[rt2860.bin] 2006_11_30 Initial version V0.1 which supports LED mode, power saving. 2006_12_06 V0.2 which fixs LED issue. 2006_12_13 V0.3 which support signal LED mode. 2006_??_?? V0.4 which fix led polarity, but driver skip this version 2007_01_03 V0.5 which modify BBP access architecture. 2007_03_02 V0.6 which fix bug when radio on/off 2007_05_04 V0.7 which fix command 0x31 after 0x30, 0x31 may not work. 2007_08_20 V0.8 which support carrier detection 2008_02_15 V0.9 which support WPS LED mode on GPIO pin0 2008_03_25 V0.9-2 which support power save has whether turn on or off LNA/PA/PE choice 2008_04_29 V0.10 which support LED mode 7 and 8 (WPS) 2008_06_24 V0.11 which fix LED behavior if turn on power Consumption 2008_07_16 V0.12 which fix LED behavior cause by open drain design (RT3090) 2008_11_13 V0.13 which provides Low power consumption solution(RT3090) 2008_12_15 V0.14 which read AUX_CTRL and restores AUX_CTRL 2009_01_05 V0.15 which return erro code when MCU in sleep mode and driver still issue cmd . 2009_01_15 V0.16 which fix LED slow blink for 3090F . 2009_02_04 V0.16 Final. which solves two issue : ICH9 dumy interrupt issue & fast blink issue. 2009_02_12 V0.17 which fixes 3090F Led blink double frequency issue / Fine tune slow blink 2009_02_16 V0.18 which fixes LED Slow Blink spark issue, 35xx for current leakage issue in radio off mode 2009_03_17 V0.19 which fixes LED mode 11 issue, patches 3592 0x30 cmd; add LED mode 12 and 13 2009_03_18 V0.19 which fixes PLL disable issue 2009_04_14 V0.20 which fixes LED Mode 10, 3592 Power Saving RF State 2009_05_25 V0.21 which supports all LED mode for AutoInstall, 0x56 MCU cmd for GPIO, Store&Restore the value of 0x1328 for PSM 2009_07_08 v0.22 which rollback of 0x1328 PA*EN/ LNA*EN on power saving for 3572 , other using original control (pwrmgnt.c) v0.23 (for BBP R/W failure issue) is not formal released 2009_09_04 v0.24 fixes TRSW_en setting bug on single antenna with PSM mode. 2009_09_05 v0.24B fixes TRSW for 3592 2009_10_08 v0.25 fixes led polarity bug, 3562 PSM, BT-CoExist 0x90 MCU Cmd, Auto-Install 2009_11_20 v0.26 fixed 3593 power saving scheme, power saving level for RT3090BC4 single crystal and modify ChipVerld definition [rt2870.bin] 2007_07_10 V0.4 Add WPS LED Mode & Site Survey LED Mode 2007_09_04 V0.5 Support carrier detection 2008_01_11 V0.6 Update LED Mode 2008_01_17 V0.7 Update LED Site Surbvey Mode for LED blinking time 2008_02_15 V0.8 Support WPS LED mode on GPIO pin0 2008_04_18 V0.9 Support LED mode 7 and 8 (WPS) 2008_06_18 V0.10 Support RT3070, antenna diversity, Slow LED blink 2008_06_23 V0.11 The ACT and RDYG LED are switched on RT3070 2008_07_17 V0.12 LED mode 9 2008_12_12 V0.13 LED mode 10 2009_02_17 V0.14 MCU Cmd 0x36, 0x51; Power sequence of RT3xxx modification 2009_03_17 V0.15 which fixes LED mode 11 issue, patches 3592 0x30 cmd; add LED mode 12 and 13 2009_03_18 V0.15 which fixes PLL disable issue 2009_04_14 V0.16 which fixes LED mode 10 issue 2009_05_25 V0.17 which supports all LED mode for AutoInstall, 0x56 MCU cmd for GPIO, Store&Restore the value of 0x1328 for PSM 2009_07_29 V0.19 For fixing BBP read/write fail issue. 2009_09_05 v0.20 fixes TRSW_en setting bug on single antenna with PSM mode. 2009_10_28 v0.21 fix led polarity bug issue, fix 3562 ping lost issue, BT Coexistence 0x90 command, and fix auto install function. 2009_11_11 V0.22 For fixing BT Hardkey makes GPIO0 floating issue.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.