1. rtl8811auwinxp7win81.zip Driver
  2. Release_RTWlanU.txt File Contents

Release_RTWlanU.txt Driver File Contents (rtl8811auwinxp7win81.zip)

/*****************************************************************************
 *	Copyright(c) 2014,  RealTeK Technology Inc. All Right Reserved.
 *  
 *	Realtek Wireless LAN USB Driver Release Note. 
 *	
 *	Description:	
 *					VVVV.U.DDDD.YYYY
 *					
 *					VVVV	-	Version			-->	1015
 *					U		-	Sub Version		-->	0
 *					DDDD	-	Data	10/19	-->	1019
 *					YYYY	-	Year	2007	-->	2007
 * 
 *****************************************************************************/


############################################################################
	Version:		
	1000.0.0224.2010
	
	Reason:			
	1. Formal Release
	
	
############################################################################
	Version:		
	1001.0.0224.2010
	
	Reason:			
	1. Fix 92CU uplink issue
	
	
############################################################################
	Version:		
	1002.0.0311.2010
	
	Reason:			
	1. Add VWifi feature
	2. Fix Adhoc unstable
	3. Improve throughput
############################################################################
	Version:		
	1003.0.0326.2010
	
	Reason:			
	1. Fix vwifi beacon issue.
	2. Add WHQL related feature.

	Version:		
	1003.1.0402.2010
	
	Reason:		
	1. Add HW WPS function.	

############################################################################
	Version:		
	1004.0.0507.2010
	
	Reason:			
	1. Improve performance with 8196B AP
	2. Support 2X2 NIC
	3. Prevent illegal TKIP packet length isue.	

############################################################################
	Version:		
	1005.0.0603.2010
	
	Reason:			
	1. Modify adapter halt process.
	2. Modify LED behavior.
	3. Improve connection quality with iPod
	
############################################################################
	Version:		
	1006.0.0614.2010
	
	Reason:			
	1. Improve connection quality with iPod.

############################################################################
	Version:		
	1007.0.0720.2010
	
	Reason:			
	1. BT3.0+HS support.

############################################################################
	Version:		
	1008.0.0806.2010
	
	Reason:			
	1. WPS external registrar configure AP function.
	2. Handle the case of unplugging USB flash disk when WLAN NIC is
	   operating.

############################################################################
	Version:		
	1009.0.0903.2010
	
	Reason:			
	1. Support CU selective suspend.
	2. Fix WPS error.
	3. Improve Rf initialzie sequence.
	
############################################################################
	Version:		
	1010.0.0917.2010
	
	Reason:			
	1. Improve CU selective suspend power save.
	2. Add some PID for customers.
	
############################################################################
	Version:		
	1011.0.1110.2010
	
	Reason:			
	1. Fine tune CU selective suspend sequence.
	2. Add some VID/PID for customers.
	3. Support 8188RU.
	4. Update Wifi direct support.
	5. Improve slim combo support. 
	6. Support B/G mode recognize by PID.
	
############################################################################
	Version:		
	1012.0.1231.2010
	
	Reason:
	1. Fix Wifi direct connect fail.
	2. Improve BT reliabiilty.
	3. Customized performance improvement.
	4. Support WPS button under selective suspend.
	5. Improve CPU utilization.
	6. Support customerize ability.

############################################################################	
	Version:		
	1013.0.0325.2011
	
	Reason:
	1. Support 8723U.
	2. Improve stack utilization.
	3. Improve quick unplug stability.
	4. Improve power save stability.	
	5. Add CCX V5 relative support.
	6. Update VID/PID table support to V50.
	7. Improve disable/unplug speed on some platform.
	8. Support WPS2.0.
	9. Fix WIN7 soft AP mode BSOD.
	
############################################################################	
	Version:		
	1014.0.0509.2011	
	
	Reason:
	1. Support 8192DU.
	2. Support Wake on WLAN for USB.
	3. Reduce memory utilization.
	4. Support more RealTek WLAN devices in the same platform.	
	5. Support customerize feature.
	6. Revise Wifi Direct.
	7. Revise OMNIPEAK support.
	8. Fix 92D connect ad-hoc BSOD.
	9. Improve Band/PHY switch stability for 92D.
	
############################################################################	
	Version:		
	1015.0.0712.2011	
	
	Reason:
	1. Improve XP Concurrent stability.
	2. Fix Soft AP Mode TKIP Link Fail.
	3. Improve WPS link stability with Broadcom AP.
	4. Fix Link Speed Display.	
	5. Revise 88RU middle range throughput.
	6. Revise BT ability for PCI.
	7. Improve memory utilization and throughput for multiple pairs.
	8. Support more customer ID.
	9. Revise for windows WLK1.6.
	10. Revise AMSDU receive path in driver version 1013/1014.
	11. Improve TP for B mode.
	12. Improve stability for CE_VAU in selective suspend mode.
	
	Version:		
	1015.1.0726.2011	
	
	Reason:
	1. Soft AP TKIP/WEP will be limited at G mode by inf.
	2. Revise some requiremet for customer.
	3. Revise selecitve suspend flow for RTK 92CU module.
	
	Version:		
	1015.2.0906.2011	
	
	Reason:
	1. Revise ADHOC LED blink method.
	2. Improve ping response time.
	3. Revise for 88RU.
	4. Add WPS customerize feature.
	5. Fix iperf test lower throughput.
	
	Version:
	1015.3.0921.2011
	
	Reason:
	1. Revise for wifi 11n logo.
	2. Revise link speed display when RSSI is very low.	
	
	Version:
	1015.4.1128.2011
	
	Reason:
	1. Fix WNDAP3200 IOT in HT40 mode.
	2. Fix WNDAP4500 IOT of poor TP due to packet collision.
	3. Revise LED and WPS behavior according to Customer's requirement.
	4. Revise different channel plan TX power adjustment mechanism for MCS8-15
	
	Version:
	1015.5.1223.2011
	1. Support customerize soft AP ability.
	2. Support extension AP function.
	3. Support customerize LED and wake on wlan behavior.
	
	Version:
	1015.6.0210.2012
	1. Fix Soft AP WPA mode link problem and improve long distance link.
	2. Improve link qquality fpr WPA2 mode.
	3. Improve throughput stability for wifi test.
	4. Improve stability when driver verifier is enabled.

	Version:
	1015.7.0702.2012
	1. Support TPLINK high power dongle with customerize feature.
	2. Revise throughput for previous version.

############################################################################	
	Version:		
	1016.0.0825.2011	
	
	Reason:
	1. Support WIN8 multi port modification.

############################################################################	
	Version:		
	1017.0.0825.2011	
	
	Reason:
	1. Support WIN8 multi port modification.	

############################################################################	
	Version:		
	1018.0.1202.2011	
	
	Reason:
	1. Support new wifi direct modification.	

############################################################################	
	Version:		
	1019.0.0615.2012	
	
	Reason:
	1. Support 88EU.	
	2. Support some customerize feature in 88E series.

	Version:		
	1019.1.0705.2012	
	
	Reason:
	1. Revise IOT issue for TPLINK.

	Version:		
	1019.2.0914.2012	
	
	Reason:
	1. Fix 20/40M throughput unstable issue with correct RF-BW setting.

	Version:		
	1019.3.1019.2012	
	
	Reason:
	1. Support external registry for tx power dynamic mechanism.

############################################################################	
	Version:		
	1020.0.0524.2012	
	
	Reason:
	1. Revise NDIS selective suspend for external wakeup function
	
	Version:		
	1020.1.0531.2012	
	
	Reason:
	1. Revise radio on/off control for client

############################################################################	
	Version:		
	1021.0.0716.2012	
	
	Reason:
	1. Revise RSSI indication method
	2. Revise some bugs for Win8 WHCK requirement
	3. Revise AFE HW register settings
	
	Version:		
	1021.1.0816.2012	
	
	Reason:
	1. Revise Radio status inconsistency issue
	2. Fix memory leakage for N6 timer
	3. Fix data transfer fail when resuming from suspend state
	4. Fix BSOD issue while running WHCK test
	5. Fix Leisure power save Tx handling process to fix connection fail issue
	6. Fix vWiFi stress WHCK and system restart stress BSOD issue
	7. Fix connection fail when resuming from S3/S4 system power state
	8. Fix BSOD issue while running S5 cold reboot endurance test.
	9. BT device exception handling.
	
	Version:		
	1021.2.0904.2012	
	
	Reason:
	1. Improve WIN8 wifi direc link ability.
	2. Revise WIN8 selective suspend flow.
	
	Version:		
	1021.3.0912.2012	
	
	Reason:
	1. Revise handler for WIN8 FSS behavior.
	2. Add 92DU New PID/VID For Actiontec
	
	Version:		
	1021.4.0928.2012	
	
	Reason:
	1. Revise BT Coexistence mechanism to improve TP

############################################################################	
	Version:		
	1023.0.0823.2012	
	
	Reason:
	1. Support RTL8812AU.
	
	Version:		
	1023.1.0920.2012	
	
	Reason:
	1. Support RTL8821AU.
	
	Version:		
	1023.2.1123.2012	
	
	Reason:
	1. Support RTL8811AU.
	2. Support WIN8 for 802.11AC RTK WLAN series.
	3. Revise new channel plan definition.
	4. Revise TX throughpit start rate level.
	5. Fix 8812 XP scan fail.
	6. Fix 8821 scan fail.
	7. Support U2/U3 mode auto switch.
	8. Revise scan list display algorithm for customer.
	9. Revise the scan list handshake between Realtek UI and windowz auto config.
	11. Revise for WPS2.0 and 11N wifi test.
	12. Improve IOT performance with RTK AC AP.
	13. Improve WPA-TKIP link ability.
	14. Improve scan and startup speed.
	15. Add for 11AC pugfest 4 modification.
	16. Revise TX power constraint for customer.
	17. Improve TX throughput.
	18. Support high power 11AC series card.
	19. Fix the scan fail issue for Belkin 11AC AP in G mode.
	20. Fix site survey empty probelm for XP.

	Version:		
	1023.3.1203.2012
	1. Support high power 11AC dongle.
	2. Support 11n wifi pretest.

	Version:		
	1023.4.1218.2012	
	
	Reason:
	1.Improve unstable throughput when unplug and plug 8812AU. 
	2.Improve RX performance for middle/long range. 
	3.Prevent UI to get incorrect scan list. 
	4.Support U2/U3 mode switch OID query ability. 
	5.Support special channel plan for customer. 

	Version:		
	1023.5.0116.2013	
	
	Reason:
	1. Fix SoftAP DHCP issue.
	2. Improve U2/U3 switch smoothly and add some limitation.
	3. Revise copyright information.
	4. Support LDPC&STBC OID query/set ability.
	5. Revise TX power control flow. Fix power by rate and limit algorithm.
	6. Support USB20 power current limit mechanism.
	7. Fix VHT AMSDU enable condition.
	8. Fix Link rate and wireless mode illegal problem.
	9. Add new channel plan for customer.
	10. Improve USB mode switch behavior and speed.
	11. Add customerized power by rate table.


	Version:		
	1023.6.0225.2013	
	
	Reason:
	1. Improve win8 throughput stability in some case.
	2. Revise USB2.0 DMA parameters to improve stability.
	3. Improve IOT with Atheros 11ac AP especially in RX throughput.
	4. Fix Vista BSOD case when unload driver with dedicated platform.
	5. Support customerize features.
	6. Prevent init check conflict with firmware EFUSE read flow.
	7. Prevent transmit and receiv stop due to incorrect MAC mode.
	8. Revise LED behaviror for customer.


	Version:		
	1023.7.0408.2013	
	
	Reason:
	1. Revise USB 2/3 switch algorithm for all OS.
	2. Revise RX path to prevent BSOD due to DPC watchdog in win8.
	3. Revise DFS and adaptivity mechanism.
	4. Improve multicast performance.
	5. Support 802.11ac only wireless mode.
	6. Support 8812-VL/VS/VN IC.
	7. Fix link quality display rule for win7/win8.
	8. Revise scan list parsing rule for 5G AP.
	9. Improve RX performance for different application like file copy/iperf.


	Version:		
	1023.8.0524.2013	
	
	Reason:
	1. Add more USB 2/3 switch mode algorithm.
	2. Improve long distance perfomance with NEC 11ac AP.
	3. Fix init error on customerize module.
	4. Fix customer platfrom IOT issues.
	5. Fix customerize scan list mechanism.


	Version:		
	1023.9.0711.2013	
	
	Reason:
	1. Add REG for RCR settings for different customer requirement.
	2. Revise customized inf.
	3. Fix USB fast switch mode. 
	4. Revise incorrect USB XHCI packet length parsing.
	5. Fix 20/40MH switch rate adaptive mechanism.
	6. Fix R6300 periodic throughput drop at 2.4G 40M mode due to wifi cetification.
	7. Revise EFUSE parsing algorithm for different utilization.
	8. Update customerized channel plan to R06.
	9. Enhance adaptivity mechanism.

	Version:		
	1023.10.0812.2013	
	
	Reason:
	1. Revise beacon bandwidth parsing rule for AP IOT probelm.
	2. RTL8192CU revise TX power adjustment mechanism.


############################################################################		
	Version:		
	1024.0.0218.2013	
	
	Reason:
	1. Revise USB2.0 11AC series iperf RX performance setting.
	2. Revise for TR switch control flow.
	3. Support different board type for 11AC series.
	

	Version:		
	1024.1.0510.2013	
	
	Reason:
	1. Revise IQK for 11ac series.
	2. Support more board type for 8812AU.
	3. Revsie IOT issue with Atheros 11ac AP.
	4. Revise LED behavior
	5. Add customer's PID/VID
	6. Merge all 1023.6/7 driver's modification to improve performance.
	7. Support 8812A 256Q for customer.
	8. Revise 8812A USB mode siwtch mechanish for long distance.


	Version:		
	1024.2.0618.2013	
	
	Reason:
	1. [8812AU]: Fix improper init flow in 1024.1.
	2. [8812AU]: Fix USB switch fast mode scan limitation.
	3. [8812AU]: Fix win8 airplan mode switch error.
	4. [8812AU]: Update FW to V21.
	5. [8812AU]: Customize LED.
	6. [8812AU]: Enable AGC diff while channel switching.
	7. [8188RU]: Customize RSSI showed on UI.
	8. [All IC]: Add EnableAdaptivity reg to UI.


	Version:		
	1024.3.0718.2013	
	
	Reason:
	1. [8812AU]: improve beam forming, EFUSE parsing. Add tx duty support.
	2. [All IC]: Update more channel plan to R06.
	3. [8812AU]: Update to 1023.9 revision, Revise tx duty for thermal.
	4. [11acIC]: Revise for 2.4G 256QAM.
	4. [8188EU]: Revise power table parsing rule. 

	Version:		
	1024.4.0910.2013	
	
	Reason:
	1. Support coninstaller requirement for customers. 

	Version:		
	1024.5.0925.2013	
	
	Reason:
	1. Support channel plan R11.
	2. Fix Vwifi & STA concurrent mode RX error.
	3. [11AC] Support special VHT24G mode.
	4. Fix IOT probelm for infra structure mode,
	5. [92DU] fix customer report issues.
	6. [8723BU] fix init and scan
	7. Revise beamforing mechanism.
	8. [92EU] Fix WPS function.

	Version:		
	1024.6.1016.2013	
	
	Reason:
	1. [8812AU] Add more USB switch mode.
	2. [8812AU] Merge code from 1023 series driver.
	3. [8812AU] Default Enable Beamforming.
	4. [88EU] Revise Soft AP mode.
	5. [8812AU] Customize LED behavior.

	Version:		
	1024.7.1111.2013	
	
	Reason:
	1. Fix WPS handshake issue.
	2. Fix P2P memory leakage.

	Version:		
	1024.8.1211.2013	
	
	Reason:
	1. Add Channel Plan for Japan.
	2. [8723B] FIX IQK fatal bug.

	Version:		
	1024.9.1219.2013	
	
	Reason:
	1. [8812AU] Fix IOT with 8812AR.
	2. [88EU] FIX LED probelm.
	3. [92EU] FIX cannot scan issue.
	4. [88CU] Revise Rate index for transmit rate.
	5. [8812AU] Add more Ac mode judge for customer's requirement.
	6. Revise for Miracast.
	7. [92EU] Revise Led behavior.
	8. [88EU] Revise XP Soft AP operation.

############################################################################		
	Version:		
	1025.0.0509.2013	
	
	Reason:
	1. Revise for Winblue requirement.

############################################################################		
	Version:		
	1026.0.0712.2013	
	
	Reason:
	1. Support winblue for ALL RTWLANU.

	Version:		
	1026.1.0911.2013	
	
	Reason:
	1. Fix win8.1 OID support bug with MS filter driver.

	Version:		
	1026.2.1007.2013	
	
	Reason:
	1. Enlarge PS timeout only for BYD phone.

	Version:		
	1026.3.1008.2013	
	1. Fix BSOD in 1026.1/2 version.
	2. Revise miracast.

	Version:		
	1026.4.1023.2013	
	1. Revise customer's OID behavior.
	2. Revise miracast mechanism.
	3. [92DU] Improve performance.

	Version:		
	1026.5.1118.2013	
	1. [8821AU] Fix init issue. Revise rate display.
	2. Fix OID timeout issue.
	3. Fine tune P2P architecture.
	4. [88EU] Improve SOFT AP ability.
	5. [8821AU] support new IC.

	Version:		
	1026.6.1217.2013	
	1. Revise adaptivity mechanism.
	2. [88EU] revise LED behavior.
	3. [92EU] cannot scan issue when disable/enable
	4. [8812AU] Add AC mode judge from EFUSE.
	5. [8821AU] support wake on wlan.

	Version:		
	1026.7.0108.2014	
	1. Fix BT halt process.

############################################################################		
	Version:		
	1027.0.0611.2014	
	
	Reason:
	1. [8814AU] Add new IC support.
	2. Support WPP trace.
	3. [8723B] Add AOAC	

	Version:		
	1027.1.0902.2014	
	
	Reason:
	1. [8812] Revise power sequence
	2. [8723B] Revise IQK behavior
	
	Version:		
	1027.2.1001.2014	
	
	Reason:
	1. [8811] Customize scan functions.
	2. [8812] Update 8812 FW.
	
	Version:		
	1027.3.1015.2014	
	
	Reason:
	1. Fix re-connect too long when wake up. 
	2. [8812/8821/8814] Enable FW IQK.
	3. Fix WPS issue.
	4. Improve adaptivity.

	Version:		
	1027.4.1120.2014	
	
	Reason:
	1. Revise Tx power limit
	2. Enable adaptivity auto and Tx agg
	3. Fix composite device install issue

	Version:		
	1027.5.0105.2015	
	
	Reason:
	1. Remove Old IC support 8188CU/8192CU/8723AS-VAU/8192DU.
	2. Improve system logo pass ratio in some platform.
	3. Revise LDPC default setting to prevent some platform relative issues.

	Version:		
	1027.6.0417.2015	
	
	Reason:
	1. [8723BU] Update 8723B 1ant coexist version to 20140408 0x5a
	2. [8812AU] COMFAST noise adjustment
	3. [8192EU] Update PHY Parameters V45
	4. [WAPI] Support WAPI by INF
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web4, load: 1.36