Intel(R) Extreme Graphics Driver for Win2K&XP - WW -
VERSION : 6.14.10.3606
BUILD ID : IDG0PC1W
-- HOW TO CLEAN INSTALL
1.Unzip the package files.
2.Double click the SETUP.EXE to run install.
-- HOW TO OVER INSTALL
1.It is the same as clean install.
-- HOW TO SILENT INSTALL
1.Run SETUP -s
-- HOW TO UNATTENDED INSTALL
1. Run in silent mode.
SETUP -s
2. Forces a system reboot after the installation completes.
SETUP -s -b
3. Suppresses the display of the license agreement screen.
SETUP -s -nolic
-- HOW TO VERIFYING THE INSTALLATION OF THE SOFTWARE
1.Click on the "My Computer" icon, then click on the
"Control Panel" icon, and then click on the "System"
icon.
2.Select the "Hardware" tab and then click on the
"Device Manager..." button.
3.Select the "Display Adapters" icon. The Intel Graphics
Driver should be listed. If not, the driver is not
installed correctly. To check the version of the driver,
refer to the section below.
-- HOW TO IDENTIFYING THE SOFTWARE VERSION NUMBER
1.Click on the "My Computer" icon, then click on the
"Control Panel" icon, and then click on the "Display"
icon.
2.Select the "Settings" tab and then click on the
"Advanced" button.
3.Select the "Intel(R) Graphics Technology" tab. The
graphics driver version should be listed on this screen.
-- HOW TO UNINSTALLING THE SOFTWARE
NOTE: This procedure assumes the above installation process
was successful. This uninstallation procedure is specific
only to the version of the driver and installation files
included in this package.
1.Click on the "My Computer" icon, then click on the
"Control Panel" icon, and then click on the "Add-remove
Programs" icon.
2.Select on the "Intel Extreme Graphics Driver" tab and then
click on the "Remove" button.
3.Click on the "OK" button and then click on the "Yes"
button to reboot.
-- SPECIAL NOTES OR RESTRICTIONS/CAUTIONS:
To properly install the driver for Windows XP, the following steps must be taken.
This will be fixed in future drivers.
Procedure to correctly load drivers on Windows XP ( HaveDisk ):
1) Go to Device Manager and install drivers as is currently done
2) Wait for driver install to complete. DO NOT click Finish yet or reboot system yet.
3) Minimize the Device Manager window so that any hidden New Hardware Found windows are visible.
3) This New Hardware found windows should now be displayed on the Desktop ( or on top of the
Device Manager window). This may take a few seconds to show up.
4) Make sure to respond to each New Hardware prompt. Click on Automatic Install. DO NOT point to
any directory path for these drivers. Wait for completion before continuing. (In the event
that the new hardware prompt does not pop up, finish the driver installation and the new
hardware prompt should be seen on the subsequent re-boot.)
5) ALL New Hardware prompts must be completed before clicking Finish for install. The following
Found New Hardware prompt windows should be seen:
1) SoftBios
2) KCH
3) All installed AIM modules
Please be sure that you see New Hardware Found prompts. At a minimum, you should always see two
( SoftBios, KCH). If you do not see these, and click Finish to complete the install, subsequent
boot will be to VGA.
-- The history of modifications :
-- IDG0PC1W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel Extreme Graphics Driver 13.3 Production Version .
-- IDG0OC0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel Extreme Graphics Driver 13.3 Beta 1.4 Version .
2. Fixed issue: HA00390, xp_tpc, fullscreen avi playback after S4, display is blinking.
-- IDG0NC1W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel Extreme Graphics Driver 13.2 Production Version .
-- IDG0MC1W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel Extreme Graphics Driver 13.1.2 logo version.
2. Fix bug:blue screen appear during installation.
-- IDG0LC0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel Extreme Graphics Driver 13.2 Beta 1.4
2. Update Release for JH2, Canary
-- IDG0KC0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel Extreme Graphics Driver 13.2 Beta 1.2
-- IDG0JC1W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel Extreme Graphics Driver PV 13.1 logo driver.
2. Fix A1+ issue HA00907:full screen video playback has garbage/no display on crt after resume
from s3/s4.
-- IDG0JC0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel Extreme Graphics Driver 13.1 Beta Release Version 1.4
2. Fix Yuhina issue QA00520:vga3471,change large size of DPI(120 DPI)setting,some word will be
cut.
3. Fix B2D issue QA00548:vga3471 ,Install VGA driver fail.
-- IDG0IC0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel Extreme Graphics Driver 13.0 Production Version 1.0
2. Fix Pelican issue QA01214:vga3460,update vga driver but AIM ver. still show old driver ver.
3. Fix B2I issue HA00576:monitor device can be seen on Intel Graphics controller by hotkey
Ctrl Alt F12.
-- IDG0HC0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel Extreme Graphics Driver 13.0 Beta Release 1.5.
2. Fix B2I issue HA00149,WinXP Monitor detection fail when attached TV.
-- IDG0GC3W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel Extreme Graphics Driver 12.1 Production Version(WHQLed driver).
-- IDG0GC0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel Extreme Graphics Driver 12.1 Production Candidate 1.0
2. Fix Pelican issue:tibet#38200, No display after install VGA driver.
3. Fix Pelican issue:QA01113,WinXP/2kSP3, screen black during install vga driver.
4. Please use VBIOS 2882 and this driver to fix above two issues.
-- IDG0FC0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel?Extreme Graphics Driver 12.0.1 Production Version(Logo Driver).
2. Update Release for Generic model.
3. Fix issue:HA01041-ect, 2k, DVD playback on extended desktop mode will flash when switch to full screen
4. Fix issue:HA00993-ect, 2k, garbage display on primary device when playback video file on extended desktop
5. Fix issue:HA00949-ect, 2k, "out of range" message on crt when resume from s4
6. Fix issue:HA01050-ect, 2k, no display after toggle DVD playback
7. Fix issue:QA00896-ect, 2k, system bluescreen when pressing Ctrl+Alt+F11 hotkey.
8. Fix issue:QA01157-ect, xp, black display while playback DVD with 1400*1050
9. Fix issue:HA00948-ect, xp, garbage appear on top of the lcd screen after resume from backlight off while palyback mov in full screen
-- IDG0EC0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel?Extreme Graphics Driver 12.1 Beta Candidate 2.3
2. Update Release for Generic model.
--- IDG0DC0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel?Extreme Graphics Driver 12.0.1 Production Candidate 1.0
2. Update Release for Generic model.
3. Hotfix version of 12.0 Graphics Driver(Logo version target day 2003/02/08).
4. Fix issue:QA01157_B2M ,ect, xp, black display while playback DVD with 1400*1050
--- IDG0CC1W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel?Extreme Graphics Driver 12.0 Production Version(Logo Driver).
2. Update Release for Generic model.
3. Fix issue:
In the installination,there will have three pup-up Dialog "Found New Hardware Wizard "
1) Intel(R)Graphics Chipset(KCH)Driver
2)Intel(R)Graphics Platform(SoftBIOS)Driver
3)AIM 3.0 Part 01 Codec Driver CH-7009-A
--- IDG0BC0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel?Extreme Graphics Driver 12.0 Production Candidate 1.0.
2. Update Release for Generic model.
3. Fix Neats:HA00945-ect, 2k, hibernation indicator is flashing if expansion mode is disable.
--- IDG0AC0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel VGA driver 12.0 Beta Candidate 2.5.
2. Update Release for Generic model.
3. Fix Neats:QA00859-Win2K,WinXP,VGA Driver uninstall didnt clearly in contorl panel/Add Remove Program menu.
--- IDG09C0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel VGA driver 12.0 Beta Candidate 2.4.
2. Update Release for Generic model.
3. Fix Neats:HA00929-ect, 2k, blue screen after clean install VGA driver(IDG07C0W).
--- IDG08C0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel VGA driver 12.0 Beta Candidate 2.3.
2. Update Release for Generic model.
3. Fix Tibet#1085506-QuakeIII flashs at 1024x768 32bpp mode on MGML A1 environment.
--- IDG07C0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel VGA driver 12.0 Beta Candidate 2.2.
2. Update Release for Generic model.
3. Fix QA00798-Win2k, CPU usage is over 95% after installed VGA driver IDG06C0W.
--- IDG06C0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel VGA driver 12.0 Beta Candidate 2.1.
2. Update Release for Generic model.
--- IDG05C0W ------------------------------------------------------------------------------
DEFECT/FEATURE IMPLEMENTED:
1. Intel VGA driver 12.0 Beta Candidate 2.0.
2. Update Release for Generic model.
--- IDG04C0W ------------------------------------------------------------------------------
(Problem)
None.
(Reason)
1.PC 12.0 Beta Candidate 1.4.
(Solution)
None.
--- IDG03C0W ------------------------------------------------------------------------------
(Problem)
None.
(Reason)
1.PC 12.0 Beta Candidate 1.2.
(Solution)
None.
--- IDG02C0W ------------------------------------------------------------------------------
(Problem)
None.
(Reason)
1. PC 12.0 Beta Candidate 1.1.
2. Rename Build ID and release for Generic model used Montara GM/GML chip.
(Solution)
None.
--- IBG01C1W ------------------------------------------------------------------------------
(Problem)
None.
(Reason)
1. PV 11.0.2 WHQLed driver.
2. First Release for Generic model.
(Solution)
None.
======================== End of Letter =======================================
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.