MDP7800-U / MDP7800V-U / MDP7800SP-U PCI Modem ============================================== Section A: Important notice Section B: Installation of PCI modem drivers on Windows 95 OSR1 platform Section C: Installation of PCI modem drivers on Windows 95 OSR2 platform Section D: Installation of PCI modem drivers on Windows 98 platform Section E: Installation of PCI modem drivers on Windows NT platform Section F: Installation of Trio DataFax Voice and other applications Section G: How to install Microsoft Fax in Windows 98 Section H: How to change the buzzer volume for Dial-Up Networking, Phone Dialer and Hyperterminal Section I: How to change the modem Country Profile Section J: Technical Support ------------------------------------------------------------------------------------------------- Section A: Important notice ================ 1. The PCI modem can be set up on Windows 95 OSR1, Windows 95 OSR2, Windows 98 or Windows NT but no support on WIN3.x platform. 2. For MDP7800-U, speaker phone is not supported but it can be used as answering machine. 3. For MDP7800-U modem, though the 'Dialer...' button for speakerphone function in Trio DataFax Voice is enabled. However, it is not supported by this modem. 4. For information how to use the AT command set, please refer to file Atcomset.doc in the root directory of the installation CD. You can also find it under Windows directory of your hard drive after installation of modem drivers. ------------------------------------------------------------------------------------------------- Section B: Installation of PCI modem drivers on Windows 95 OSR1 platform ============================================================== 1. Win95 will automatically detect the PCI PnP Modem and displays the 'New Hardware Found' dialog box. 2. Insert the installation CD provided into the CD-ROM drive. 3. Select the 'Driver from disk provided by Hardware manufacturer' option and click 'OK'. 4. Type D:\Win9x\ in the combo box and click 'OK'. You might encounter some resource conflicts after loading the PnP modem device (especially when there are non-Plug & Play adaptors installed in your system). To alter the resource configurations, go to Control Panel - System - Device Manager and click on 'Modems'. Choose the modem device and click on 'Properties'. You can change the settings to resolve the device conflict. For further details, please refer to Trouble-shooting section in Windows 95. Uninstalation ============= Run 'Uninstall MDP7800' inside 'MDP7800 Modem Information' program group. ------------------------------------------------------------------------------------------------- Section C: Installation of PCI modem drivers on Windows 95 OSR2 platform ============================================================== 1. Win95 will automatically detect the PCI PnP Modem after which the system will prompt the 'Update Device Driver Wizard' dialog box. 2. Insert the installation CD provided into the CD-ROM drive. 3. Click 'Next' to let system search for an updated driver. 4. Click 'Finish' to use the found driver. 5. Click 'Ok' when prompted to insert the installation disk. 6. Change path to D:\ and click 'OK'. 7. System will then automatically load all the necessary drivers and files needed. You might encounter some resource conflicts after loading the PnP modem device (especially when there are non-Plug & Play adaptors installed in your system). To alter the resource configurations, go to Control Panel - System - Device Manager and click on 'Modems'. Choose the modem device and click on 'Properties'. You can change the settings to resolve the device conflict. For further details, please refer to Trouble-shooting section in Windows 95. Uninstalation ============= Run 'Uninstall MDP7800' inside 'MDP7800 Modem Information' program group. ------------------------------------------------------------------------------------------------- Section D: Installation of PCI modem drivers on Windows 98 platform ========================================================= Installation of modem drivers in Win98 is similar to Win95. 1. Windows 98 will automatically detect the PCI modem. Click 'Next' to continue. 2. Insert the installation CD provided into the CD-ROM Drive. 3. Select 'Search for the best drivers for your device. (Recommended)' and click 'Next' to continue. 4. Enable 'CD-Rom drive' selection and click 'Next' to continue. 5. Modem Driver will be found on the installation CD. Click 'Next' to continue. 6. Click 'Finish' to complete modem installation. 7. System will then automatically load all the necessary drivers and files needed. You might encounter some resource conflicts after loading the PnP modem device (especially when there are non-Plug & Play adaptors installed in your system). To alter the resource configurations, go to Control Panel - System - Device Manager and click on 'Modems'. Choose the modem device and click on 'Properties'. You can change the settings to resolve the device conflict. For further details, please refer to Trouble-shooting section in Windows 98. Uninstalation ============= Run 'Uninstall MDP7800' inside 'MDP7800 Modem Information' program group. ------------------------------------------------------------------------------------------------- Section E: Installation of PCI modem drivers on Windows NT platform ========================================================= 1. Run the setup.exe located at D:\Winnt\7800-u for MDP7800-U PCI Modem D:\Winnt\7800v-u for MDP7800V-U PCI Modem D:\Winnt\7800sp-u for MDP7800SP-U PCI Modem 2. Follow on screen instructions to finish the installation. Uninstallation ============== To uninstall PCI modem drivers, run setup.exe located at D:\Winnt\7800-u for MDP7800-U PCI Modem D:\Winnt\7800v-u for MDP7800V-U PCI Modem D:\Winnt\7800sp-u for MDP7800SP-U PCI Modem Follow the online instructions to finish the uninstallation. ------------------------------------------------------------------------------------------------- Section F: Installation of Trio DataFax Voice and other applications ========================================================= To install Trio DataFax Voice and other bundled applications , run Inst32.exe. Follow the online screen to proceed with installation. For further information of Trio DataFax Voice, please refer to Relnotes.txt under D:\Trio\TDFV53\ in the installation CD. ------------------------------------------------------------------------------------------------- Section G: How to install Microsoft Fax in Windows 98 ========================================== If you are staying in US, go to directory D:\Tools\oldwin95\message\us in Windows 98 installation CD. For other countries go to D:\Tools\oldwin95\message\intl 1. First run wms.exe under the directory to install Microsoft Messaging. 2. Next run awfax.exe under the same directory to install Microsoft Fax. For further information on Microsoft Messaging and Microsoft Fax, read wms-fax.txt under the same directory. ------------------------------------------------------------------------------------------------- Section H: How to change the buzzer volume =============================== Dial-Up Networking ================== 1. In the Dial-Up Networking folder, click on the icon for the connection whose properties you want to change. 2. On the file menu, click 'Properties'. 3. Click 'Configure'. 4. Adjust the Speaker volume slider bar to change to volume level desired. Phone Dialer ============ 1. In the Control Panel folder, double-click on 'Modems'. 2. Click 'Configure'. 3. Adjust the Speaker volume slider bar to change to volume level desired. Hyperterminal ============= 1. Key in ATL0 for low volume level. 2. Key in ATL2 for medium volume level. 3. Key in ATL3 for high volume level. 4. Key in ATM0 to mute the buzzer. ------------------------------------------------------------------------------------------------- Section I: How to change the modem country profile ======================================= For better modem performance, please set the country profile to the country where you are in. If the country profile is not already set to the country where you are in, please do the following : Windows 95 : Go to Control Panel. There is a country select utility called 'Modem Country Select'. Double click on it. Select the country where you are in and click 'OK'. Windows 98 : Go to Control Panel. Double click on 'Modems'. Highlight MDP7800 PCI modem. Click on 'Dialing Properties'. Select the country where you are in and click 'OK'. ------------------------------------------------------------------------------------------------- Section J: Technical Support ================= *********************************************************** * In case you encounter any problem with our products, * * please quote the following model(s) when calling our * * Technical Support : * * MDP7800 PCI Modem * *********************************************************** ------- The End ---------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.