Kingston Technology Corporation
INSTALLATION GUIDE
IBM LAN Server NIF and support files
for Kingston KNE2000 Ethernet Adapter Family
Copyright (c) 1995 Kingston Technology Corporation.
All rights reserved.
This installation guide provides the following information:
Installation and Configuration Information for IBM's LAN Adapter
Protocol Support (LAPS).
Driver Installation Procedure
1. Run LAPS.exe either from the floppy or Hard Drive
2. Choose install if this is a new installation and copy all files
to the hard drive.
OR
3. Choose the Install button from the bottom of the main menu
4. Insert the Kingston Drivers disk into A: drive when prompted
5. Change directories to A:\LAPS or B:\LAPS
6. The driver will be automatically copied to the hard drive
7. From the Main menu choose configuration.
8. Choose "Configure LAN Transports" from the Configuration window.
9. Click on continue
10. From the Network adapters menu choose the "Kingston KNE20XX ISA
Ethernet Adapter"
11. Select Add
12. Highlight the Kingston board in the Current configuration menu.
13. Click on the edit button
14. Select the proper Interrupt Level, I/O Base Address, DMA Channel.
These values can be obtained form the AUTOSET program on the
Kingston disk . The Network Adapter Address should be left blank
unless specified by the Network Administrator.
15. Choose OK
16. From the Configuration Workstation menu click on OK.
17. From the Main menu choose exit.
18. From the CONFIG.SYS UPDATE window Select. Click on EXIT if the
Drive specification is correct, if not select configure and
choose the correct drive.
19. After Exiting reboot the machine and the new driver will be loaded.
Trouble Shooting Guide
1. When loading the driver an initialization error appears,
ensure that the card settings match the settings in the protocol.ini.
Kingston Technology is a Registered Trademark of Kingston Technology
Corporation. All Trademarks and Registered Trademarks are the property
of their respective holders.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.