OEMSETNT.INF Driver File Contents (dfe530tx.zip)

; 
;  OEMSETNT.INF
;
;   Ths INF file is used to installing LAN adapter driver for Windows NT.
;
;   Supported OS: Windows NT 3.51 / NT 4.0
;   Supported adapters:
;
;       D-Link DFE-530TX PCI Fast Ethernet Adapter
;
;   Usage:
;
;       This file is the installation/configuration/deinstallation
;       procedure of the driver for Windows NT. It can be called
;       from Windows Setup directory, or via the Windows NT Networks
;       Control Program Applet (NCPA) from inside the Windows
;       Control Panel
;

[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    PCI
[Options]
    VT3043
[ConnectionChoicesVT3043]
    Connect_0 = "Auto-Negotiation", 0
    Connect_1 = "100BaseTx Half_Duplex", 1
    Connect_2 = "100BaseTx Full_Duplex", 2
    Connect_3 = "10BaseT   Half_Duplex", 3
    Connect_4 = "10BaseT   Full_Duplex", 4
[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "D-Link Corporation"
; Driver Version info
; VERSION.... 2.29
ProductMajorVersion     = "2"
ProductMinorVersion     = "29"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

; DEVICE_ID....
; (0x1106 == 4358)
VendorID = 4358                         

ProductSoftwareName = "DLKFET"
ProductSoftwareTitle = "DLKFET Adapter Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\DLKFET.sys"
NetRuleSoftwareType = "DLKFETSys ndisDriver DLKFETDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """DLKFETSys"" yes no container"
NetRuleSoftwareClass = {"DLKFETDriver basic"}
NetRuleSoftwareSWBindable = {"DLKFETDriver DLKFETAdapter non exclusive 100"}

OptionHelpFile = "DLKFET.hlp"
ProductHardwareName = "DLKFET"

ProductHardwareVT3043Title = "D-Link DFE-530TX PCI Fast Ethernet Adapter"
NetRuleHardwareVT3043Type  = "DLKFET DLKFETAdapter"
NetRuleHardwareVT3043Class = {"DLKFETAdapter basic"}
AdapterVT3043Type = 5   ;; PCI board
HelpVT3043Id = 30
; DEVICE_ID....
; VT3043 (0x30431106 == 809701638)
VT3043CFID = 809701638                 



NetRuleHardwareBindForm = " yes yes container"
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers

;
;   Add by David Hsieh
;
;       These constants are used to detect the version of the target
;       Windows NT system and copy related NDIS driver.
;
NT351VersionConstant = "3.51"
NT40VersionConstant = "4.0"
Ndis3FilePath = "ndis3"
Ndis4FilePath = "ndis4"
HelpFilePath = ""

[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)

[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
           goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    ;
    ;   Change "Set !G:DebugOutputControl = 0" to 1 in
    ;   \WINNT\SYSTEM32\NCPASHEL.INF for debug support.
    ;
    ;   Add by David Hsieh
    ;   (Unmark the following line to enable debug.)
    ;;;Set !G:DebugOutputControl = 1 ;; Debug output {1=turnd on, 0=turned off}

    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(Function$(Option)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    ;
    ;   Get the version of Windows NT we are installing on.
    ;   We support only Windows NT3.51&4.0
    ;                                   Add by David Hsieh
    set CurrentVersionValue = ""
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(!REG_KEY_READ) KeyNt
    ifstr(i) $(KeyNt) != ""
        GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue
        Debug-Output "$(InfFile) $(Option): Windows NT Current Version ="$(CurrentVersionValue)
        CloseRegKey $(KeyNt)
    endif
    set TargetVersion = *($(CurrentVersionValue),4)
    Debug-Output "$(InfFile) $(Option): Current Version:"$(TargetVersion)
    ifstr $(TargetVersion) == $(NT351VersionConstant)
        set DriverFilePath = $(Ndis3FilePath)
        Debug-Output "$(InfFile) $(Option): Windows NT 3.51"
    else-ifstr $(TargetVersion) == $(NT40VersionConstant)
        set DriverFilePath = $(Ndis4FilePath)
        Debug-Output "$(InfFile) $(Option): Windows NT 4.0"
    else
        set Error = "This driver does not support Windows NT version "*($(CurrentVersionValue),4)" !"
        Debug-Output "$(InfFile) $(Option): Unsupported NT version"
        goto fatal
    endif
    Split-String $(SrcDir) "\" SourceList
    Debug-Output "SourceList:"$(SourceList)
    QueryListSize SLSize $(SourceList)
    Debug-Output "SourceListSize:"$(SLSize)
    ifstr *($(SourceList),$(SLSize)) == "\"
        set DriverSourcePath = $(DriverFilePath)
        set HelpSourePath = $(HelpFilePath)
    else
        set DriverSourcePath = "\"$(DriverFilePath)
        set HelpSourcePath = "\"$(HelpFilePath)
    endif
    Debug-Output "DriverSourcePath: "$(DriverSourcePath)
    Debug-Output "HelpSourcePath; "$(HelpSourcePath)
    ;
    ; Get NT version Done
    ;
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
          Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
               Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
               ifint $($ShellCode) != $(!SHELL_CODE_OK)
                     goto ShellCodeError
               endif
               set Error = $($R0)
               set from = end
               set to = end
               goto nonfatalinfo
          else
               set StartLabel = configureadapter
          endif
   else
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
;;;           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
;;;               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
           endif
           goto end
        else
;;;           Shell $(UtilityInf), CardExistedDlg
;;;           ifint $($ShellCode) != $(!SHELL_CODE_OK)
;;;              goto ShellCodeError
;;;           endif
;;;           ifstr(i) $($R1) != "OK"
;;;               set CommonStatus = STATUS_USERCANCEL
;;;               goto end
;;;           endif
           set OldVersionExisted = $(TRUE)
        endif
    Endif
    ifstr(i) $(DoCopy) == "YES"
        Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
        Ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Goto ShellCodeError
        Else-Ifstr(i) $($R0) == STATUS_FAILED
            Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
            endif
            set Error = $($R0)
               Goto fatal
        Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
               Goto successful
        Endif
        Set SrcDir = $($R1)
        install "Install-Hlp"
    endif
    Goto installproduct
configureadapter = +
    Ifstr(i) $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
           Goto fatalregistry
        Endif
    Endif
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        Ifstr(i) $(ValueName) == "ConnectionType"
            set ConnectionIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "NetworkAddress"
            set NetworkAddress = $(ValueData)
        endif
    EndForListDo
    set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
    ifstr(i) $(ConnectionValue) == ""
        set ConnectionValue = *($(ConnectionList), 2)
    endif
adapteroptions = +
    set from = adapteroptions
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        set ConnectionIndex = $(Combo1Out)
        set NetworkAddress = *($(EditTextOut),1)
        ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
        set CommonStatus = STATUS_USERCANCEL
        ui pop 1
        goto end
    else
        ui pop 1
        goto end
    endif
    set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
    ifstr(i) $(!NTN_InstallMode) == configure
        goto updateparameters
    endif
installproduct =+
    StartWait
    set-div DeviceID = $($(Option)CFID) 65536
    Debug-Output "Option: "$(Option)
    Debug-Output "CFID: "$($(Option)CFID)
    Debug-Output "VendorID: "$(VendorID)
    Debug-Output "DeviceID: "$(DeviceID)
    Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R0) == {}
        set Error = $(CANNOT_FIND_ANY_CARD)
        set CommonStatus = USER_CANCEL
        set from = end
        goto nonfatal
    endif
    set AdapterList = $($R0)
    ifint $(OldVersionExisted) == $(FALSE)
        Ifstr(i) $(DoCopy) == "YES"
           Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
           Ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Goto ShellCodeError
           Else-Ifstr(i) $($R0) == STATUS_FAILED
               Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
               ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  goto ShellCodeError
               endif
               set Error = $($R0)
               Goto fatal
           Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
               Goto successful
           Endif
           Set SrcDir = $($R1)
        Endif
        install "Install-Option"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
           Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
           endif
           set Error = $($R0)
           goto fatal
        endif
    endif

    ;
    ;   Check to see if the product Software key exists already in the system
    ;   service keys before we try to add the software component.
    ;
    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_READ) KeyNt
    CloseRegKey $(KeyNt)

    Ifstr(i) $(KeyNt) == ""
        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
            $(NetEventDLL)
        Set OEM_ABANDON_SOFTWARE = TRUE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif
        Set SoftProductKey      = $($R1)
        Set SoftNetRuleKey      = $($R2)
        Set SoftServiceKey      = $($R3)
        Set SoftParameterKey    = $($R4)
        Set SoftLinkageKey      = $($R5)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalregistry
        endif
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                            {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            goto fatalregistry
        endif
    endif

    ForListDo $(AdapterList)
        set BusNum = *($($),1)
        set DeviceNum = *($($),2)
        set FunctionNum = *($($),3)     
        Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
            $(DeviceNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        ifstr $($R0) != "NO_ERROR"
            set Error = $($R0)
            goto fatal
        endif
        ifstr(i) $($R1) != "YES"
            Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
            ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
            endif
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                EndWait
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
            endif
            set ConnectionIndex = 0
            set ConnectionValue = *($(ConnectionList),~($(ConnectionValues),$(ConnectionIndex)))
            read-syms FileDependentDlg$(!STF_LANGUAGE)
            SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)

            ;
            ;   UNATTENDED installation support
            ;   During UNATTENDED installation, DO NOT show the dialog box to prompt the
            ;   user to select options.
            ;                                           Add by David Hsieh
            ifstr $(!STF_GUI_UNATTENDED) != "YES"
                ui start "InputDlg"
                ifstr(i) $(DLGEVENT) == "CONTINUE"
                    set ConnectionIndex = $(Combo1Out)
                    set NetworkAddress = *($(EditTextOut),1)
                    ui pop 1
                else-ifstr(i) $(DLGEVENT) == "BACK"
                    set CommonStatus = STATUS_USERCANCEL
                    ui pop 1
                    goto setfailed
                else
                    ui pop 1
                    goto setfailed
                endif
            endif
            ;

            set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
            Set HardNetCardKey      = $($R1)
            Set HardNetRuleKey      = $($R2)
            Set HardParameterKey    = $($R3)
            set AdapterNumber = $($R4)
            set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                                {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                                {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                                {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set BusTypeNum = 5
            set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
                                {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                                {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$($(Option)CFID)},+
                                {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            ifint $($(Option)CFID) == $(VT3043CFID) 
                set NewValueList = {{StoreAndForward,$(NoTitle),$(!REG_VT_DWORD),1},+
                                    {TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),512}}
                Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
            endif
            set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
            set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
            set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                                {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                                {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                                {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            CloseRegKey $(HardNetCardKey)
            CloseRegKey $(HardNetRuleKey)
            set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                                {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                                {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            CloseRegKey $(HardParameterKey)
        endif       
    EndForListDo
    EndWait
    goto successful
updateparameters =+
    set HardParameterKey    = $($R3)
    set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)},+
                        {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    CloseRegKey $(KeyParameters)
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
UpgradeSoftware = +
     OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
     Ifstr $(KeyProduct) != $(KeyNull)
           Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error"
               goto ShellCodeError
           endif
           set !UG_Filename = $($R0)
           install "Install-Update"
           ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
               goto fatal
           endif
           SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
           SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
           CloseRegKey $(KeyProduct)
     else
           goto fatalregistry
     endif
     goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir)$(DriverSourcePath) $(!STF_WINDOWSSYSPATH)\drivers
        Debug-Output "AddSectionFilesToCopyList SrcPath: "$(SrcDir)$(DriverSourcePath)
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    Exit
[Install-Hlp]
    set STF_VITAL = ""
    AddSectionFilesToCopyList Files-Hlp $(SrcDir)$(HelpSourcePath) $(!STF_WINDOWSSYSPATH)
    Debug-Output "AddSectionFilesToCopyList SrcPath: "$(SrcDir)$(HelpSourcePath)
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    Exit
[Install-Update]
    set STF_VITAL        = ""
    set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
    AddSectionFilesToCopyList Files-Hlp $(SrcDir)$(HelpSourcePath) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-$(Option) $(SrcDir)$(DriverSourcePath) $(!STF_WINDOWSSYSPATH)\drivers
    Debug-Output "AddSectionFilesToCopyList SrcPath: "$(SrcDir)$(DriverSourcePath)
    Debug-Output "AddSectionFilesToCopyList SrcPath: "$(SrcDir)$(HelpSoucePath)
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    exit
[Source Media Descriptions]
    1  = "D-Link DFE-530TX NDIS Driver Diskette"
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
STF_PLATFORM = Alpha
[Files-Inf]
2,      oemsetnt.inf,    SIZE=1000,     RENAME=$(!UG_Filename)
[Files-VT3043]
1,DLKFET.sys , SIZE=99999, RENAME=DLKFET.sys
[Files-Hlp]
1,DLKFET.hlp , SIZE=999
[LanguagesSupported]
    ENG
[OptionsTextENG]
    VT3043  = "D-Link DFE-530TX PCI Fast Ethernet Adapter"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSoftwareDescription = "DLKFET Driver"

FunctionVT3043Title = "D-Link DFE-530TX PCI Fast Ethernet Adapter Setup"
ProductHardwareVT3043Description = "D-Link DFE-530TX PCI Fast Ethernet Adapter"

ConnectionList  = ^(ConnectionChoices$(Option), 1)
ConnectionValues = ^(ConnectionChoices$(Option), 2)
NoList  = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle     = "Error: "$(Function$(Option)Title)
ShellCodeErrorText      = "Shell Code Error."
CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[FileDependentDlgENG]
;DlgText = "Choose the proper cable type for the "+
;          "network adapter. Select [Help] for a detailled "+
;          "description of the available options of the list."
DlgTemplate = "IBMTOK2"
DlgType = "RadioCombination"
Caption = $(Function$(Option)Title)
Combo1Label = "&Connection Type:"
Combo1List = $(ConnectionList)
Combo1Out  = $(ConnectionValue)
ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditTextLim = 12
EditTextIn = $(NetworkAddress)
Edit1Label = "&NetworkAddress"
;CBOptionsGreyed = {}
MinHelpId = 10
MaxHelpId = 1140
HelpContext = $(Help$(Option)Id)


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.45