; ; Rl100ATX NDIS Driver INF File. ; [Identification] OptionType = NetAdapter [PlatformsSupported] PCI [Options] RL100N35 [BurstChoices] Burst_1 = "1 dword", 256 Burst_2 = "2 dwords", 512 Burst_3 = "4 dwords", 1024 Burst_4 = "8 dwords", 2048 Burst_5 = "16 dwords", 4096 Burst_6 = "32 dwords", 8192 [CacheChoices] Cache_1 = "8 dwords", 1 Cache_2 = "16 dwords", 2 Cache_3 = "32 dwords", 3 [ThresholdChoices] Threshold_0 = "full packet", 0 Threshold_1 = "16 bytes", 1 Threshold_2 = "80 bytes", 5 Threshold_3 = "96 bytes", 6 Threshold_4 = "128 bytes", 8 Threshold_5 = "256 bytes", 16 Threshold_6 = "512 bytes", 32 Threshold_7 = "1024 bytes", 64 [SpeedChoices] Speed_0 = "AutoDetect", 0 Speed_1 = "10M", 1 Speed_2 = "100M", 2 [FullChoices] Full_0 = "AutoDetect", 0 Full_1 = "Disable", 1 Full_2 = "Enable", 2 [FileConstants] UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "Compex Inc" ProductMajorVersion = "3" ProductMinorVersion = "51" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "rl100n35" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\rl100n35.sys" NetRuleSoftwareType = "rl100n35Sys ndisDriver rl100n35Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """rl100n35Sys"" yes no container" NetRuleSoftwareClass = {"rl100n35Driver basic"} NetRuleSoftwareBindable = {"rl100n35Driver rl100n35Adapter non exclusive 100"} ProductHardwareName = "rl100n35" NetRuleHardwareType = "rl100n35 rl100n35Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"rl100n35Adapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" ;86-4-21 add, for get OS version. ProductVerSubKeyName = "Windows NT" OSManufacturer = "Microsoft" ProductVerKeyName = $(!NTN_SoftwareBase)"\"$(OSManufacturer)"\"$(ProductVerSubKeyName)"\CurrentVersion" CacheList = ^(CacheChoices, 1) CacheAlignValue = ^(CacheChoices, 2) BurstList = ^(BurstChoices, 1) BurstLenValue = ^(BurstChoices, 2) ThresholdList = ^(ThresholdChoices, 1) ThresholdValue = ^(ThresholdChoices, 2) SpeedList = ^(SpeedChoices, 1) LineSpeedValue = ^(SpeedChoices, 2) FullList = ^(FullChoices, 1) FullDuplexValue = ^(FullChoices, 2) [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + set ActivateDetection = FALSE Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set CommonStatus = STATUS_REBOOT set ActivateDetection = TRUE set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the RL100A PCI driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE set ActivateDetection = TRUE endif Debug-Output "OEMNADN2.INF: ==================================================" Debug-Output "OEMNADN2.INF: STF_CWDIR is: "$(!STF_CWDIR) Debug-Output "OEMNADN2.INF: STF_LANGUAGE is: "$(!STF_LANGUAGE) Debug-Output "OEMNADN2.INF: Option is: "$(Option) Debug-Output "OEMNADN2.INF: !STF_NCDETECT is: "$(!STF_NCDETECT) Debug-Output "OEMNADN2.INF: !STF_NCOPTION is: "$(!STF_NCOPTION) Debug-Output "OEMNADN2.INF: !STF_NCDETCARD is: "$(!STF_NCDETCARD) Debug-Output "OEMNADN2.INF: !STF_NCDETINFO is: "$(!STF_NCDETINFO) Debug-Output "OEMNADN2.INF: ==================================================" Set DetectedCard = FALSE Ifstr(i) $(ActivateDetection) != TRUE Goto skipdetection Endif set BurstLen = *($(BurstList), 6) set CacheAlign = *($(CacheList), 3) set Threshold = *($(ThresholdList), 1) set LineSpeed = *($(SpeedList), 1) set FullDuplex = *($(FullList), 1) set SelectedID = "" skipdetection =+ set from = $(fatal) set to = $(fatal) goto $(StartLabel) installadapter = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" set CommonStatus = STATUS_USERCANCEL goto end endif set OldVersionExisted = $(TRUE) endif endif CloseRegKey $(KeyProduct) Ifstr(i) $(DetectedCard) != TRUE Goto adaptersetup Endif StartWait Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD) EndWait Ifstr(i) $($R0) != STATUS_SUCCESSFUL Goto adaptersetup Endif Set DetectedParams = $($R1) Debug-Output "OEMNADN2.INF: Calling Param_SetDefaults to merge detected params" ; Shell $(ParamInf) Param_SetDefaults $(DetectedParams) goto adapteroptions configureadapter = + Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) ; set initial value for every keyword from Configuration Registry Database. set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "BurstLen" set BurstValue = $(ValueData) else-Ifstr(i) $(ValueName) == "CacheAlign" set CacheValue = $(ValueData) else-Ifstr(i) $(ValueName) == "LineSpeed" set SpeedValue = $(ValueData) else-Ifstr(i) $(ValueName) == "Threshold" set ThresValue = $(ValueData) else-Ifstr(i) $(ValueName) == "FullDuplex" set FullValue = $(ValueData) else-Ifstr(i) $(ValueName) == "SelectedID" set SelectedID = $(ValueData) else-Ifstr(i) $(ValueName) == "BusType" ;keep for 2CPUs set BusInterfaceType = $(ValueData) endif EndForListDo set CacheAlign = *($(CacheList), ~($(CacheAlignValue),+ $(CacheValue))) set BurstLen = *($(BurstList), ~($(BurstLenValue),+ $(BurstValue))) set Threshold = *($(ThresholdList), ~($(ThresholdValue),+ $(ThresValue))) set LineSpeed = *($(SpeedList), ~($(LineSpeedValue),+ $(SpeedValue))) set FullDuplex = *($(FullList), ~($(FullDuplexValue),+ $(FullValue))) adaptersetup =+ Shell $(ParamInf) Param_ParameterConfidence Ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "OEMNADE2.INF: parameter confidence too low to bypass configuration" Goto adapteroptions Endif Ifstr(i) $(DetectedCard) == TRUE Ifstr(i) $(!STF_INSTALL_MODE) != CUSTOM Goto adapterverify Endif Endif goto adapteroptions adapteroptions = + set from = adapteroptions set BusInterfaceType = 5 ;keep for 2CPU, 5->PCI read-syms FileDependentDlg$(!STF_LANGUAGE) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set BurstLen = $(Combo1Out) set CacheAlign = $(Combo2Out) set Threshold = $(Combo3Out) ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL Debug-Output "Action: exit. Bye." ui pop 1 goto end else ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif read-syms CustomMessageDlg$(!STF_LANGUAGE) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set LineSpeed = $(Combo4Out) set FullDuplex = $(Combo5Out) ui pop 1 else-ifstr(i) $(DLGEVENT) == "EXIT" ui pop 1 else ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif read-syms CustomMessageDlg2$(!STF_LANGUAGE) ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set SelectedID = $(EditTextOut) ui pop 1 else-ifstr(i) $(DLGEVENT) == "EXIT" ui pop 1 else ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif adapterverify =+ Ifstr(i) $(DetectedCard) != TRUE Goto skipoptions Endif Debug-Output "OEMNADN2.INF: Calling Param_VerifyCard" Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD) Ifstr(i) $($R0) == STATUS_SUCCESSFUL Debug-Output "OEMNADN2.INF: Param_VerifyCard succeeded" Goto skipoptions Endif Set from = adapteroptions Set to = skipoptions Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto Warning skipoptions =+ ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif endif Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters writeparameters = + set BurstValue = *($(BurstLenValue), ~($(BurstList),+ $(BurstLen))) set CacheValue = *($(CacheAlignValue), ~($(CacheList),+ $(CacheAlign))) set ThresValue = *($(ThresholdValue), ~($(ThresholdList),+ $(Threshold))) set SpeedValue = *($(LineSpeedValue), ~($(SpeedList),+ $(LineSpeed))) set FullValue = *($(FullDuplexValue), ~($(FullList),+ $(FullDuplex))) set NewValueList = {{SelectedID,$(NoTitle),$(!REG_VT_SZ),$(SelectedID)},+ {BurstLen,$(NoTitle),$(!REG_VT_DWORD),$(BurstValue)},+ {CacheAlign,$(NoTitle),$(!REG_VT_DWORD),$(CacheValue)},+ {LineSpeed,$(NoTitle),$(!REG_VT_DWORD),$(SpeedValue)},+ {Threshold,$(NoTitle),$(!REG_VT_DWORD),$(ThresValue)},+ {FullDuplex,$(NoTitle),$(!REG_VT_DWORD),$(FullValue)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1}} Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters) endif CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif EndWait goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end UpgradeSoftware = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) else goto fatalregistry endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fataldetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) Goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif ifstr(i) $(DoConfig) == "YES" endif Exit [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers exit [Source Media Descriptions] 1 = "Compex RL100ATX/10Base PCI Fast Ethernet Adapter Drivers Disk" [Signature] FileType = MICROSOFT_FILE [GetSignature] read-syms Signature return $(FileType) [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 1, oemsetup.inf, SIZE=31931, RENAME=$(!UG_Filename) [Files-rl100n35] 1,rl100n35.SYS , SIZE=26642 [LanguagesSupported] ENG [OptionsTextENG] rl100n35 = "Compex RL100ATX/10Base PCI Fast Ethernet Adapter" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" FunctionTitle = "Compex RL100ATX/10Base PCI Fast Ethernet Adapter Setup" ProductSoftwareDescription = "Compex RL100ATX/10Base PCI Fast Ethernet Adapter Driver" ProductHardwarerl100n35Description = "Compex RL100ATX/10Base PCI Fast Ethernet Adapter" ProductSoftwareTitle = "Compex RL100ATX/10Base PCI Fast Ethernet Adapter Driver" ProductHardwarerl100n35Title = "Compex RL100ATX/10Base PCI Fast Ethernet Adapter" ShellCodeErrorTitle = "Error: "$(FunctionTitle) ShellCodeErrorText = "Shell Code Error." [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG] Combo1Label = "&Burst Length:" Combo2Label = "&Cache Alignment:" Combo3Label = "&Transmit Threshold:" DlgType = "RadioCombination" DlgTemplate = "WD" Caption = $(FunctionTitle) Combo1List = $(BurstList) Combo1Out = $(BurstLen) Combo2List = $(CacheList) Combo2Out = $(CacheAlign) Combo3List = $(ThresholdList) Combo3Out = $(Threshold) ComboListItemsIn = {Combo1List, Combo2List, Combo3List} ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out} CBOptionsGreyed = {} NotifyFields = {NO, NO, NO} EditTextIn = "" EditTextLim = "" HelpContext = $(!IDH_DB_OEMNADWD_INS) [CustomMessageDlgENG] Label1 = "&Line Speed:" Label2 = "&FullDuplex Function:" DlgType = "RadioCombination" DlgTemplate = "NE2000" Caption = $(FunctionTitle) Combo4List = $(SpeedList) Combo4Out = $(LineSpeed) Combo5List = $(FullList) Combo5Out = $(FullDuplex) ComboListItemsIn = {Combo4List, Combo5List} ComboListItemsOut = {Combo4Out, Combo5Out} EditTextIn = "" EditTextLim = "" CBOptionsGreyed = {} NotifyFields = {NO, NO} HelpContext = $(!IDH_DB_OEMNADN2_INS) [CustomMessageDlg2ENG] Caption = "Input Ethernet ID" DlgText = "Please input the Ethernet ID to select an RL100ATX adapter."$(!LF)+ "For example:"$(!LF)+ " Ethernet ID: 008048d60000"$(!LF)$(!LF)+ "(Select Ignore if you want the driver to work on auto-detect "+ "the RL100ATX adapter.)" Edit1Label = "&Ethernet ID:" Continue = "&OK" Exit = "&Ignore" Help = "&Help" DlgType = "Edit" DlgTemplate = "QUERY_COMPUTER_NAME" EditTextLim = 12 EditTextIn = $(SelectedID) EditFocus = "ALL"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.