**************************** * Turtle Beach AudioTron * * Firmware * * Release Notes * * www.TurtleBeach.com * * (c) 2000-2004, VTB * **************************** !!!!!!WARNING!!!!!!! - DO NOT UPDATE YOUR FIRMWARE WHILE "DISABLE NETWORK CONFIG FROM FRONT PANEL" IS CHECKED! PLEASE MAKE SURE THAT THIS OPTION IS *NOT* CHECKED BEFORE UPDATING FIRMWARE! NOTE: This version may reset your unit to factory defaults. Please insure you have written any information down for entry after the flash update is completed. --------------------------------------- To install the new version, 1) Download and unzip the file. 2) Place atron****.nb0 and ath****.nb0 in the audio directory of your share. (where **** is the version number of the new firmware.) 3) Power Off the AudioTron from the power switch on the rear of the unit. 4) Wait several seconds, and Power On the unit from the rear panel, then press the front power button and allow the AT to search for your files. 5) Push the options button on the front of the AT. 6) Select "UPDATE FLASH" and press the knob. 7) After the update process is complete, Power off the AudioTron from the power switch on the rear of the unit 8) Wait several seconds, and Power On the unit. --------------------------------------- Note that if you're using a TOC file for the share to which you unzip the new .nb0 file, the AT will not find the new firmware. Either move the new firmware to a share without a TOC, or temporarily rename the TOC file. Also, if you have a file named nk.nb0 in your firmware folder already, you'll need to delete or rename it. --------------------------------------- If you need to flash back to a previous version, rename the previous firmware nk.nb0 (that's zero).Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.