1. E200_202.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (E200_202.exe)

Banyan VINES
-------------

 The ISA Ethernet Card NDIS 2.01 driver may be configured to run in the Banyan 
 VINES environment (for client-based systems only). Follow the steps listed 
 below:


1       On your local hard drive to create a sub-directory.
         For example C:\BANYAN
        Copy the installation relative files to this sub-directory.

        The relative files are list as "File required" session of this text
        file.

2       Create the "PROTOCOL.INI", "CONFIG.SYS", and "AUTOEXEC.BAT" files
        (sample files are shown below).

        * Modify the "PROTOCOL.INI" file to reflect the changes necessary for
          the appropriate LAN card section.

        * Modify the "AUTOEXEC.BAT" and "CONFIG.SYS" files to reflect changes.

3       Run the VINES PCCONFIG Utility to configure the NDIS driver

4       Reboot the machine and run the "AUTOEXEC.BAT" file.

5       Run BAN.

        The installation of the ISA Ethernet Card NDIS 2.01 driver for Banyan 
        VINES is now complete.


Files Required

BAN.EXE 32835 02-12-92 6:07p

BAN.MSB 2058 02-12-92 6:07p

REDIR.MSB 982 02-12-92 6:07p

NEWREV.EXE 47933 02-12-92 6:07p

NEWREV.MSB 5139 02-12-92 6:07p

PCCONFIG.DB 19656 02-12-92 6:07p

REDIRALL.EXE 51546 02-12-92 6:07p

PCCONFIG.EXE 61155 02-12-92 6:07p

PCCONFIG.MSB 5785 02-12-92 6:07p

NDISBAN.COM 35356 02-12-92 6:07p

NETBIND.EXE 15639 02-12-92 6:07p

NDISBAN.DOC 3072 02-12-92 6:07p

NDISBAN.OVL 15639 02-12-92 6:07p

PROTMAN.DOS 10649 02-12-92 6:07p


User Must Find

E200ND.DOS


The following path should be used to access the driver from the ISA Ethernet 
Card NDIS 2.01 driver diskette:

        A:\NDIS.DOS\

The modifications to the "CONFIG.SYS", "AUTOEXEC.BAT", and "PROTOCOL.INI"
files are shown below as an example for ISA Ethernet Cards.

CONFIG.SYS

FILES=20
BUFFERS=20
DEVICE=C:\BANYAN\PROTMAN.DOS  /I:C\BANYAN
DEVICE=C:\BANYAN\E200ND.DOS

AUTOEXEC.BAT

PATH=C:\DOS
PROMPT $P$G
C:
CD\BANYAN
BAN

PROTOCOL.INI

[PROTOCOL MANAGER]
        DRIVENAME= PROTMAN$

[E200ND_NIF]
        DRIVENAME = E200ND$
        
[VINES_XIF]
        DRIVENAME = NDISBAN.DOS$
        BINDINGS = E200ND_NIF

----------------------------------[ END ]----------------------------------


How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.