1. iR1024MFDriversV290W64EN.exe Driver
2. Readme_UFRIILT.txt File Contents

Readme_UFRIILT.txt Driver File Contents (iR1024MFDriversV290W64EN.exe)

Canon UFR II Printer Driver - Version 2.90  
for Microsoft Windows XP/Server 2003/Vista/Server 2008/7 x64 Edition

CANON SOFTWARE LICENSE AGREEMENT

IMPORTANT!

This is a legal agreement ("Agreement") between you and Canon Inc. 
("Canon") and governing your use of Canon's software programs 
including the related manuals or any printed material thereof (the 
"Software") for certain Canon's copying machines, printers and 
multifunctional peripherals (the "Products").

READ CAREFULLY AND UNDERSTAND ALL OF THE RIGHTS AND RESTRICTIONS 
DESCRIBED IN THIS AGREEMENT BEFORE INSTALLING THE SOFTWARE. BY 
CLICKING THE BUTTON INDICATING YOUR ACCEPTANCE AS STATED BELOW OR 
INSTALLING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS AND 
CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE FOLLOWING 
TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT USE THE SOFTWARE. NO 
REFUND WILL BE MADE BECAUSE THE SOFTWARE WAS PROVIDED TO YOU AT NO 
CHARGE.

1. GRANT OF LICENSE

Canon grants you a personal, limited and non-exclusive license to use 
("use" as used herein shall include storing, loading, installing, 
accessing, executing or displaying) the Software solely for the use 
with Products only on computers directly or via network connected to 
the Products (the "Designated Computer").

You may allow other users of other computers connected to your 
Designated Computer to use the Software, provided that you must assure 
that all such users shall abide by the terms of this Agreement and 
shall be subject to restrictions and obligations borne by you 
hereunder.

You may make one copy of the Software solely for a back-up purpose.

2. RESTRICTIONS

You shall not use the Software except as expressly granted or 
permitted herein, and shall not assign, sublicense, sell, rent, lease, 
loan, convey or transfer to any third party the Software. You shall 
not alter, translate or convert to another programming language, 
modify, disassemble, decompile or otherwise reverse engineer the 
Software and you shall not have any third party to do so.

3. COPYRIGHT NOTICE

You shall not modify, remove or delete any copyright notice of Canon 
or its licensors contained in the Software, including any copy thereof.

4. OWNERSHIP

Canon and its licensors retain in all respects the title, ownership 
and intellectual property rights in and to the Software. Except as 
expressly provided herein, no license or right, express or implied, is 
hereby conveyed or granted by Canon to you for any intellectual 
property of Canon and its licensors.

5. EXPORT RESTRICTION

You agree to comply with all export laws and restrictions and 
regulations of the country involved, and not to export or re-export, 
directly or indirectly, the Software in violation of any such laws, 
restrictions and regulations, or without all necessary approvals.

6. NO SUPPORT

NEITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS, 
OR DEALERS NOR CANON'S LICENSORS ARE RESPONSIBLE FOR MAINTAINING OR 
HELPING YOU TO USE THE SOFTWARE. NO UPDATES, FIXES OR SUPPORTS WILL BE 
MADE AVAILABLE FOR THE SOFTWARE.

7. NO WARRANTY AND DISCLAIMER OF INDEMNITY

[NO WARRANTY] THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY 
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE 
SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME 
THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME 
STATES OR LEGAL JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED 
WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU. 

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE 
OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR JURISDICTION TO 
JURISDICTION.

NEITHER CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS, 
OR DEALERS NOR CANON'S LICENSORS WARRANT THAT THE FUNCTIONS CONTAINED 
IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION OF 
THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR FREE.

[NO LIABILITY FOR DAMAGES] IN NO EVENT SHALL EITHER CANON, CANON'S 
SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS DEALERS OR CANON'S 
LICENSORS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT 
LIMITATION, LOSS OF BUSINESS PROFITS, LOSS OF BUSINESS INFORMATION, 
LOSS OF BUSINESS INTERRUPTION OR OTHER COMPENSATORY, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES) ARISING OUT OF THE SOFTWARE, USE THEREOF OR 
INABILITY TO USE THE SOFTWARE EVEN IF EITHER CANON, CANON'S 
SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS, DEALERS OR CANON'S 
LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME 
STATES OR LEGAL JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION 
OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR PERSONAL 
INJURY OR DEATH RESULTING FROM NEGLIGENCE ON THE PART OF SELLER, SO 
THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

[RELEASE OF LIABILITY] TO THE FULL EXTENT PERMITTED BY APPLICABLE LAW, 
YOU HEREBY RELEASE CANON, CANON'S SUBSIDIARIES AND AFFILIATES, THEIR 
DISTRIBUTORS, DEALERS AND CANON'S LICENSORS FROM ANY AND ALL LIABILITY 
ARISING FROM OR RELATED TO ALL CLAIMS CONCERNING THE SOFTWARE OR ITS 
USE.

8. TERM

This Agreement is effective upon your acceptance hereof by clicking 
the button indicating your acceptance as stated below or installing 
the Software and remains in effect until terminated. You may terminate 
this Agreement by destroying the Software including any and all copies 
thereof. 

This Agreement shall also terminate if you fail to comply with any 
terms hereof. Upon termination of this Agreement, in addition to Canon 
enforcing its respective legal rights, you must then promptly destroy 
the Software including any and all copies thereof. Notwithstanding the 
foregoing, Sections 4, and 7 through 11 shall survive any termination 
of this Agreement.

9. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE

The Software is a "commercial item," as that term is defined at 48 
C.F.R. 2.101 (October 1995), consisting of "commercial computer 
software" and "commercial computer software documentation," as such 
terms are used in 48 C.F.R. 12.212 (September 1995). Consistent with 
48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 
1995), all U.S. Government End Users shall acquire the Software with 
only those rights set forth herein. Manufacturer is Canon Inc./30-2, 
Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan.

10. SEVERABILITY

In the event that any section hereof is declared or found to be 
illegal by any court or tribunal of competent jurisdiction, such 
section shall be null and void with respect to the jurisdiction of 
that court or tribunal and all the remaining provisions hereof shall 
remain in full force and effect.

11. ACKNOWLEDGEMENT

BY CLICKING THE BUTTON INDICATING YOUR ACCEPTANCE AS STATED BELOW OR 
INSTALLING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS 
AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS AND 
CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND 
EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE 
SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, 
VERBAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND CANON 
RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT 
SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORISED REPRESENTATIVE 
OF CANON.

Should you have any questions concerning this Agreement, or if you 
desire to contact Canon for any reason, please write to Canon's sales 
subsidiary or distributor/dealer, serving the country where you 
obtained the Products.

 

This README file contains supplemental information to help you install 
and use your UFR II printer driver software with Microsoft Windows XP, 
Windows Server 2003, Windows Vista, Windows Server 2008, and Windows 7 
x64 Edition.

As with most software and hardware products, some information is made 
available after the development of the manual. Updated information 
regarding this driver software is provided in this README file. If you 
require additional assistance, please contact your local Canon company.

This software is based in part on the work of Independent JPEG group.

Windows and Windows Vista are trademarks of Microsoft Corporation in 
the United States and other countries.

Citrix, XenApp, and XenDesktop are trademarks of Citrix Systems, Inc. 
in the United States and other countries.

Other product and company names herein may be the trademarks of their 
respective owners.

CONTENTS

Overview

System Requirements

Installing the Printer Driver

Accessing the Properties Dialog Box

Accessing Help Information

Cautions, Limitations and Restrictions

Overview

This printer driver allows you to print documents from any Windows XP, 
Windows Server 2003, Windows Vista, Windows Server 2008, or Windows 7 
x64 Edition application to your printer.

NOTE

This driver supports the Canon Driver Configuration Tool. You can 
change the factory default settings of the printer driver to create 
customized driver sets using the Canon Driver Configuration Tool. For 
detailed information about this utility, refer to the Canon Driver 
Configuration Tool User's Guide.

System Requirements

The Canon UFR II Printer Driver can be used in the following system 
environments:

Operating System Software

Microsoft Windows XP Professional x64 Edition

Microsoft Windows Server 2003, Enterprise x64 Edition

Microsoft Windows Server 2003, Standard x64 Edition

Microsoft Windows Vista x64 Edition

Microsoft Windows Server 2008 x64 Edition

Microsoft Windows 7 x64 Edition

With Server-Based Computing Environment

Compatible Windows Terminal Server (Service)

Microsoft Windows Server 2003

Microsoft Windows Server 2008

Microsoft Windows Server 2008 R2

Compatible Software

Citrix Presentation Server 4.5

Citrix XenApp 5.0

Citrix XenDesktop 2.0

Citrix XenDesktop 2.1

Citrix XenDesktop 3.0

Citrix XenDesktop 4.0

Citrix XenDesktop 5.0

Compatible Microsoft Failover Cluster (MSFC)

Microsoft Windows Server 2003 Enterprise Edition

Microsoft Windows Server 2008 Enterprise Edition

Computer

Any computer which runs the above operating system software properly.

However, at least one of the following output ports is required:

network interface

USB port

The network interface is recommended for the highest quality printing 
throughput.

Installing the Printer Driver

To use this printer driver with software applications that operate 
with Microsoft Windows XP/Server 2003/Vista/Server 2008/7 x64 Edition, 
use the following installation procedure.

NOTE

If you log on Windows XP/Server 2003 x64 Edition as a Power User and 
run the installer, the installation may not be completed correctly. In 
this case, log in as an Administrator, and then retry the installation.

If a message prompting you to restart your computer is displayed when 
using the installer, make sure to restart your computer. If you do not 
restart your computer, existing drivers may not operate correctly.

To install using the Installer:

1. In the \UFRII\uk_eng\x64 folder, double-click the Setup.exe icon to 
start the installation process.

2. In the first dialog box of the Printer Driver Setup Wizard, click 
the Next button, and then follow the instructions on the screen.

3. Select Manually Set Port to Install, and then click the Next button.

4. If the dialog box to select items to install is displayed, select 
UFR II Printer Driver and click the Next button.

5. If the dialog box to select how to execute the setup is displayed, 
select Add Printers, or Add Printers and Update Drivers and click the 
Next button.

6. Select the driver you want to install from Printer List and click 
the Add button.

7. Check that the driver you want to install is selected in the 
Printer Driver Setup Wizard dialog box. Then click the Next button.

8. Select a Port from drop-down menu or by clicking the Add Port 
button. Then click the Next button.

9. In the next dialog box, check the installation settings, and then 
click the Start button.

10. After the files are copied, click the Next button.

11. Click the Exit button to finish the installation program.

You are now ready to print from any Windows software application.

NOTE

You can add a new driver without affecting existing driver if you 
select Add Printers for step 6. If you select Add Printers and Update 
Drivers, all existing drivers are updated automatically when you add a 
new driver.

If you are using a shared printer in the Print Server (Point and 
Print) environment, it is necessary to install Canon Driver 
Information Assist Service in the server PC in order to set up the 
printer configuration automatically or to use the Department ID 
Management feature.

If you are using an operating system equipped with Windows Firewall, a 
message which asks if you want to change the Windows Firewall setting 
is displayed during the installation.

If you select Yes, Windows Firewall will be configured to unblock the 
connection for Canon Driver Information Assist Service, so that you 
can set up the printer configuration automatically or use the 
Department ID Management feature.

If you select No, you cannot use Canon Driver Information Assist 
Service.

To install using the Add Printer Wizard:

1. Click the Start button, point to Settings, and then click Printers.

If you are using Windows XP Professional/Server 2003, on the Start 
menu, click Printers and Faxes.

If you are using Windows Vista/Server 2008, on the Start menu, click 
Control Panel, and then Printers.

If you are using Windows 7, on the Start menu, click Devices and 
Printers.

2. In the Printers folder, double-click the Add Printer icon (Windows 
XP/Server 2003) or click Add a printer (Windows Vista/Server 2008/7) 
to start the Add Printer Wizard.

3. Confirm the Wizard is started, and then click the Next button.

4. Follow the instructions on the screen to continue with the 
installation.

5. Click the Have Disk button.

6. Click the Browse button to select the following folder, and then 
click the OK button.

\UFRII\uk_eng\x64\Driver

7. Select your printer model from Printers, and then click the Next 
button.

8. Follow the instructions on the screen to continue, and then click 
the Finish button to start copying the files.

You are now ready to print from any Windows software application.

To install using a USB connection:

You can print in a USB environment. Install the printer driver through 
a USB connection.

1. In the \UFRII\uk_eng\x64 folder, double-click the Setup.exe icon to 
start the installation process.

2. In the first dialog box of the Printer Driver Setup Wizard, click 
the Next button, and then follow the instructions on the screen.

3. Select Install with USB Connection, and then click the Next button.

4. Click the Yes button in the message box asking if you want to start 
the installation.

5. When a dialog box prompts, connect the USB plug, and then turn the 
printer on.

6. After the files are copied, click the Next button.

7. Click the Exit button to finish the installation program.

Accessing the Properties Dialog Box

The Properties dialog box contains several sheets that allow you to 
setup and control your printer. To access the Properties dialog box, 
use the following procedures:

To access from the Desktop:

1. Click the Start button, point to Settings, and then click Printers.

If you are using Windows XP Professional/Server 2003, on the Start 
menu, click Printers and Faxes.

If you are using Windows Vista/Server 2008, on the Start menu, click 
Control Panel, and then Printers.

If you are using Windows 7, on the Start menu, click Devices and 
Printers.

2. Right-click the printer icon for your printer in the Printers 
folder, and then click Properties (Windows 2000/XP/Server 
2003/Vista/Server 2008) or Printer properties (Windows 7) to open the 
Printer Properties dialog box, or click Printing Preferences (Printing 
preferences) to open the Document Properties dialog box.

To access from within an application:

1. Click the Print command to display the Print dialog box.

2. Select your printer name from the drop-down list box, and then 
click the Properties button.

Accessing Help Information

From the Properties dialog box, you can click the Help button to 
display the information about the UFR II printer driver.

Cautions, Limitations and Restrictions

1. When using the collate function of the application and Saddle 
Stitch is specified for Booklet Printing, all paper will be sorted and 
saddle stitched. When using Saddle Stitch function for Booklet 
Printing, disable the collate function of the application.

2. When creating a custom paper size in the Print Server Properties 
dialog box, specify the margins as follows:

0.50cm/0.20in or more

3. When installing with Add Printer from the Printer Folder, the 
Cannot find Digital Signature message may appear. If this message 
appears, continue with the installation. The printer will install 
correctly.

4. When you select Paper Type for Select by in the Paper Source sheet, 
select Same Paper for All Pages for Paper Selection if you want to use 
Tab Paper to print a document. If you specify several different paper 
types to print each pages of a document, the print out on the Tab 
Paper may not be correct.

5. When printing from QuarkXPress, the document may not be printed and 
blank pages are output. In this case, select Disabled for Spooling at 
Host in the Device Settings sheet.

6. When printing a document to which EPS objects are attached, the 
printed output may not be correct.

7. It is necessary to use TCP/IP as a network protocol in order to set 
up the printer configuration automatically when using a Remote Desktop 
environment, or when Windows is shared by multiple users.

8. When inserting inserted sheets into the document, if you 
accidentally specify a drawer that contains tab paper as the paper 
source for the inserted sheets, the paper source automatically returns 
to the plain paper setting.

9. When you use Adobe Illustrator 9.0 or later and do not select the 
Bitmap Printing option, it may take a long time to finish printing, or 
thin lines or characters may be blurred. If you experience such 
problem, select the Bitmap Printing option.

10. If you print a document on a PC with a slow processing speed, it 
may take a long time to finish printing.

11. When you select Disabled for Spooling at Host in the Device 
Settings sheet, specify a cassette as a paper source for booklet 
printing.

12. If you select Transparency or Label for Paper Type in the Paper 
Source sheet, a message indicating that you cannot print the document 
unless you change the Paper Type may appear. If this message appears, 
you may be able to print a document by deselecting the Offset check 
box in the Finishing sheet.

13. There may be cases where the Custom Paper Type information 
registered in the printer is not acquired correctly when installing 
the printer driver. 
If so, reacquire the correct information by clicking on the Get Device 
Status button in the Device Settings sheet, or the Get Paper Details 
button in the Paper Type Settings dialog box, displayed by clicking 
the Settings button in the Paper Source sheet.

14. When an "@" character is used in the name of the printer, the 
printer will become unrecognizable by the operating system because of 
an invalid printer name thus disabling printing, operation and setup.

15. If you print a document that has an odd number of pages as a two-
sided document from an application, the application may automatically 
insert a blank page to bring the number of pages up to an even number. 
When this happens, the blank page inserted by the application is 
counted up in the same way as a printed page.

16. To register the custom paper size you want to use, access the 
Document Properties dialog box from the Printers folder with 
Administrator privileges, and then specify the paper size in the 
Custom Paper Size Settings dialog box which is displayed by clicking 
the Custom Paper Size button in the Page Setup sheet.

17. When you log on to an Administrator account that is different from 
the one used to install the software, you will not be able to access 
the driver properties with Administrator privileges. To access the 
driver properties, select [Run as Administrator].

18. In certain applications, thickness of a line can be set to a value 
smaller than 1pt but the actual thickness in the printout may be 
equivalent to that of an 1pt line.

19. When a document is output at a resolution of 1200 dpi set from an 
application, jaggies in images may be more noticeable than when the 
document is printed at 600 dpi.

20. If you are using a USB connection with the printer to print, and 
cancel a print job that is currently printing from your computer using 
the print spooler, the printer may not return to a ready state. In 
this state, you can print via USB, but not via a network. In order to 
be able to print from a network, cancel the print job from the control 
panel of the printer prior to printing.

21. For Windows Server 2008 x64 installed with Server Core option, the 
following limitations exist on using the printer driver.

You cannot install the driver with the installer. Use the installation 
options of Windows.

Some print options are not available under local environment or 
Windows Remote Desktop environment.

22. If the driver version of the client computer is older than that of 
the print server, the driver settings of the server may not be applied 
to the client.

23. If you are using a printer (AutoCreatedPrinter) created with the 
"Auto Created Client Printer" function of Citrix XenDesktop, you may 
not be able to use the Department ID Management function or the Get 
Device Status function. 
If this is the case, use the Citrix XenDesktop Universal Printer 
Driver (UPD), or select a Standard TCP/IP Port for which the IP 
address of a printer you are actually outputting to has been set.

*** If you are using the Universal Printer Driver, you may not be able 
to use some printer functions correctly, depending on the environment 
you are using. For a detailed solution, see the next item.

24. If you are using the Citrix XenApp (Presentation Server) or Citrix 
XenDesktop Universal Printer Driver (UPD), you may not be able to use 
the Department ID Management function, Get Device Status function, 
and/or Edit + Preview function, and print settings such as page layout, 
booklet printing, etc. may be invalid. 
If this is the case, with Citrix XenApp (Presentation Server) or 
Citrix XenDesktop in a disconnected state, deselect [Enable advanced 
printing features] in the [Advanced] sheet of the printer properties 
dialog box of the client printer, then connect Citrix XenApp 
(Presentation Server) or Citrix XenDesktop.

*** Depending on the environment you are using, you may not be able to 
perform the above operations in the way described. If this is the case, 
refer to the Citrix website. 
http://support.citrix.com/article/CTX115553

25. If you have installed a printer driver older than version 2.80 for 
use with one of the printer models below, and perform an update 
installation of this printer driver, [Enable bidirectional support] is 
not selected in the [Ports] tab of the printer properties dialog box. 
This may result in job cancelation in the print spooler not operating 
correctly. If this occurs, enable bidirectional support by selecting 
[Enable bidirectional support].

iR2016, iR2018, iR2020, iR2022/2025/2030, MF7100 Series, and 
LC800/L3000

26. The default setting for [Print Style] for some printers that 
support two-sided printing is [2-sided Printing].

 

Copyright CANON INC. 2011