# NVRAM file for BCM943430WLSELG # 2.4 GHz, 20 MHz BW mode # The following parameter values are just placeholders, need to be updated. manfid=0x2d0 prodid=0x0726 vendid=0x14e4 devid=0x43e2 boardtype=0x0726 boardrev=0x1101 boardnum=22 macaddr=00:90:4c:c5:12:38 sromrev=11 boardflags=0x00404201 xtalfreq=37400 nocrc=1 ag0=255 aa2g=1 ccode=ALL pa0itssit=0x20 extpagain2g=0 #PA parameters for 2.4GHz, measured at CHIP OUTPUT pa2ga0=-168,7161,-820 AvVmid_c0=0x0,0xc8 cckpwroffset0=5 # PPR params maxp2ga0=90 txpwrbckof=6 cckbw202gpo=0 legofdmbw202gpo=0x66111111 mcsbw202gpo=0x77711111 # OFDM IIR : ofdmdigfilttype=18 ofdmdigfilttypebe=18 # PAPD mode: papdmode=1 #papdvalidtest=3 il0macaddr=00:90:4c:c5:12:38 wl0id=0x431b deadman_to=0xffffffff # muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG muxenab=0x1 # CLDO PWM voltage settings - 0x4 - 1.1 volt #cldo_pwm=0x4 #Out-of-band GPIO Wakeup sd_gpout=0 sd_gpval=1 sd_gpdc=0Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.