D-Link DFE-530TX PCI Fast Ethernet Adapter Installation
for SCO OpenServer V5.0 MDI Driver
Getting Started
---------------
0. Login as root user. (On maintenance mode)
1. Using "custom" to install the driver
1.1 Prepare an image file
Copy d5B.IMG onto SCO OpenServer and rename it to VOL.000.000
# mkdir /usr/test
# doscp a:/<PATH>/d5B.IMG /usr/test/VOL.000.000
* <PATH> is the driver directory
1.2 Execute "custom"
/* A menu selection screen will be popped up */
Using [->] key to move cursor to "Software" menu item then
press [] key to get into pull down menu then move to
"Install New..." then press [ENTER] key
ÉÍÍÍÍÍÍÍÍÍÍ Begin Installation on scoopen ÍÍÍÍÍÍÍÍÍÍ»
º º
º What host (machine) do you want to install from? º
º º
º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º
º ³<*> From scoopen ³ º
º ³< > From another host ³ º
º ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º
º º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ Continue ] [ Cancel ] [ Help] º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Select From scoopen and use [TAB] key to move cursor to
[ Continue ] then press [ENTER] key and press [] key to get
into pull down menu
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Select Media ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Insert media, and select media device. º
º º
º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º
º Media Device:³|Floppy Disk Driver 0_____________________|v³ º
º ÀÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º
º ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º º
º º³*Floppy Disk Driver 0 ³º º
º º³ Media Images ³º º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ Continue ] ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ [ Help ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
-> Select "Media Images" and use [TAB] key to move cursor to
[ Continue ] then press [ENTER] key then press [ENTER] key
again
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Enter Image Directory ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Enter the full path to the directory containing media images. º
º º
º Image Directory: |/usr/test__________________________________________| º
º º
º Note: media images must follow the naming convention VOL.000.000, etc. º
º º
º º
º º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ OK ] [ Cancel ] [ Help ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
-> Input the path name where VOL.000.000 is located as above
path name is /usr/test
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Enter Image Directory ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Installing: D-Link DFE-530TX PCI Fast Ethernet Device Driver (version 1.0º
º º
º Do you want a FULL or PARTIAL installation? º
º º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ Full ] [ Partial ] [ Cancel ] [ Help ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Using [TAB] key to move cursor to [ Full ] then press [ENTER] key
After the installation progress the following message is displayed
ÉÍÍÍÍÍÍÍÍÍÍÍ Question ÍÍÍÍÍÍÍÍÍÍ»
º Installation complete º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º [ OK ] º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Press [Enter] key then you will find out that
D-Link DFE-530TX PCI Fast Ethernet Device Driver (ver 1.0.2)
is added to the package list
Using [<-] key to move cursor back to "Host" menu item then
press [] key to get into pull down menu then move to "Exit"
then press [ENTER] key
Now that the driver is installed in the system successfully.
2. Using "netconfig" to configure the driver
/* A menu selection screen will be popped up */
At "Hardware" menu item press [] key to get into pull down menu then
move to "Add new LAN adapter" then press [ENTER] key
If you got a PCI NIC inserted on your machine, it will list as
following:
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add new LAN adapter ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ºThe following adapters have been found: º
ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º
º³* D-Link DFE-530TX PCI Fast Ethernet Adapter - PCI Bus 0, PCI Dev 11, PC³º
º³ ³º
º³ ³º
º³ ³º
º³ ³º
ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº
º[ Configure hardware not listed above... ] º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ Continue ] [ Cancel ] [ Help ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
If the "D-Link DFE-530TX PCI Fast Ethernet Adapter..." has been
displayed press [ENTER] directly, otherwise using [TAB] key to
move to "Configure hardware not listed above..." then press
[ENTER] key
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add new LAN adapter ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ºSelect network adapter to be added: º
ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º
º³* 3Com EtherLink 16/16TP Adapter ^º
º³ . *º
º³ . *º
º³ . *º
º³ . *º
º³ . *º
º³ . *º
º³ . *º
º³ D-Link DFE-530TX PCI Fast Ethernet Adapter *º
º³ . ³º
º³ . ³º
º³ . ³º
º³ . ³º
º³ . ³º
º³ . vº
ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ Continue ] [ Cancel ] [ Help ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Using [] key to move to "D-Link DFE-530TX PCI Fast Ethernet Adapter"
then press [ENTER] key.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Network Driver Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
ºEnter the configuration of D-Link DFE-530TX PCI Fast Ethernet Adapter:º
º º
º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ [ Advanced ] º
º PCI Bus#: ³| 0_______________________|v³ Options... º
º ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º
º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º
º PCI Device#: ³| 0_______________________|v³ º
º ÀÉÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º
º ÚºÚÄÄÄÄÄÄ¿ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º
ºPCI Function#: ³º³ 9 ^º________________|v³ º
º Àº³ 10 ³ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ º
º º³ 11 ³º º
º * - indicates º³ 12 *ºith other hardware º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ³* 13 *ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ OK ] º³ 14 vº [ Cancel ] [ Help ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͺÀÄÄÄÄÄÄÙºÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
ÈÍÍÍÍÍÍÍͼ
The above screen let you fill the information of where your PCI adapter
is located by specifying PCI Bus#, PCI Device# and PCI Function#.
Note1: If you can not make sure the PCI parameters or your PCI Device#
can not be found in the list, just leave them as default values,
continue the following installation, after the driver is
installed and system is re-linked, reboot the system then driver
will search PCI Ethernet card automatically.
"Advanced Options" let you specify what media type is connectted.
If you select it the following screen will be popped up
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Advanced Network Driver Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
ºEnter the configuration of D-Link DFE-530TX PCI Fast Ehternet Adapter: º
º º
º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º
ºMedia Type: ³| Auto_________________|v³ º
º ÀÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»ÄÄÄÄÄÙ º
º º ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º º
º * - indicatº ³* Auto ³ºher hardware º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄĺ ³ TP ³ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ OK ] º ³ TP_FD ³ºel ] [ Help ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍͺ ³ TX100 ³ºÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
º ³ TX100_FD ³º
º ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Select the connective media then press [ENTER] key to go back to
"Network Driver Configuration" screen.
Using [TAB] key to move cursor to "OK" then press [ENTER] key.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Information ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º--- Please verify adapter is set to the configuration just enteredº
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º [ OK ] º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Press [ENTER] key.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Add Protocol ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
ºSelect one networking product to be added to º
ºD-Link DFE-530TX PCI Fast Ethernet Adapter: º
ºÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿º
º³ HW D-Link DFE-530TX PCI Fast Ethernet Adapter ³º
º³* - SCO IPX/SPX ³º
º³ - SCO TCP/IP ³º
º³ ³º
º³ ³º
ºÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙº
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ Add ] [ Cancel ] [ Help ]º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Using [] key to move cursor to "SCO TCP/IP" then press [ENTER] key.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ SCO TCP/IP Configuration ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º º
º º
º º
º Local Host Name: |scoopen_____________| [ Advanced ]º
º IP Address: |192.9.200.1_________| Options... º
º Netmask: |255.255.255.0_______| º
ºBroadcast Address: |192.9.200.255_______| º
º Domain Name: |scoopen.com_________| º
º TCP connections: |256_________________| º
º Pseudo ttys: |32__________________| º
º º
º º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º º
º [ OK ] [ Cancel ] [ Help ]º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Input the required information then use [TAB] key to move cursor to
"OK" then press [ENTER] key.
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Message ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º The following products were successfully configured into the system º
º SCO TCP/IP º
º D-Link DFE-530TX PCI Fast Ethernet Adapter - PCI Bus#0,PCI Device#13,Pº
º º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º[ OK ] [ Help ] º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Press [ENTER] key
At "Hardware" menu item press [] key to get into pull down menu then
move to "Exit" then press [ENTER] key
ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Question ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º The Unix Kernel must be re-linked before the changesº
º??? made here will have an effect. º
º Do you want to re-link the kernel now? º
ºÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄĺ
º [ YES ] [ NO ] º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Press [ENTER] key
Do you want this kernel to boot by default (y/n) y
Do you want the kernel environment rebuilt (y/n) y
3. Reboot unix
# shutdown -y -g0
***************************************************
* Another way to specify driver's PCI parameters *
***************************************************
. Another way to modify PCI parameters is at booting
time, shown as below:
1. Specify PCI Bus#, PCI Device# and PCI Function#
Boot
: unix net.mdi=d5B(0) net.param=(pcb:0,pcd:14,pcf:0)
2. Auto-search PCI adapter card
Boot
: unix net.mdi=d5B(0)
Note2: The IRQ number must match with the value set in ROM-BIOS before you
specify this value, please check it.
The IRQ for PCI bus can be accessed by pressing [DEL] key when
system is power on and choose the proper select item to set IRQ
for PCI bus.
Example: ROM PCI/ISA BIOS (2A4X5C31)
PCI/GREEN FUNCTION SETUP
AWARD SOFTWARE, INC.
Press [DEL] key --> PCI/GREEN FUNCTION SETUP
Slot 3 Using INT# : A-PIRQ1
.
.
.
PIRQ1# Connect IRQ: 5 By Single
~
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.