idadapt.txt Driver File Contents (PROWinx64Legacy.exe)

ÿþIDADAPT - Intel PCI NIC Identification Utility

==============================================

November 2, 2015



CONTENTS

========

- OVERVIEW

- RUNNING THE UTILITY

- USAGE NOTES

- EXAMPLES

- LIMITATIONS

- DRIVER TO PCI ID CROSS REFERENCE





OVERVIEW

========



The Intel PCI NIC Identification Utility identifies Intel PCI adapters and

provides adapter properties and assigned resources. You can readily use this

information in batch, script and configuration files for automation purposes.



The utility returns the following values:



- Slot number. PCI slot number reported by the adapter; returned in decimal

format.



- SLOTX. PCI slot number reported by the adapter; For Gigabit solutions it is

returned in hexidecimal format.



- PCI device ID. Adapters sharing the same PCI device ID can use the same

driver. See the table at the end of this document showing the relationship

between drivers and PCI device IDs.



- SSID - PCI Subsystem ID and the Subvendor ID displayed in hexidecimal.



- MAC address. 12-digit Ethernet ID assigned to the adapter. This number is

also printed on the adapter label.



- Revision ID. Adapters with the same device ID may be distinguished with the

revision ID.





RUNNING THE UTILITY

===================

Using the "/?" option will display a list of supported command line options.

To run IDADAPT.EXE, you must start the computer in DOS. This utility should not

be run from a command prompt within any version of Microsoft Windows*, or in

any other non-DOS operating system. This utility should not be run with any

memory managers (such as EMM386) loaded.



IDADAPT.EXE can be run with no command line options, or with either of the

following command line options:



/B:<filename>

  Creates a file containing the adapter properties with the name specified. This

  file is in the format of a DOS batch file. If this file is named with the

  extension of .BAT, it can be executed as a batch file. Executing this batch

  file will create environment variables from the adapter properties.



/VERSION

  Displays IDADAPT version information and the diagnostic library version

  information.





NOTES

=====

IDADAPT.EXE will detect and return information on a maximum of sixteen adapters

in a computer.



Running the utility with no command line parameters displays the adapter

properties on the screen. For example, if you enter IDADAPT in a computer with

2 Intel PCI adapters installed, the display would resemble the following:



NIC1 SLOT=43 SLOTX=0068 PCI ID=1229 SSID=10118086 MAC=0002B31FE072 RevID=65

NIC2 SLOT=47 SLOTX=0069 PCI ID=1031 SSID=10118086 MAC=0090270AAF73 RevID=32



In the above example, the first adapter has the following properties:

- Logical slot is 43

- SLOTX is 0068

- PCI device ID is 1229

- SSID is 10118086

- MAC address is 0002B31FE072

- The revision ID is 65



If the utility does not find any adapters, it reports "No supported adapters

were found" and returns an error level of 1. You can use the error level for

conditional branching in batch files.



If you run the utility using /B:<filename>, it creates a file with the name you

specified. This file contains adapter properties in a batch file format. This

is an example batch file:



SET NIC1_SLOT=43

SET NIC1_SLOTX=0068

SET NIC1_PCIID=1229

SET NIC1_SSID=10118086

SET NIC1_MAC=0002B31FE072

SET NIC1_REVID=65

SET NIC2_SLOT=47

SET NIC2_SLOTX=0069

SET NIC2_PCIID=1031

SET NIC2_SSID=10118086

SET NIC2_MAC=0090270AAF73

SET NIC2_REVID=32



If the name you assign to the file ends in .BAT, it can be executed in DOS.

Executing the file sets environment variables for each property of each adapter.



Once the environment variables are created by the batch file, you can insert

the values into configuration files as needed. See examples below. When using

this batch file, remember that about 64 bytes of environment space will be

needed for each adapter found. Ensure that you make sufficient environment

space available in your configuration.





EXAMPLES

========



Example 1:

To create a startup disk that loads a Packet Driver named PCKTDRVR.COM on the

second found NIC, the AUTOEXEC.BAT file might contain the following:

IDADAPT /B:INTELSET.BAT

IF ERRORLEVEL 1 GOTO NO_NIC

CALL INTELSET.BAT

PCKTDRVR 0x60 %NIC2_SLOT%

GOTO END

:NO_NIC

ECHO NO ADAPTER FOUND!!

PAUSE

:END



Example 2:

To create a startup disk that automatically detects the adapter model and loads

the proper DOS ODI driver, the AUTOEXEC.BAT file might contain the following:

IDADAPT /B:INTELSET.BAT

IF ERRORLEVEL 1 GOTO NO_NIC

CALL INTELSET.BAT

LSL

IF "%NIC1_PCIID%" == "1229" GOTO PRO100

IF "%NIC1_PCIID%" == "2449" GOTO PRO100

IF "%NIC1_PCIID%" == "1000" GOTO PRO1000

IF "%NIC1_PCIID%" == "1001" GOTO PRO1000

IF "%NIC1_PCIID%" == "1002" GOTO PRO1000

IF "%NIC1_PCIID%" == "1003" GOTO PRO1000

IF "%NIC1_PCIID%" == "1004" GOTO PRO1000

GOT0 NO_NIC

:PRO100

E100BODI

GOTO CONTINUE

:PRO1000

E1000ODI

GOTO CONTINUE

:CONTINUE

IPXODI

VLM /V4

GOTO END

:NO_NIC

ECHO !! NO SUITABLE ADAPTER FOUND !!

PAUSE

:END





CUSTOMER SUPPORT

================

- Main Intel web support site: http://support.intel.com



- Network products information: http://www.intel.com/network





Legal / Disclaimers

===================

Copyright (C) 2003 - 2015, Intel Corporation. All rights reserved.



Intel Corporation assumes no responsibility for errors or omissions in this

document. Nor does Intel make any commitment to update the information

contained herein.



Intel and the Intel logo are trademarks of Intel Corporation or its

subsidiaries in the U.S. and/or other countries.



*Other names and brands may be claimed as the property of others.



This software is furnished under license and may only be used or copied in

accordance with the terms of the license. The information in this manual is

furnished for informational use only, is subject to change without notice, and

should not be construed as a commitment by Intel Corporation. Intel Corporation

assumes no responsibility or liability for any errors or inaccuracies that may

appear in this document or any software that may be provided in association

with this document. Except as permitted by such license, no part of this

document may be reproduced, stored in a retrieval system, or transmitted in any

form or by any means without the express written consent of Intel Corporation.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.35