Legal / Disclaimers =================== Copyright (C) 2017, Intel Corporation. All rights reserved. Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make any commitment to update the information contained herein. Intel is a trademark of Intel Corporation in the U.S. and/or other countries. * Other product and corporate names may be trademarks of other companies and are used only for explanation and to the owners' benefit, without intent to infringe. Main Legacy PXE ROM version in this build: v0.1.13 Main UEFI LAN driver version in this build: v0.0.18 ---Contents of UEFI LAN driver archive--- E0018X7.EFI Contains "UEFI LAN driver" only ---Contents of Legacy PXE ROM archive--- BA0113BC.LOM Contains "basic code" only BA0113L2.LOM Contains "basic code + Setup + undi driver" BA0113Q2.LOM Contains "Setup + undi driver" BA0113X2.LOM Contains "undi driver" only --------- Subdirectories --------- \DOS Contains ibabuild for DOS Devices.txt A list of PCI device ID's supported in this release of the gigabit version of the Intel(R) Boot Agent. XDevices.txt A list of PCI device ID's supported in this release of the 10 gigabit version of the Intel(R) Boot Agent. Readme.txt A user guide to share how to create Legacy PXE ROM via ibabuild easily --------- How to create Legacy PXE Rom --------- 1. Put three files which you got from IBABUILD folder on DOS boot flash. 2. Find a system and boot to DOS with IBABUILD tool. 3. Create Legacy PXE Rom on DOS. 4. Command: IBABUILD -OF=LOM -IMAGE=SETUP,UNDI,BC -DEVID=xxxx. 5. You will get a .LOM file; please provide it to your BIOS and ask them to integrate it in to BIOS.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.