***************************************
* *
* EZSET.EXE V2.11 *
* *
***************************************
ISA Ethernet Card Configuration and Diagnostics file
----------------------------------------------------
To configure your ISA Ethernet Card, execute the configuration file,EZSET.
A screen menu will guide you to configure the ISA Ethernet Card to fit your
compyter system's environment.
The following is the configuration parameters.
I/O Address : 240h,280h,2c0h,300h,320h,340h,360h
IRQ Line : 2(9),3,4,5,10,11,12,15
BOOT ROM Address : C8000h,CC000h,D0000h,D4000h,D8000h,DC000h
Data Width : 8 bits or 16 bits; auto sensing by hardware
Before you install the drivers and connect the ISA Ethernet Card to the network,
make sure to run the diagnostics to assure the proper function of the ISA
Ethernet Card. The diagnostics includes two groups of test :
1. Card initialization and loopback test
This test performs the function of verifying the components, connectors,
and circuitry.
2. Network test
This test performs the data transmission and reception of the adapter.
A screen menu provides you with the instructions to conduct this test.
------------------------------------[END]---------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.