/* * README: WPS STA as an Enrollee or Registrar */ 0. Build WPS function. Please set 'HAS_WSC=y'. 1. Enrollee Mode 1.1) PIN mode: Running Scenarios (case 'a' and 'b') -------------------------------------------------------- a. Adding an Enrollee to AP+Registrar (EAP) [AP+Registrar]<----EAP--->[Enrollee Client] -------------------------------------------------------- b. Adding an Enrollee with external Registrar (UPnP/EAP) [External Registrar]<----UPnP--->[AP_Proxy]<---EAP--->[Enrollee Client] -------------------------------------------------------- Note: 'EAP' indicates to use wireless medium and 'UPnP' indicates to use wired or wireless medium. (i) [Registrar] or [AP+Registrar] Enter the Enrollee PinCode on the Registrar and start WPS on the Registrar. Note: How to get the Enrollee PinCode? Use 'iwpriv ra0 stat' on the Enrollee. (ii)[RT2860 Linux WPS STA] iwpriv ra0 wsc_conf_mode 1 ;; Enrollee iwpriv ra0 wsc_mode 1 ;; PIN iwpriv ra0 wsc_ap_band 0 (or 1) ;; 0: prefer 2.4G, 1: prefer 5G iwpriv ra0 wsc_ssid "AP's SSID" iwpriv ra0 wsc_start {iii) If the registration is successful, the Enrollee will be re-configured with the new parameters, and will connect to the AP with these new parameters. 1.2) PBC mode: Running Scenarios (case 'a' only) -------------------------------------------------------- a. Adding an Enrollee to AP+Registrar (EAP) [AP+Registrar]<----EAP--->[Client] -------------------------------------------------------- (i) [AP+Registrar] Start PBC on the Registrar. {ii)[RT2860 Linux WPS STA] iwpriv ra0 wsc_conf_mode 1 ;; Enrollee iwpriv ra0 wsc_mode 2 ;; PBC iwpriv ra0 wsc_ap_band 0 (or 1) ;; 0: prefer 2.4G, 1: prefer 5G iwpriv ra0 wsc_start {iii) If the registration is successful, the Enrollee will be re-configured with the new parameters, and will connect to the AP with these new parameters. 2. Registrar Mode 2.1) PIN mode: Running Scenarios (case 'a' and 'b') -------------------------------------------------------- a. Configure the un-configured AP [Unconfigured AP]<----EAP--->[Registrar] -------------------------------------------------------- b. Configure the configured AP [Configured AP]<----EAP--->[Registrar] -------------------------------------------------------- (i) [AP] Start PIN on the Enrollee WPS AP. (ii)[RT2860 Linux WPS STA] iwpriv ra0 wsc_conf_mode 2 ;; Registrar iwpriv ra0 wsc_mode 1 ;; PIN iwpriv ra0 wsc_pin xxxxxxxx ;; AP's PIN Code iwpriv ra0 wsc_ap_band 0 (or 1) ;; 0: prefer 2.4G, 1: prefer 5G iwpriv ra0 wsc_ssid "AP's SSID" iwpriv ra0 wsc_start {iii) If the registration is successful; in case 'a': The Registrar will be re-configured with the new parameters, and will connect to the AP with these new parameters; in case 'b': The Registrar will be re-configured with AP's configurations, and will connect to the AP with these new parameters. 2.2) PBC mode: same scenarios as PIN mod (i) [AP] Start PBC on the Enrollee WPS AP. (ii)[RT2860 Linux WPS STA] iwpriv ra0 wsc_conf_mode 2 ;; Registrar iwpriv ra0 wsc_mode 2 ;; PBC iwpriv ra0 wsc_ap_band 0 (or 1) ;; 0: prefer 2.4, 1: prefer 5G iwpriv ra0 wsc_start {iii) If the registration is successful; in case 'a': The Registrar will be re-configured with the new parameters, and will connect to the AP with these new parameters; in case 'b': The Registrar will be re-configured with AP's configurations, and will connect to the AP with these new parameters. 3. Others iwpriv ra0 wsc_cred_count 1 ;; Set count of credentials, Only support one credential for M8 in Registrar mode. integer: 1 ~ 8 iwpriv ra0 wsc_cred_ssid "idx ssid_str" ;; Set SSID into credtentail[idx] string: idx: 0 ~ 7 ssid_str: SSID for AP example: iwpriv ra0 wsc_cred_ssid "0 wps_ap1" iwpriv ra0 wsc_cred_auth "idx auth_str" ;; Set AuthMode into credtentail[idx] string: idx: 0 ~ 7 auth_str: OPEN, WPAPSK, WPA2PSK, SHARED, WPA, WPA2 example: iwpriv ra0 wsc_cred_auth "0 WPAPSK" iwpriv ra0 wsc_cred_encr "idx encr_str" ;; Set EncrypType into credtentail[idx] string: idx: 0 ~ 7 encr_str: NONE, WEP, TKIP, AES example: iwpriv ra0 wsc_cred_encr "0 TKIP" iwpriv ra0 wsc_cred_keyIdx "idx key_index" ;; Set Key Index into credtentail[idx] string: idx: 0 ~ 7 key_index: 1 ~ 4 example: iwpriv ra0 wsc_cred_keyIdx "0 1" iwpriv ra0 wsc_cred_key "idx key" ;; Set Key into credtentail[idx] string: idx: 0 ~ 7 key: ASCII string (wep_key_len(=5,13), passphrase_len(=8~63)) OR Hex string (wep_key_len(=10,26), passphrase_len(=64)) example: iwpriv ra0 wsc_cred_key "0 12345678" ;; Passphrase iwpriv ra0 wsc_cred_key "0 abcd" ;; WEP Key iwpriv ra0 wsc_cred_mac "idx mac_str" ;; Set AP's MAC into credtentail[idx] string: idx: 0 ~ 7 mac_str: xx:xx:xx:xx:xx:xx example: iwpriv ra0 wsc_cred_mac "0 00:11:22:33:44:55" iwpriv ra0 wsc_conn_by_idx 0 ;; Connect AP by credential index. integer: 0 ~ 7 iwpriv ra0 wsc_auto_conn 0 ;; If the registration is successful, driver will re-connect to AP or not. integer: 0 ;; Disabled, driver won't re-connect to AP with new configurations. 1 ;; Enabled, driver will re-connect to AP with new configurations. Note. Default value is 1. iwpriv ra0 wsc_stop ;; Stop WSC work and don't wait upon two-minute timeout iwpriv ra0 wsc_ap_band val val: 0 ;; prefer 2.4G AP 1 ;; prefer 5G AP 2 ;; Auto iwpriv ra0 stat ;; Read statistics counter and WPS status.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.