\UTILITY\WPCONFIG\READ1ST.TXT
Kingston Technology Company
WPCONFIG Utility
for
Fast EtheRx 10/100TX Print Server
Version 1.0, January 06, 1999
Copyright (C) 1999 Kingston Technology Company.
All rights reserved.
================================================================
This Print Server Configuration utilities contains the
following files:
SETUP.EXE
SETUP.LGO
SETUP.INS
SETUP.PKG
NEUTRAL.Z
README.TXT
SETUP.EXE -
This is the setup program for the Print Server's Windows based
configuration utility - WPCONFIG.
README.TXT -
This file.
================================================================
Installation Guide for Print Server WPCONFIG
1.0 What is WPCONFIG
2.0 Before installing WPCONFIG
2.1 On Windows NT workstation
2.2 On Windows 95 workstation
2.3 On Windows 3.1 & Windows for Workgroup workstation
3.0 Installing Print Server WPCONFIG utility
3.1 On windows 3.1, Windows for Workgroup & NT workstation
3.2 On Windows 95 workstation
4.0 Technical Support
================================================================
1.0 WHAT IS WPCONFIG?
WPCONFIG is a Windows based utility program designed for the
network administrator to remotely configure and manage Kingston's
Print Server products. WPCONFIG can be used on Microsoft's
Windows 3.1, Windows for Workgroups, Windows 95, and Windows NT
platforms. WPCONFIG uses IPX/SPX protocol to communicate with
the active Print Server devices.
================================================================
2.0 BEFORE INSTALLING WPCONFIG
Before you install WPCONFIG program on your workstation, you must
make sure that the following software has been loaded:
2.1 ON WINDOWS NT WORKSTATIONS
Click on control panel and then click on network icon to
bring up your network setup menu. Check to see if the
following software has been installed on your workstation:
1) NetWare Gateway Service (for NT version 3.5.1)
Client Service for NetWare (for NT version 3.5)
2) NWLINK IPX/SPX Compatible Transport
If not, then you need to select "Add software" function to
install these two software. After you install the software,
you need to restart the workstation. If you are prompted
with "Select Preferred server for NetWare" message, simply
click "Cancel" if you do not have a Novell server on your
network. You do not need to log in to a Novell file server
to use the WPCONFIG program.
2.2 ON WINDOWS 95 WORKSTATIONS
Click on control panel and then click on network icon to
bring up your network setup menu. Make sure that the
"Client for NetWare Network" & "IPX/SPX Compatible Transport"
are both installed. If not, then you need to click on Add
button to install these software. You do not need to setup
a Novell's preferred server or log in to an existing Novell
file server to use the WPCONFIG program.
2.3 ON WINDOWS 3.1 OR WINDOWS FOR WORKGROUPS WORKSTATIONS
Make sure that the Novell workstation drivers are properly
loaded on your workstation. You do not have to log in to a
Novell file server to use WPCONFIG program.
================================================================
3.0 INSTALLING WPCONFIG
3.1 To install WPCONFIG on your Windows 3.1, Windows for
Workgroups, or Windows NT workstation:
1) Insert "QStart CD-ROM" into your CD-ROM drive.
2) Make sure Windows is already running. If not, type WIN
at the DOS prompt.
3) Choose Run from the File menu in the Program Manager.
The Run dialog box appears.
4) Type letter:\Utility\Wpconfig\setup depending on which
letter you used for your CD-ROM.Click OK to start the
setup.
5) Follow the instructions on your screen.
3.2 To install WPCONFIG on your Windows 95 workstation:
1) Insert "QStart CD-ROM" into your CD-ROM drive.
2) Click Start, point to Run, then click.
3) Type the drive letter containing the "QStart CD-ROM",
followed by :\setup. For example F:\setup. Click OK
to start the installation.
4) Follow the instructions on your screen.
================================================================
4.0 TECHNICAL SUPPORT INFORMATION
Accessing the Kingston BBS for the Latest Information
The Kingston BBS can be accessed by using a modem and a
communications program to call the BBS at 714-435-2636.
Communications settings are no parity, 8 data bits, and 1 stop bit
(xxxxx-N-8-1, where xxxxx is your modem's maximum speed).
When you have logged on to the BBS, check the "Public" section
for updates or other new Ethernet PC Card information.
Technical Support: 6:00 am to 6:00 pm Pacific Time
Monday through Friday
(800) 435-0640 or (714) 435-2639
BBS: Kingston's Bulletin Board Service
(714) 435-2636, up to 28.8Kbps, 8-N-1
Internet: http://www.kingston.com
For Product Information: sales@kingston.com
For Technical Support: tech_support@kingston.com
Kingston Technology, EtheRx, and QStart are registered
trademarks of Kingston Technology Company. All others are
trademarks or registered trademarks of their respective holders.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.