1. 111_10qs.exe Driver
  2. OEMSETUP.INF File Contents

OEMSETUP.INF Driver File Contents (111_10qs.exe)

 DOWNLOAD NOW
OEMSETUP.INF Driver Update Utility 
;;-----------------------------------------------------
;;
;;OEMSETUP.INF for WinNT40 KTC111.SYS NDIS4 Driver
;;Kingston EtheRx KNE111TX PCI Fast Etherner Adapter
;;05/06/2000 v1.01a
;;
;;-----------------------------------------------------

	
[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    PCI
[Options]
    KTC111
[ConnectionChoicesPnic]
    Connect_0 = "AutoSense" , 0
    Connect_1 = "TP_10" , 1
    Connect_2 = "TP_10+FullDuplex" , 2
    Connect_3 = "TP_100" , 3
    Connect_4 = "TP_100+FullDuplex" , 4
;;  Connect_5 = "TP_100_T4" , 5
;;    Connect_6 = "BNC" , 6
;;  Connect_7 = "AUI" , 7
[TxThresholdChoicesPnic]
    TxThreshold_0 = "Store and Forward",0       
    TxThreshold_1 = "36 Bytes",1        
    TxThreshold_2 = "72 Bytes",2        
    TxThreshold_3 = "96 Bytes",3        
    TxThreshold_4 = "128 Bytes",4
    TxThreshold_5 = "160 Bytes",5       
    TxThreshold_6 = "256 Bytes",6       
[ConnectionChoicesPnicII]
    Connect_0 = "AutoSense" , 0
    Connect_1 = "TP_100+FullDuplex" , 1
    Connect_2 = "TP_100" , 2
    Connect_3 = "TP_10+FullDuplex" , 3
    Connect_4 = "TP_10" , 4
[TxThresholdChoicesPnicII]
    TxThreshold_0 = "Store and Forward",0       
    TxThreshold_1 = "128 Bytes",128     
    TxThreshold_2 = "256 Bytes",256     
    TxThreshold_3 = "512 Bytes",512     
    TxThreshold_4 = "1024 Bytes",1024   
[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "Vendor9"
ProductMajorVersion     = "4"
ProductMinorVersion     = "13"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)

ProductSoftwareName     = "KTC111"
ProductSoftwareTitle    = "Kingston EtherRX KNE111TX PCI Adapter Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\KTC111.sys"
NetRuleSoftwareType     = "KTC111Sys ndisDriver KTC111Driver"
NetRuleSoftwareUse        = $(SoftwareType)
NetRuleSoftwareBindForm = """KTC111Sys"" yes no container"
NetRuleSoftwareClass    = {"KTC111Driver basic"}
NetRuleSoftwareSWBindable = {"KTC111Driver KTC111Adapter non exclusive 100"}

OptionHelpFile = "KTC111.hlp"
ProductHardwareName = "KTC111"

;ProductHardwarePnicTitle = "Kingston EtherRX KNE110TX PCI Fast Ethernet Adapter"
ProductHardwarePnicIITitle = "Kingston EtherRX KNE111TX PCI Fast Ethernet Adapter"

NetRuleHardwareKTC111Type  = "KTC111 KTC111Adapter"
NetRuleHardwareKTC111Class = {"KTC111Adapter basic"}
AdapterKTC111Type = 5   ;; PCI board


HelpPnicId = 30
PnicCFID = 135597    ;; 0x000211ad
PnicDevID = 2        ;; 0x0002
PnicVenID = 4525     ;; 0x11AD
ConnectionPnicIndexDefault=0    ; AutoSense
TxThresholdPnicIndexDefault=6

HelpPnicIIId = 30
PnicIICFID = 3239383469    ;; 0xC11511AD
PnicIIDevID = 49429    ;; 0xC115
PnicIIVenID = 4525     ;; 0x11AD
ConnectionPnicIIIndexDefault=0    ; AutoSense
TxThresholdPnicIIIndexDefault=1024

NetRuleHardwareBindForm = " yes yes container"
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName    = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

[GeneralConstants]
from        = ""
to          = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull           = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct        = ""
KeyParameters   = ""
TRUE                = 1
FALSE             = 0
NoTitle                = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath        = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media        = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status          = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
	ifstr(i) $($1) == ""
	   goto returnoptions
	endif
	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
	    goto returnoptions
	else
	    set Status = STATUS_NOTSUPPORTED
	    goto finish_ReturnOptions
	endif
    else
	set Status = STATUS_NOLANGUAGE
	goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status           = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(Function$(MacID)Title) 
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
	set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
	set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
	set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
	Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	    Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    set Error = $($R0)
	    set from = end
	    set to = end
	    goto nonfatalinfo
	else
	    set StartLabel = configureadapter
	endif
    else
	set StartLabel = installadapter
	set OEM_ABANDON_OPTIONS = {}
	set OEM_ABANDON_SOFTWARE = FALSE
	set OEM_ABANDON_ON = TRUE
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	CloseRegKey $(KeyProduct)
	ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
	    Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+
		  $(ProductVersion)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    goto end
	else
	    Shell $(UtilityInf), CardExistedDlg
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    ifstr(i) $($R1) != "OK"
		set CommonStatus = STATUS_USERCANCEL
		goto end
	    endif
	    set OldVersionExisted = $(TRUE)
	endif
    Endif
    ifstr(i) $(DoCopy) == "YES"
	Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
	Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Goto ShellCodeError
	Else-Ifstr(i) $($R0) == STATUS_FAILED
	    Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    set Error = $($R0)
	    Goto fatal
	Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
	    Goto successful
	Endif
	Set SrcDir = $($R1)
	install "Install-Hlp"
    endif
    Goto installproduct
configureadapter = +
    Ifstr(i) $(KeyProduct) == $(KeyNull)
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
	Ifstr $(KeyProduct) == $(KeyNull)
	    Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	    Goto fatalregistry
	Endif
    Endif
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
	Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
	Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
	set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
	goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
	set ValueItem = $($)
	set ValueName = *($(ValueItem),1)
	set ValueData = *($(ValueItem),4)
;
; ONLY Support PnicII - KNE111TX adapter
;
	Ifstr(i) $(ValueName) == "AdapterCFID"
;	    Ifint $(ValueData) == $(PnicCFID)
;		set MacID = "Pnic"
;	    else
		set MacID = "PnicII"
;	    endif
	else-ifstr(i) $(ValueName) == "ConnectionType"
	    set ConnectionIndex = $(ValueData)
	else-ifstr(i) $(ValueName) == "TxThreshold"
	    set TxThresholdIndex = $(ValueData)
	endif
    EndForListDo
    read-syms FileOptionsDlg$(!STF_LANGUAGE)
    set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
    ifstr(i) $(ConnectionValue) == ""
	set ConnectionValue = *($(ConnectionList), 2)
    endif
    set TxThresholdValue = *($(TxThresholdList), ~($(TxThresholdValues),$(TxThresholdIndex)))
    ifstr(i) $(TxThresholdValue) == ""
	set TxThresholdValue = *($(TxThresholdList), 2)
    endif
adapteroptions = +
    set from = adapteroptions
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(MacID)Id)
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
	set ConnectionIndex = $(Combo1Out)
	set TxThresholdIndex = $(Combo2Out)
	ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
	set CommonStatus = STATUS_USERCANCEL
	ui pop 1
	goto end
    else
	set CommonStatus = STATUS_USERCANCEL
	ui pop 1
	goto end
    endif
    set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
    set TxThresholdValue = *($(TxThresholdValues), ~($(TxThresholdList),$(TxThresholdIndex)))
    ifstr(i) $(!NTN_InstallMode) == configure
	goto updateparameters
    endif
installproduct =+
    StartWait
    set AdapterList = {}
    Shell $(UtilityInf), GetPCIInformation, $(PnicVenID) $(PnicDevID)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R0) != {}
	ForListDo $($R0)
	    set AdapterList = >($(AdapterList), {$($), "Pnic"})
	EndForListDo
    endif
    Shell $(UtilityInf), GetPCIInformation, $(PnicIIVenID) $(PnicIIDevID)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R0) != {}
	ForListDo $($R0)
	    set AdapterList = >($(AdapterList), {$($), "PnicII"})
	EndForListDo
    endif
    ifstr(i) $(AdapterList) == {}
	set Error = $(CANNOT_FIND_ANY_CARD)
	set CommonStatus = USER_CANCEL
	set from = end
	goto nonfatal
    endif
    ifint $(OldVersionExisted) == $(FALSE)
	Ifstr(i) $(DoCopy) == "YES"
	    Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
	    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
		Goto ShellCodeError
	    Else-Ifstr(i) $($R0) == STATUS_FAILED
		Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
		    goto ShellCodeError
		endif
		set Error = $($R0)
		Goto fatal
	    Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
		Goto successful
	    Endif
	    Set SrcDir = $($R1)
	Endif
	install "Install-Option"
	ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	    Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    set Error = $($R0)
	    goto fatal
	endif
	Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareName), +
	    $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
	    $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
	    $(NetEventDLL)
	Set OEM_ABANDON_SOFTWARE = TRUE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    CloseRegKey $($R1)
	    CloseRegKey $($R2)
	    CloseRegKey $($R3)
	    CloseRegKey $($R4)
	    CloseRegKey $($R5)
	    goto fatalregistry
	endif
	Set SoftProductKey        = $($R1)
	Set SoftNetRuleKey        = $($R2)
	Set SoftServiceKey        = $($R3)
	Set SoftParameterKey      = $($R4)
	Set SoftLinkageKey        = $($R5)
	set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
			   {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
			   {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
			   {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
			   {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
			   {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
			   {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
	Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    CloseRegKey $(SoftProductKey)
	    CloseRegKey $(SoftNetRuleKey)
	    CloseRegKey $(SoftServiceKey)
	    CloseRegKey $(SoftParameterKey)
	    CloseRegKey $(SoftLinkageKey)
	    goto fatalregistry
	endif
	set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
			    {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
			    {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
			    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
			    {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
			    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
	Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	CloseRegKey $(SoftProductKey)
	CloseRegKey $(SoftNetRuleKey)
	CloseRegKey $(SoftServiceKey)
	CloseRegKey $(SoftParameterKey)
	CloseRegKey $(SoftLinkageKey)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	    EndWait
	    goto fatalregistry
	endif
    endif
    ForListDo $(AdapterList)
	set BusNum = *(*(($($),1),1)
	set DeviceNum = *(*($($),1),2)
	set FunctionNum = *(*($($),1),3)
	set MacID = *($($),2)
	Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
	    $(DeviceNum), $(ProductHardware$(MacID)Description), $(ProductHardwareName) "YES"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	ifstr $($R0) != "NO_ERROR"
	    set Error = $($R0)
	    goto fatal
	endif
	read-syms FileOptionsDlg$(!STF_LANGUAGE)
	set ConnectionIndex = $(Connection$(MacID)IndexDefault)
	set TxThresholdIndex = $(TxThreshold$(MacID)IndexDefault)
	set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
	set TxThresholdValue = *($(TxThresholdList), ~($(TxThresholdValues),$(TxThresholdIndex)))
	ifstr(i) $($R1) != "YES"
	    read-syms FileDependentDlg$(!STF_LANGUAGE)
	    SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(MacID)Id)
	    ui start "InputDlg"
	    ifstr(i) $(DLGEVENT) == "CONTINUE"
		set ConnectionIndex = $(Combo1Out)
		set TxThresholdIndex = $(Combo2Out)
		ui pop 1
	    else-ifstr(i) $(DLGEVENT) == "BACK"
		set CommonStatus = STATUS_USERCANCEL
		ui pop 1
		goto end
	    else
		set CommonStatus = STATUS_USERCANCEL
		ui pop 1
		goto end
	    endif
	    set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
	    set TxThresholdValue = *($(TxThresholdValues), ~($(TxThresholdList),$(TxThresholdIndex)))
	    Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
	    ifint $($R4) != -1
		Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
	    endif
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    set RegistryErrorIndex = $($R0)
	    Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
		EndWait
		CloseRegKey $($R1)
		CloseRegKey $($R2)
		CloseRegKey $($R3)
		goto fatalregistry
	    endif
	    Set HardNetCardKey        = $($R1)
	    Set HardNetRuleKey        = $($R2)
	    Set HardParameterKey      = $($R3)
	    set AdapterNumber         = $($R4)
	    ifstr(i) $(MacID) == "Pnic"                 
	    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
				{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(MacID)Title)},+
				{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(MacID)Description)},+
				{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
				{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
				{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
	    endif
	    ifstr(i) $(MacID) == "PnicII"                       
	    set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
				{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(MacID)Title)},+
				{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(MacID)Description)},+
				{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
				{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
				{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
	    endif       

	    Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    set BusTypeNum = 5
	    set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
				{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
				{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),1},+
				{TxThreshold,$(NoTitle),$(!REG_VT_DWORD),1},+
				{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
				{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$($(MacID)CFID)}}
	    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)},+
				{TxThreshold,$(NoTitle),$(!REG_VT_DWORD),$(TxThresholdValue)}}
	    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
	    set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
	    set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
				{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
				{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
				{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
	    Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
	    ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	    endif
	    CloseRegKey $(HardNetCardKey)
	    CloseRegKey $(HardNetRuleKey)
	    set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
				{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
				{FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
	    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
	    CloseRegKey $(HardParameterKey)
	endif
    EndForListDo
    EndWait
    goto successful
updateparameters =+
    set HardParameterKey    = $($R3)
    set NewValueList = {{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)},+
			{TxThreshold,$(NoTitle),$(!REG_VT_DWORD),$(TxThresholdValue)}}
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    CloseRegKey $(KeyParameters)
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    else
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $(!NTN_RegBase)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end
UpgradeSoftware = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
	Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    Debug-Output "ShellCode error"
	    goto ShellCodeError
	endif
	set !UG_Filename = $($R0)
	install "Install-Update"
	ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
	    goto fatal
	endif
	SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
	SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
	CloseRegKey $(KeyProduct)
    else
	goto fatalregistry
    endif
    goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
	Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), $($)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	    $(ProductSoftwareName), FALSE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
	    goto fatalregistry
	endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
	goto $(from)
    else
	goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
	Set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
	goto $(from)
    else
	goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
	    goto ShellCodeError
	endif
	set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType        = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
	AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
	set !STF_NCPA_FLUSH_COPYLIST = TRUE
	CopyFilesInCopyList
    endif
    Exit
[Install-Hlp]
    set STF_VITAL = ""
    AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    Exit
[Install-Update]
    set STF_VITAL          = ""
    set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
    AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    exit
[Source Media Descriptions]
    1  = "Kingston EtherRx KNE111TX Fast Ethernet Adapter Driver Disk"
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
[Files-Inf]
1,Oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)
[Files-KTC111]
1,KTC111.SYS , SIZE=999,  RENAME=KTC111.sys
[Files-Hlp]
1,KTC111.hlp , SIZE=999,  RENAME=KTC111.hlp
[LanguagesSupported]
    ENG
[OptionsTextENG]
    KTC111  = "Kingston EtherRx KNE111TX PCI Fast Ethernet Adapter"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
		 "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSoftwareDescription = "Kingston EtherRX KNE111TX PCI Fast Ethernet Driver"
;FunctionPnicTitle = "Kingston EtherRx KNE110TX PCI Fast Ethernet Adapter Setup"
FunctionPnicIITitle = "Kingston EtherRx KNE111TX PCI Fast Ethernet Adapter Setup"
;ProductHardwarePnicDescription = "Kingston EtherRx KNE110TX PCI Fast Ethernet Adapter"
ProductHardwarePnicIIDescription = "Kingston EtherRx KNE111TX PCI Fast Ethernet Adapter"

NoList  = ^(NoChoices, 2)
NoValues = ^(NoChoices, 4)
ShellCodeErrorTitle     = "Error: "$(Function$(MacID)Title)
ShellCodeErrorText        = "Shell Code Error."
CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"
[DialogConstantsENG]
Help          = "&Help"
Exit          = "Cancel"
OK            = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel        = "Cancel"
[FileOptionsDlgENG]
ConnectionList  = ^(ConnectionChoices$(MacID), 1)
ConnectionValues = ^(ConnectionChoices$(MacID), 2)
TxThresholdList  = ^(TxThresholdChoices$(MacID), 1)
TxThresholdValues = ^(TxThresholdChoices$(MacID), 2)
[FileDependentDlgENG]
DlgText = "Choose the proper cable type for the "+
	  "network adapter. Select [Help] for a detailled "+
	  "description of the available options of the list."
DlgTemplate = "TWO_COMBO"
DlgType = "Combination"
Caption = $(Function$(MacID)Title)
Combo1Label = "&ConnectionType:"
Combo1List = $(ConnectionList)
Combo1Out  = $(ConnectionValue)
Combo2Label = "&TxThreshold:"
Combo2List = $(TxThresholdList)
Combo2Out  = $(TxThresholdValue)

ComboListItemsIn  = {Combo1List,Combo2List}
ComboListItemsOut = {Combo1Out,Combo2Out}

EditTextLim = ""
CBOptionsGreyed = {}
MinHelpId = 10
MaxHelpId = 1140
HelpContext = $(Help$(MacID)Id)


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2026 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web5, load: 2.77