Netware Client32 Driver
Introduction:
-------------
This document describes the procedure to install the NetWare Client32
driver for AOpen AON-201 10M PCI Ethernet Adapter.
Location of Driver: \CLIENT32\AON201.LAN
Sample Configuration Files:
---------------------------
STARTNET.BAT (Client 32 for DOS will contain):
SET NWLANGUAGE=English
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\AON201.LAN FRAME=ETHERNET_802.2
LOAD C:\NOVELL\CLIENT32\AON201.LAN FRAME=ETHERNET_802.3
LOAD C:\NOVELL\CLIENT32\AON201.LAN FRAME=ETHERNET_II
LOAD C:\NOVELL\CLIENT32\AON201.LAN FRAME=ETHERNET_SNAP
A. Driver Installation Procedures on Clien32 for DOS :
------------------------------------------------------
1.If you have completed installing the Netware Client 32 for DOS, all
you have to do is to modify STARTNET.BAT. Please see the sample
STARTNET.BAT above. If not, follow the next step 2 - step 7.
2.Run INSTALL.EXE from Netware Client 32 for DOS diskette 1 (or from
Netware 4.11 CD). When the product manual appears, mark the
"Netware Client 32 for DOS" item, then press <Enter>.
3.Select "OTHER DRIVERS" item from "32-bit Network Board Drivers" menu,
then press <Enter>.
4.Insert Driver Diskette, then specify the driver path
like A:\CLIENT32
5.Select "AOpen AON-201 10M PCI Ethernet Adapter Driver", then press
<Enter>.
6.Follow instructions to complete the Client32 for DOS software
installation.
7.Reboot your machine.
Installation Notes:
-------------------
* Installing Multiple LAN Adapters:
The keyword "SLOT" is provided for multiple LAN adapters in a
single server by the driver AON201.LAN. So, add "SLOT" in LOAD
commands. For example:
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD LSLC32.NLM
LOAD CMSM.NLM
LOAD ETHERTSM.NLM
LOAD AON201 FRAME=Ethernet_802.2 SLOT=1 ;adapter #.1
LOAD AON201 FRAME=Ethernet_802.2 SLOT=2 ;adapter #.2
B. Driver Installation Procedures on Client32 for Windows 3.x :
---------------------------------------------------------------
Refer to Content A. On step 2, mark "Netware Client 32 for DOS" and
"Client 32 for Windows". On step 4, specify the driver path like
A:\CLIENT32\AON201.LAN, then follow step 3..7 to complete the
installation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.