. DRD60ASP.SYS (Pioneer DOS ASPI driver, file date 11-04-96). UPDVDS2.EXE (file date 01-06-98). V106.HEX (file date 06-03-98) 3. Make sure that the DOS driver DRD60ASP.SYS.SYS and the ANSI driver ANSI.SYS is loaded via CONFIG.SYS. NOTE load the ASPI driver for your SCSI controller prior to loading DRD60ASP.SYS ex. DEVICE=A:\ANSI.SYS DEVICE=A:\DRD60ASP.SYS /D:MSCD001 4. In AUTOEXEC.BAT, make sure that MSCDEX is called. ex. A:\MSCDEX.EXE /D:MSCD001 5. Boot the computer using this diskette. DO NOT ATTEMPT TO RE-PROGRAM THE DRIVE FROM A DOS WINDOW. 6. After the computer completes the boot sequence, issue the following command at the DOS prompt: A:\>UPDVDS2 /2 V106.HEX 7. DO NOT ABORT THE PROGRAM OR POWER CYCLE THE SYSTEM UNTIL THE PROGRAM SUCCESSFULLY COMPLETES.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.