D-Link DFE-530TX PCI Fast Ethernet Adapter Installation
for Personal NetWare
Contents
--------
- Introduction
- Getting Started
Introduction
------------
The ODI driver program allows you to run multiple protocol
stacks and install up to two network adapters in a workstation.
This ODI driver supports the Port, Node Address, Protocol and
Frame options for creating your own NET.CFG file. For more
information on these keywords, please refer to Novell's
"NetWare ODI shell for DOS - NET.CFG options". This installation
assumes that the drivers are working properly.
Getting Started
---------------
The NOVELL Personal NetWare installation diskettes are needed to
complete this install.
1. Follow the normal installation procedure as described by
Personal NetWare.
2. It will prompt the user for a network driver choose "Other
Network support driver".
3. It will request a path for the drivers. Respond with the
path of the ODI DOS driver and NET.CFG sample installed
with this readme.
4. After completion of the installation procedure, modify the
following lines in your STARTNET.BAT file from:
LSL
NE2000
IPXODI
CLIENT
to:
LSL
DLKFET
IPXODI
CLIENT
5. Append the <PATH>\NET.CFG file to the NWCLIENT directory.
This directory was created when you installed Personal
NetWare . <PATH> is the directory where NET.CFG resides.
6. Run STARTNET to access the Novell network.
Parameters supported by the NET.CFG for DLKFET.COM driver
---------------------------------------------------------
Protocol IPX
Bind #1
Link Driver DLKFET
frame Ethernet_802.3
;frame Ethernet_802.2
;frame Ethernet_II
;frame Ethernet_SNAP
Protocol IPX 00 Ethernet_802.3
;Protocol IPX E0 Ethernet_802.2
;Protocol IPX 8137 Ethernet_II
;Protocol IPX 8137 Ethernet_SNAP
;Optional driver keywords:
;--------------------------------
AUTOSENSE ;Autosense media type
;10BaseT ;Force the driver to 10Mbps half duplex mode.
;10BaseTFD ;Force the driver to 10Mbps full duplex mode.
;100BaseTX ;Force the driver to 100Mbps half duplex mode.
;100BaseTXFD ;Force the driver to 100Mbps full duplex mode.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.