;----------------------------------------------------------------------------
;
; KTCCB4N4.INF NDIS4.0 configuration file for Windows NT 4.0
; Kingston EtheRx CardBus 10/100 Fast Ethernet adapter (KNE-CB4TX)
; 11/16/98 V2.00
;
;----------------------------------------------------------------------------
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
MCA
PCI
[Options]
KTC
[OptionsTextENG]
KTC = "Kingston EtheRx CardBus 10/100 Fast Ethernet adapter (KNE-CB4TX)"
[AllFileConstants]
GenericInfVersion = " V2.00"
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "Kingston"
DISABLEPCMCIASYS = "0" ; "1"
[FileConstants-KTC]
GenericAdapterName = "Kingston EtheRx CardBus 10/100 Fast Ethernet adapter"
GenericTitleName = "KNE-CB4TX CardBus PC Card"
GenericDriverName = "Kingston EtheRx CardBus 10/100 Fast Ethernet adapter"
GenericSysName = "KTCCB4N4.SYS"
GenericName = "KTCCB4N4"
ProductMajorVersion = "2"
ProductMinorVersion = "00"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "KTCCB4N4"
ProductSoftwareDesc = "Kingston EtheRx CardBus 10/100 Fast Ethernet adapter"
ProductSoftwarePath = "\SystemRoot\System32\drivers\"$(GenericSysName)
NetRuleSoftwareType = "ktccb4n4Sys ndisDriver ktccb4n4Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """ktccb4n4Sys"" yes no container"
NetRuleSoftwareClass = {"ktccb4n4Driver basic"}
NetRuleSoftwareBindable = {"ktccb4n4Driver ktccb4n4Adapter non exclusive 100"}
ProductHardwareName = "KTCCB4N4"
ProductHardwareDesc = "Kingston EtheRx CardBus 10/100 Fast Ethernet adapter"
NetRuleHardwareType = "KTCCB4N4 ktccb4n4Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"ktccb4n4Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
VERS1Manufacturer = "Kingston"
VERS1Product = "EtheRx CardBus 10/100 Fast Ethernet adapter"
VERS1Type = "KNECB4TX-10/100"
PCMCIA = 0
[GeneralConstants]
From = ""
To = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MaximumAllowed = 33554432
RegistryError = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExist = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
; Now is a list which contains { Sec From 1-1-1970, Year, Month, Day, Hour,
; Minute, Second }
Now = {} ? $(!LIBHANDLE) GetSystemDate
;---------------------------------------------------------------------------
; 1. Identify
;
; DESCRIPTION: To verify that this INF deals with the same type of options
; as we are choosing currently.
;
; INPUT: None
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Option Type (COMPUTER ...)
; $($R2): Diskette description
;---------------------------------------------------------------------------
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
; STATUS_NOTSUPPORTED
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;------------------------------------------------------------------------
; InstallOption:
;
; This section is shelled to by main installation processing
; or by NCPASHEL.INF during reconfig, removal, update, etc.
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;------------------------------------------------------------------------
[InstallOption]
set Status = STATUS_FAILED
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
Set !DebugOutputControl = 1
Debug-Output "OEMSETNT.INF: InstallOption"
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms AllFileConstants
read-syms FileConstants"-"$(Option)
read-syms DialogConstants$(!STF_LANGUAGE)"-"$(Option)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = $(OK)
endif
read-syms AllFileConstants$(!STF_LANGUAGE)
read-syms FileConstants$(!STF_LANGUAGE)"-"$(Option)
detect date
set-title $(FunctionTitle)
set To = Begin
set From = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
Set ActivateDetection = FALSE
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
set StartLabel = configureadapter
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set From = end
set To = end
goto nonfatalinfo
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
; Set the Default values
set IRQValue = *($(IRQList), 6) ; IRQ Level = 10
set IOBaseAddrValue = *($(IOBaseAddrList), 11) ; IOBase Address = 0x6000
set MemoryAddrValue = *($(MemoryAddrList), 17) ; Memory Address = 0xD0000
set TransmitBuffersValue = *($(TransmitBuffersList), 2) ; TransmitBuffers = 16
set ReceiveBuffersValue = *($(ReceiveBuffersList), 2) ; ReceiveBuffers = 16
Set From = $(fatal)
Set To = $(fatal)
Goto $(StartLabel)
;-----------------------------------------------
; Installation Section
;-----------------------------------------------
installadapter = +
; Check whether the same version of the software exists
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MaximumAllowed) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
; Same version already existed in the local machine
; Popup the dialog and ask the user whether he wants to continue
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
$(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
; Add a new adapter card?
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
goto end
endif
set OldVersionExist = $(TRUE)
endif
endif
; DLL load addition
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
install "Install-Dll"
goto adaptersetup
;-----------------------------------------------
; Configuration Section
;-----------------------------------------------
; Get the current values of all the parameters
configureadapter = +
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MaximumAllowed) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryError = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component product key"
goto fatalregistry
Endif
Endif
; Get the other parameters; they're attached to the service parameters key
Debug-Output "INF: Shelling to FindService"
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "INF: FindService shell failure"
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "INF: FindService Shell error: "$($R0)
Goto fatalregistry
endif
Set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryError = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "Cannot find component service"
goto fatalregistry
endif
set OldVersionExist = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
; Get the old values from the Registry [Get Values]
EnumRegValue $(KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "IoBaseAddress"
set IOBaseAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "MemoryMappedBaseAddress"
set MemoryAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "ReceiveBuffers"
set ReceiveBuffersIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "TransmitBuffers"
set TransmitBuffersIndex = $(ValueData)
endif
EndForListDo
set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex)))
ifstr(i) $(IRQValue) == ""
set IRQValue = *($(IRQList), 2)
endif
set MemoryAddrValue = *($(MemoryAddrList), ~($(MemoryAddrValues),$(MemoryAddrIndex)))
ifstr(i) $(MemoryAddrValue) == ""
set MemoryAddrValue = *($(MemoryAddrValues), 21)
endif
set IOBaseAddrValue = *($(IOBaseAddrList), ~($(IOBaseAddrValues),$(IOBaseAddrIndex)))
ifstr(i) $(IOBaseAddrValue) == ""
set IOBaseAddrValue = *($(IOBaseAddrList), 1)
endif
set ReceiveBuffersValue = *($(ReceiveBuffersList), ~($(ReceiveBuffersValues),$(ReceiveBuffersIndex)))
ifstr(i) $(ReceiveBuffersValue) == ""
set ReceiveBuffersValue = *($(ReceiveBuffersValues), 0)
endif
set TransmitBuffersValue = *($(TransmitBuffersList), ~($(TransmitBuffersValues),$(TransmitBuffersIndex)))
ifstr(i) $(TransmitBuffersValue) == ""
set TransmitBuffersValue = *($(TransmitBuffersValues), 0)
endif
adaptersetup = +
Set From = adapteroptions
adapteroptions = +
LoadLibrary "disk 1" $(DialogDllName) hLib
read-syms FileDependentDlg$(!STF_LANGUAGE)"-"$(Option)
set ENABLER = 0
ui start "InputDlg" $(hLib)
set ExitButton = $(ButtonPressed)
FreeLibrary $(hLib)
ifstr(i) $(DLGEVENT) == "CONTINUE"
set IOBaseAddrIndex = $(Combo1Out)
set MemoryAddrIndex = $(Combo2Out)
set IRQValueIndex = $(Combo3Out)
set ReceiveBuffersIndex = $(Combo4Out)
set TransmitBuffersIndex = $(Combo5Out)
set ExitButton = $(ButtonPressed)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
goto end
else
set CommonStatus = STATUS_USERCANCEL
ui pop 1
Debug-Output "Action: unknown. Bye."
goto end
endif
; If installing, go create the necessary keys;
; if configuring, they're already open.
skipoptions =+
ifint $(OldVersionExist) == $(TRUE)
ifstr(i) $(!NTN_InstallMode) == configure
goto writeparameters
endif
endif
StartWait
; Add Software Component
ifint $(OldVersionExist) == $(FALSE)
ifstr(i) $(!NTN_InstallMode) == "install"
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwarePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
; $R1 contains the product version key handle
; $R2 contains the NetRules subkey handle
; $R3 contains the new Services key handle
; $R4 contains the Parameters key
; $R5 contains the Linkage Key
set RegistryError = $($R0)
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $(RegistryError) != NO_ERROR
EndWait
Debug-Output "Registry error: add software components"
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDesc)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
EndWait
Debug-Output "Registry error: add value list."
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryError = $($R0)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $(RegistryError) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
goto fatalregistry
endif
endif
; Create the HARDWARE\Netcard region and its corresponding service
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Cannot add hardware component"
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
EndWait
Debug-Output "Registry error: add hardware component"
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDesc)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
EndWait
Debug-Output "Resgitry error: add value list."
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
goto writeparameters
; REQUIRED: $(KeyParameters) contains service Parameters key handle
writeparameters = +
Shell $(UtilityInf), GetBusTypeNum
set BusTypeNum = $($R1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
; Add the rest of the parameters to the Services area
Debug-Output "OEMSETNT.INF: - Create Driver Parameters"
set MemoryAddrValue = *($(MemoryAddrValues),~($(MemoryAddrList), $(MemoryAddrIndex)))
set IRQValue = *($(IRQValues), ~($(IRQList), $(IRQValueIndex)))
set IOBaseAddrValue = *($(IOBaseAddrValues),~($(IOBaseAddrList), $(IOBaseAddrIndex)))
set ReceiveBuffersValue = *($(ReceiveBuffersValues), ~($(ReceiveBuffersList), $(ReceiveBuffersIndex)))
set TransmitBuffersValue = *($(TransmitBuffersValues), ~($(TransmitBuffersList), $(TransmitBuffersIndex)))
set IOLengthValue = 128
set NewValueList = {{IoBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddrValue)},+
{IoLength, $(NoTitle),$(!REG_VT_DWORD), 128},+
{MemoryMappedBaseAddress, $(NoTitle),$(!REG_VT_DWORD),$(MemoryAddrValue)},+
{MemoryMappedSize, $(NoTitle),$(!REG_VT_DWORD),4096},+
{InterruptNumber, $(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{TransmitBuffers, $(NoTitle),$(!REG_VT_DWORD),$(TransmitBuffersValue)},+
{ReceiveBuffers, $(NoTitle),$(!REG_VT_DWORD),$(ReceiveBuffersValue)},+
{MediaType, $(NoTitle),$(!REG_VT_DWORD),1},+
{BusType, $(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{BusNumber, $(NoTitle),$(!REG_VT_DWORD),0},+
{AdapterType, $(NoTitle),$(!REG_VT_DWORD),0},+
{PCMCIA, $(NoTitle),$(!REG_VT_DWORD),0},+
{DriverType,$(NoTitle),$(!REG_VT_DWORD),1},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{NwayProtocol,$(NoTitle),$(!REG_VT_DWORD),1},+
{PlatformType,$(NoTitle),$(!REG_VT_DWORD),1}}
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
CloseRegKey $(KeyParameters)
ifint $(DISABLEPCMCIASYS) == 1
set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia"
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MaximumAllowed) PCMCIAKey
SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),4} ; '4' disables the driver
CloseRegKey $(PCMCIAKey)
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
Debug-Output "Registry error: Add value list"
goto fatalregistry
endif
EndWait
; ----------------------------------------------------------------------------------------------------------
; add driver info to the SYSTEM\CurrentControlSet\Services\resman\Database\Kingston for CardWizard
; ----------------------------------------------------------------------------------------------------------
Debug-Output "OEMSETNT.INF: Check the presence of CardWizard"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\resman" $(MaximumAllowed) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
goto successful
endif
Debug-Output "OEMSETNT.INF: Create Registry Keys for CardWizard"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\resman\Database\Kingston\KNE-CB4TX" $(MaximumAllowed) MyPcmciaHandle
Ifstr $(MyPcmciaHandle) == $(KeyNull)
Debug-Output "OEMSETNT.INF: Create Registry Keys (KNE-CB4TX)"
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\resman\Database" $(MaximumAllowed) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {"Kingston",0,GenericClass} "" $(MaximumAllowed) "" MyPcmcialHandle
CloseRegKey $(MyPcmciaKey)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\resman\Database\Kingston" $(MaximumAllowed) MyPcmciaKey
CreateRegKey $(MyPcmciaKey) {"KNE-CB4TX",0,GenericClass} "" $(MaximumAllowed) "" MyPcmcialHandle
CloseRegKey $(MyPcmciaKey)
OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\resman\Database\Kingston\KNE-CB4TX" $(MaximumAllowed) MyPcmciaHandle
endif
set NewValueList = {{Driver,$(NoTitle),$(!REG_VT_SZ),$(GenericName)}}
Shell $(UtilityInf), AddValueList, $(MyPcmciaHandle), $(NewValueList)
Debug-Output "<DBG> AddValueList - Driver:REG_SZ:KNE-CB4TX"
CloseRegKey $(MyPcmciaHandle)
goto successful
;-----------------------------------------------
; Binding section
;-----------------------------------------------
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
;-----------------------------------------------
; Removeadapter section
;-----------------------------------------------
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
; Remove Software Component
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
goto fatalregistry
endif
endif
ifint $(DISABLEPCMCIASYS) == 1
set PCMCIAKeyName = $(!NTN_ServiceBase)"\Pcmcia"
OpenRegKey $(!REG_H_LOCAL) "" $(PCMCIAKeyName) $(MaximumAllowed) PCMCIAKey
SetRegValue $(PCMCIAKey) {Start, 0, $(!REG_VT_DWORD),0} ; '0' restores the driver to "BOOT"
CloseRegKey $(PCMCIAKey)
endif
goto end
;-----------------------------------------------
; Upgrade Software section
;-----------------------------------------------
UpgradeSoftware = +
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MaximumAllowed) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
GetRegValue $(KeyProduct),"MajorVersion", VersionInfo
set Version = *($(VersionInfo), 4)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
ifstr(i) $(!UG_Filename) != ""
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
ifint $(Version) != $(ProductVersion)
; Do nothing for update
endif
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
else
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) +
$(MaximumAllowed) NetworkCardKey
Ifstr(i) $(NetworkCardKey) != $(KeyNull)
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
OpenRegKey $(NetworkCardKey) "" "NetRules" +
$(MaximumAllowed) NetRuleKey
Ifstr(i) $(NetRuleKey) != $(KeyNull)
; Make the change here
else
goto fatalregistry
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
else
goto fatalregistry
endif
OpenRegKey $(!REG_H_LOCAL) "" +
$(!NTN_ServiceBase)"\"$(ServiceName) +
$(MaximumAllowed) ServiceKey
Ifstr(i) $(ServiceKey) != $(KeyNull)
CloseRegKey $(ServiceKey)
else
goto fatalregistry
endif
endif
goto end
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set RegistryError = $($R0)
Ifstr(i) $(RegistryError) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(From)
else
goto "end"
endif
nonfatalinfo = +
Set Severity = STATUS
Set CommonStatus = STATUS_USERCANCEL
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(From)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryError)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[DebugConfiguration]
Set InfName = "OEMSETNT.INF"
return
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Dll]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "Kingston Setup Disk for NT"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, OEMSETNT.INF, SIZE=58000, RENAME=$(!UG_Filename)
[Files-Dll]
1, KTCCB4N4.DLL, SIZE=21000
[Files-KTC]
1, KTCCB4N4.SYS, SIZE=53000
[LanguagesSupported]
ENG
[AllFileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
DialogDllName = "KTCCB4N4.DLL"
[FileConstantsENG-KTC]
FunctionTitle = $(GenericTitleName)" Setup"$(GenericInfVersion)
ProductSoftwareTitle = $(GenericDriverName)
ProductHardwareTitle = $(GenericAdapterName)
IRQList = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
IOBaseAddrList = ^(IOBaseAddrChoices, 1)
IOBaseAddrValues = ^(IOBaseAddrChoices, 2)
MemoryAddrList = ^(MemoryAddrChoices,1)
MemoryAddrValues = ^(MemoryAddrChoices,2)
ReceiveBuffersList = ^(ReceiveBuffersChoices, 1)
ReceiveBuffersValues = ^(ReceiveBuffersChoices, 2)
TransmitBuffersList = ^(TransmitBuffersChoices, 1)
TransmitBuffersValues = ^(TransmitBuffersChoices, 2)
[DialogConstantsENG-KTC]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG-KTC]
DlgType = "RadioCombination"
DlgTemplate = "KTCCB4N4"
Caption = $(FunctionTitle)
HelpContext = $(!IDH_DB_OEMNADE2_INS)
CBOptionsGreyed = {}
NotifyFields = {NO, NO, NO, NO, NO}
Combo1Label = "I/O Port:"
Combo2Label = "Memory Address:"
Combo3Label = "Interrupt:"
Combo4Label = "Rx Buffers:"
Combo5Label = "Tx Buffers:"
Combo1List = $(IOBaseAddrList)
Combo1Out = $(IOBaseAddrValue)
Combo2List = $(MemoryAddrList)
Combo2Out = $(MemoryAddrValue)
Combo3List = $(IRQList)
Combo3Out = $(IRQValue)
Combo4List = $(ReceiveBuffersList)
Combo4Out = $(ReceiveBuffersValue)
Combo5List = $(TransmitBuffersList)
Combo5Out = $(TransmitBuffersValue)
ComboListItemsIn = {Combo1List,Combo2List,Combo3List, Combo4List, Combo5List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out}
EditTextIn = {"",""}
EditTextLim = {"",""}
[MemoryAddrChoices]
MA_1 = "0xC0000", 786432
MA_2 = "0xC1000", 790528
MA_3 = "0xC2000", 794624
MA_4 = "0xC3000", 798720
MA_5 = "0xC4000", 802816
MA_6 = "0xC5000", 806912
MA_7 = "0xC6000", 811008
MA_8 = "0xC7000", 815104
MA_9 = "0xC8000", 819200
MA_10 = "0xC9000", 823296
MA_11 = "0xCA000", 827392
MA_12 = "0xCB000", 831488
MA_13 = "0xCC000", 835584
MA_14 = "0xCD000", 839680
MA_15 = "0xCE000", 843776
MA_16 = "0xCF000", 847872
MA_17 = "0xD0000", 851968
MA_18 = "0xD1000", 856064
MA_19 = "0xD2000", 860160
MA_20 = "0xD3000", 864256
MA_21 = "0xD4000", 868352
MA_22 = "0xD5000", 872448
MA_23 = "0xD6000", 876544
MA_24 = "0xD7000", 880640
MA_25 = "0xD8000", 884736
MA_26 = "0xD9000", 888832
MA_27 = "0xDA000", 892928
MA_28 = "0xDB000", 897024
MA_29 = "0xDC000", 901120
MA_30 = "0xDD000", 905216
MA_31 = "0xDE000", 909312
MA_32 = "0xDF000", 913408
[IRQChoices]
IRQ_1 = "3",3
IRQ_2 = "4",4
IRQ_3 = "5",5
IRQ_4 = "7",7
IRQ_5 = "9",9
IRQ_6 = "10",10
IRQ_7 = "11",11
IRQ_8 = "15",15
[ReceiveBuffersChoices]
RXB_1 = "8", 8
RXB_2 = "16", 16
RXB_3 = "32", 32
RXB_4 = "48", 48
RXB_5 = "64", 64
[TransmitBuffersChoices]
TXB_1 = "8", 8
TXB_2 = "16", 16
TXB_3 = "32", 32
TXB_4 = "48", 48
TXB_5 = "64", 64
[IOBaseAddrChoices]
IOBase_1 = "0x1000",4096
IOBase_2 = "0x1800",6144
IOBase_3 = "0x2000",8192
IOBase_4 = "0x2800",10240
IOBase_5 = "0x3000",12288
IOBase_6 = "0x3800",14336
IOBase_7 = "0x4000",16384
IOBase_8 = "0x4800",18432
IOBase_9 = "0x5000",20480
IOBase_10 = "0x5800",22528
IOBase_11 = "0x6000",24576
IOBase_12 = "0x6800",26624
IOBase_13 = "0x7000",28672
IOBase_14 = "0x7800",30720
IOBase_15 = "0x8000",32768
IOBase_16 = "0x8800",34816
IOBase_17 = "0x9000",36864
IOBase_18 = "0x9800",38912
IOBase_19 = "0xA000",40960
IOBase_20 = "0xA800",43008
IOBase_21 = "0xB000",45056
IOBase_22 = "0xB800",47104
IOBase_23 = "0xC000",49152
IOBase_24 = "0xC800",51200
IOBase_25 = "0xD000",53248
IOBase_26 = "0xD800",55296
IOBase_27 = "0xE000",57344
IOBase_28 = "0xE800",59392
IOBase_29 = "0xF000",61440
IOBase_30 = "0xF800",63488
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.