;The file is winflash utility configuration file [Version] Version=00 ;Winflash utility will Display the value at top [Platform_Check] flag=1 ;This flag is the switch of comparing bios project id with rom file project id. ;When flag is 1, utility will check project id.If id doesn't match, utility will ;close the application. When flag is 0, utility won't check project id. [AC_Adapter] flag=1 ;This flag is the switch of checking AC. When flag is 1, utility will check AC. If no AC ;plug in, utility will display warnning message. When flag is 0, utility won't check AC. [Bios_Version_Check] flag=0 ;This flag is the switch of checking Bios Version. When flag is 1, utility will ;check Bios Version. If rom file Version is older than Bios, utility will display warnning ;message and close application. When flag is 0, utility won't check rom file version. [BootBlock] EC_flag=1 SYSTEM_flag=1 ;EC_flag and SYSTEM_flag are the swithches of controlling boot block protection. ;When EC_flag is 1, EC boot block will be protected. When EC_flag is 0, EC boot ;block will be programmed. ;When SYSTEM_flag is 1, SYSTEM boot block will be protected. When SYSTEM_flag is 0, ;SYSTEM boot block will be programmed. [4M_Flash_Configuration] EC_ENE910_BOOTBLOCK_Address_Start=0 EC_ENE910_BOOTBLOCK_Address_End=16 EC_NS591_BOOTBLOCK_Address_Start=0 EC_NS591_BOOTBLOCK_Address_End=24 SYSTEM_BOOTBLOCK_Address_Start=480 SYSTEM_BOOTBLOCK_Address_End=512 ;The size of SST39VF040 is 512 bytes. EC boot block range is from 0 to 16. SYSTEM boot block ;range is from 480 to 512. Winflash utility will use these boot block configuration to decide ;the location of boot block protection and check that the location of rom file isn't all 0x00 or 0xff.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.