awdflash.exe is a BIOS update utility for AWARD BIOS only:
Warning:
If you did not use the utility correctly or did not update the right
version of the BIOS, it will damage your system, and your system may
not boot. Therefore, if you have never used this utility before, or
if you are not confident with this update procedure, we suggest you
check with your vendor before use this utility. We recommend you
to ask your vendor to update your BIOS.
This utility is intended to be used by technical people only.
Update your BIOS only if you have problems with your system, or if you
must use some of the new BIOS features. Don't update your BIOS if you
don't have to.
Follow the procedures to update your system's BIOS:
1. download the correct version of BIOS (according to your system):
2. type "awdflash new_bios_file /sy /py old_bios_file",
e.g. "awdflash atc6220.bin /sy /py save.bin".
It will save the old BIOS to save.bin and update the new BIOS to
the flash ROM.
3. Restart the system according to the messages shown on the screen.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.