**** NTLOG INITIATED +DATE+03/25/2003 +TIME+09:56:11
**** NtLog date: Tue Nov 12 19:13:09 2002
**** Exe date: Tue Nov 12 19:18:41 2002
**** Processor : Intel CPU, Pentium III (Coppermine core) (Celeron), stepping 3, 128K on-chip cache detected
**** CPUS : 1
**** System : Windows NT 5.1[2600], Retail, Mouse, Service Pack 1
**** Build Lab : 2600.xpsp1.020828-1920
**** Vid Driver: NV4_DISP
**** Chip Type: GeForce3 Ti 200
**** DAC Type : Integrated RAMDAC
**** Adapter : GeForce3 Ti 200
**** MiniPort : Unknown
**** VRAM : 131072
**** Hertz : 85
**** X Res : 1024
**** Y Res : 768
**** BPP : 32
**** Planes : 1
**** RGB Masks: (888)(bgr)
**** X Pos : 0
**** Y Pos : 0
**** Machine : SYSTEM-2
**** User Name : System2
**** Language : English
**** KM boundary: 2
**** ProductOptions: None
Proc ID Proc.Name Wrkng.Set PagedPool NonPgdPl Pagefile Commit Handles Threads UserObj GdiObj
0 Idle Process-> 20 0 0 0 0 0 1 N/A N/A
4 System-> 44 0 0 0 28 207 47 0 0
324 SMSS.EXE-> 44 5 0 164 164 21 3 0 0
476 CSRSS.EXE-> 1516 34 4 1512 1512 325 11 N/A N/A
500 WINLOGON.EXE-> 1956 53 49 5748 5748 506 19 12 40
544 SERVICES.EXE-> 1676 23 7 1304 1304 270 17 0 4
556 LSASS.EXE-> 1120 35 7 3092 3092 293 20 0 4
716 SVCHOST.EXE-> 1372 21 6 1072 1072 239 9 0 4
768 SVCHOST.EXE-> 10896 100 28 11184 11184 1005 68 3 4
848 SVCHOST.EXE-> 316 12 1 496 496 44 4 N/A N/A
864 SVCHOST.EXE-> 608 28 6 1092 1092 133 14 N/A N/A
1148 SPOOLSV.EXE-> 556 23 3 2468 2468 112 10 0 4
1304 EXPLORER.EXE-> 9596 52 9 9096 9096 331 13 167 282
1428 nvsvc32.exe-> 1264 19 3 448 448 89 3 1 8
1784 MSMSGS.EXE-> 2120 46 10 8860 8860 260 11 19 79
960 wpabaln.exe-> 552 29 2 560 560 47 1 4 14
1036 msiexec.exe-> 5448 39 5 3372 3372 259 7 0 8
420 wuauclt.exe-> 2904 31 2 1264 1264 93 6 9 18
1548 testmgr.exe-> 23612 47 13 17064 17064 231 10 42 54
384 edidv2.exe-> 1516 16 1 384 384 26 1 0 8
****
****
180.44C : +TEST+PASS : Fetched EDID data from the registry: DevNode 00000800 = Acer AF715
180.44C : +TEST+INFO : First 256 bytes of the EDID
180.44C : +TEST+INFO : 0: 00 ff ff ff ff ff ff 00 04 72 05 ac 01 01 01 01
180.44C : +TEST+INFO : 16: 0c 0d 01 03 68 20 18 78 2a 9e a8 a1 54 46 99 24
180.44C : +TEST+INFO : 32: 0e 48 4c a4 43 00 31 59 45 59 61 59 81 59 81 99
180.44C : +TEST+INFO : 48: a9 4f 01 01 01 01 ea 24 00 60 41 00 28 30 30 60
180.44C : +TEST+INFO : 64: 13 00 36 e6 10 00 00 1e 00 00 00 ff 00 33 31 32
180.44C : +TEST+INFO : 80: 30 30 30 30 37 50 4b 30 30 0a 00 00 00 fd 00 32
180.44C : +TEST+INFO : 96: a0 1e 62 14 00 0a 20 20 20 20 20 20 00 00 00 fc
180.44C : +TEST+INFO : 112: 00 41 63 65 72 20 41 46 37 31 35 0a 20 20 00 2c
180.44C : +TEST+INFO : 128: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180.44C : +TEST+INFO : 144: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180.44C : +TEST+INFO : 160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180.44C : +TEST+INFO : 176: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180.44C : +TEST+INFO : 192: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180.44C : +TEST+INFO : 208: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180.44C : +TEST+INFO : 224: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180.44C : +TEST+INFO : 240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : TEST: Verify EDID buffer is at least 128 bytes in length: Required
180.44C : +TEST+INFO : Success condition: Required: EDID is >= 128 bytes
180.44C : +TEST+INFO : Failure condition: EDID is < 128 bytes
180.44C : +TEST+PASS : EDID is 256 bytes in length
180.44C : +VAR+INFO 0 :
180.44C : +VAR+INFO 0 : TEST: Verify that a version 1 EDID is at least revison 3: Required
180.44C : +VAR+INFO 0 : Valid condition: The EDID is at least verison 1.3
180.44C : +VAR+INFO 0 : Invalid condition: The EDID is less than version 1.3
180.44C : +VAR+PASS 0 : EDID 1.3 detected
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : TEST: EDID Header Verification: Reguired
180.44C : +TEST+INFO : Valid Condition: EDID header matches the the byte string 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00
180.44C : +TEST+INFO : Invalid condition: EDID header does not match the byte string exactly
180.44C : +TEST+INFO : Actual EDID Header (may be byte swaped): FFFFFF0000FFFFFF
180.44C : +TEST+PASS : EDID header is valid
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : TEST: EDID 1.x Vendor/Product Information: Required
180.44C : +TEST+INFO : Valid condition: (1) All ID fields are properly populated. This means there are no zeros and no compressed values > 26 except for 31 ("_")
180.44C : +TEST+INFO : Valid condition: a) Bit 7 of byte 0 must be 0
180.44C : +TEST+INFO : Valid condition: (2) Week of manufacture and year of manufacture are less than or equal to the current date
180.44C : +TEST+INFO : Monitor PnP ID: ACR
180.44C : +TEST+PASS : Manufacturer ID field appears to be populated
180.44C : +TEST+PASS : Byte 1 bit 7 of manufacturer ID is not set
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : TEST: EDID 1.x Product Information: Optional if present
180.44C : +TEST+INFO : Valid condition: If product code is present it contains numbers in hex, LSB first
180.44C : +VAR+PASS 1 : Product code: AC05
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : TEST: EDID 1.x Week of manufacture information: Optional if present
180.44C : +TEST+INFO : Valid condition: (1) If a week of manufacture is not provided, it must be zero
180.44C : +TEST+INFO : Invalid condition: (2) If a week of manufacture is provided, it must be in the range 1-54
180.44C : +TEST+INFO : Skip condition: (3) If the EDID is fake
180.44C : +VAR+INFO 2 : Week of manufacture present = 12
180.44C : +VAR+PASS 2 : Week of manufacture is less than or equal to 54
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : TEST: EDID 1.x Year of manufacture information: Required
180.44C : +TEST+INFO : Valid condition: (1) Must be greater than three and less than or equal to the current year minus 1990
180.44C : +TEST+INFO : Invalid condition: (1) A value less than three, which would mean the monitor came out before the EDID spec
180.44C : +TEST+INFO : Invalid condition: (2) A value greater than the current date as reported by this system
180.44C : +TEST+INFO : Skip condition: (3) The EDID is fake
180.44C : +TEST+INFO : Current year to compare against: 2003. EDID Representation: 13
180.44C : +TEST+INFO : Translated year of monitor manufacture: 2003. EDID Representation: 13
180.44C : +TEST+PASS : Year of manufacture is plausible
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : TEST: EDID 1.0 Serial Number: Optional if present
180.44C : +TEST+INFO : Valid condition: If a serial number is present (not 0), then it must be 32-bits, lowest bit is bit 1, highest is bit 32
180.44C : +TEST+INFO : Skip condition: If the EDID is fake
180.44C : +VAR+PASS 3 : Serial Number: 01010101
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : TEST: Verify 1.x compliant EDID revision
180.44C : +TEST+INFO : Valid condition: version = 1.x & an EDID1x header is present
180.44C : +TEST+INFO : Invalid condition: version != 1.x w/ an EDID1x header
180.44C : +TEST+INFO : EDID Version is 1.3
180.44C : +TEST+PASS : EDID 1.x revision is valid
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : TEST: EDID 1.x Video Input Definiton: Required
180.44C : +TEST+INFO : Valid condition: Bit 7 can only be set if the revision of the EDID is greater than or equal to 1.2
180.44C : +TEST+INFO : Invalid condition: Bit 7 set and using EDID 1.0 or 1.1
180.44C : +TEST+INFO : Skip condition: If the EDID is fake
180.44C : +TEST+INFO : Raw value: 874D68: Decoded info:
180.44C : +TEST+INFO : -Analog input
180.44C : +TEST+INFO : -Signal Level Standard: 0.700, 0.000 (0.700 V p-p)
180.44C : +TEST+INFO : -Display does not expect a blank-to-black setup or pedestal per Signal Level Standard
180.44C : +TEST+INFO : -Separate syncs Supported
180.44C : +TEST+INFO : -Composite sync (on Hsync line) not supported
180.44C : +TEST+INFO : -Sync on green video is not supported
180.44C : +TEST+INFO : -Serration of the Vsync pulse is not required when composite sync. or sync-on-green video is used
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : TEST: EDID1.x Max Image Size Test: Required
180.44C : +TEST+INFO : Valid condition: If the type of monitor is not a projector, the image size should not be zero
180.44C : +TEST+INFO : Valid condition: If the type of monitor is a projector, the image size should be zero
180.44C : +TEST+INFO : Invalid condition: The type of monitor is a projector and the image size is not zero
180.44C : +TEST+INFO : Invalid condition: The type of monitor is not a projector and the image size is zero
180.44C : +TEST+INFO : Skip condition: Auto mode is enabled
180.44C : +TEST+INFO : Skip condition: The EDID is fake
180.44C : +TEST+INFO : *****Skipping test as auto mode is enabled
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : TEST: EDID 1.x Gamma Transfer Characteristic: Required
180.44C : +TEST+INFO : Valid condition: The Gamma coefficient should be in the range of 1.00 to 3.55 after decode
180.44C : +TEST+INFO : Invalid condition: The Gamma coefficient is outside of the range of 1.00 to 3.55
180.44C : +TEST+INFO : Skip condition: The Gamma coefficient contains the value of 0xFF - not defined here
180.44C : +TEST+INFO : Skip condition: The EDID is fake
180.44C : +TEST+INFO : Formula to use: gamma = (value_stored + 100.0)/100.0
180.44C : +TEST+INFO : Substituted values: 2.200000 = (120 + 100.0) / 100.0
180.44C : +TEST+PASS : Gamma Transfer Characteristic is within range
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : TEST: EDID 1.x Common Phosphor and Chromaticity: Required
180.44C : +TEST+INFO : Valid condition: No chromaticity values and white points should be 0.0 (0.0 ~= 0.0 - 0.0001)
180.44C : +TEST+INFO : Invalid condition: A chromaticity value or white point that is approximately zero
180.44C : +TEST+INFO : Skip condition: The EDID is fake
180.44C : +TEST+INFO : Red X = 0.631
180.44C : +TEST+INFO : Red Y = 0.329
180.44C : +TEST+INFO : Green X = 0.276
180.44C : +TEST+INFO : Green Y = 0.600
180.44C : +TEST+INFO : Blue X = 0.143
180.44C : +TEST+INFO : Blue Y = 0.057
180.44C : +TEST+INFO : White X = 0.283
180.44C : +TEST+INFO : White Y = 0.297
180.44C : +TEST+PASS : Value for Red X is not zero
180.44C : +TEST+PASS : Value for Red Y is not zero
180.44C : +TEST+PASS : Value for Green X is not zero
180.44C : +TEST+PASS : Value for Green Y is not zero
180.44C : +TEST+PASS : Value for Blue X is not zero
180.44C : +TEST+PASS : Value for Blue Y is not zero
180.44C : +TEST+PASS : Value for White X is not zero
180.44C : +TEST+PASS : Value for White Y is not zero
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : TEST: EDID1.x VESA Established timings: Required
180.44C : +TEST+INFO : Valid condition: The current mode is in the established, detailed or standard timings sections
180.44C : +TEST+INFO : Invalid condition: The current mode is not in the established, detailed or standard timings sections
180.44C : +TEST+INFO : Raw info: Established Timings 43A4 ManufacturerReserved 0 1152x870@75: 0
180.44C : +TEST+INFO : Established Timing Mode [640, 480] @ 75(NI), source = VESA
180.44C : +TEST+INFO : Established Timing Mode [640, 480] @ 60(NI), source = IBM, VGA
180.44C : +TEST+INFO : Established Timing Mode [720, 400] @ 70(NI), source = IBM, VGA
180.44C : +TEST+INFO : Established Timing Mode [1280, 1024] @ 75(NI), source = VESA
180.44C : +TEST+INFO : Established Timing Mode [1024, 768] @ 75(NI), source = VESA
180.44C : +TEST+INFO : Established Timing Mode [800, 600] @ 75(NI), source = VESA
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : TEST: EDID 1.x Standard Timings: Required
180.44C : +TEST+INFO : Valid condition: (1) Unused fields (timings) set to 0101h
180.44C : +TEST+INFO : Valid condition: (2) Used files use a unique 2-byte code
180.44C : +TEST+INFO : Valid condition: (3) The mode must be displayable on the monitor w/o causing a sync break
180.44C : +TEST+INFO : Valid condition: (4) The current mode must be in the established, standard, or detailed timings lists
180.44C : +TEST+INFO : Valid condition: (5) The horizontal pixels active field is non-zero
180.44C : +TEST+INFO : Valid condition: (6) The mode is not a duplicate of any other mode in the extended, detailed, or standard timings lists
180.44C : +TEST+INFO : Invalid condition: (1) Unused fields (timings) are not set to 0101h
180.44C : +TEST+INFO : Invalid condition: (2) The monitor looses sync with the adapter
180.44C : +TEST+INFO : Invalid condition: (3) Used fields do not use a unique code
180.44C : +TEST+INFO : Invalid condition: (a) The same standard timing code is found in more than one place in the structure
180.44C : +TEST+INFO : Invalid condition: (4) The current mode is not in the established, standard, or detailed timings lists
180.44C : +TEST+INFO : Invalid condition: (5) The horizontal pixels active field does not have a 0 in it [ 8(0 + 31) = 248 < 256]
180.44C : +TEST+INFO : Invalid condition: (6) Duplicate modes will be failed during a check at the end of the detailed timings
180.44C : +TEST+INFO : Skip condition: (7) The EDID is fake
180.44C : +TEST+INFO : Verifying standard timing ID #0
180.44C : +TEST+PASS : Added standard timing mode [640, 480 @ 85(NI)]
180.44C : +TEST+INFO : Aspect ratio is 4:3
180.44C : +TEST+INFO : Verifying standard timing ID #1
180.44C : +TEST+PASS : Added standard timing mode [800, 600 @ 85(NI)]
180.44C : +TEST+INFO : Aspect ratio is 4:3
180.44C : +TEST+INFO : Verifying standard timing ID #2
180.44C : +TEST+PASS : Added standard timing mode [1024, 768 @ 85(NI)]
180.44C : +TEST+INFO : Aspect ratio is 4:3
180.44C : +TEST+INFO : Verifying standard timing ID #3
180.44C : +TEST+PASS : Added standard timing mode [1280, 960 @ 85(NI)]
180.44C : +TEST+INFO : Aspect ratio is 4:3
180.44C : +TEST+INFO : Verifying standard timing ID #4
180.44C : +TEST+PASS : Added standard timing mode [1280, 1024 @ 85(NI)]
180.44C : +TEST+INFO : Aspect ratio is 5:4
180.44C : +TEST+INFO : Verifying standard timing ID #5
180.44C : +TEST+PASS : Added standard timing mode [1600, 1200 @ 75(NI)]
180.44C : +TEST+INFO : Aspect ratio is 4:3
180.44C : +TEST+INFO : Verifying standard timing ID #6
180.44C : +TEST+PASS : Field is unused
180.44C : +TEST+INFO : Verifying standard timing ID #7
180.44C : +TEST+PASS : Field is unused
180.44C : +TEST+PASS : All standard timings appear to be unique if present
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : Detailed Monitor Description
180.44C : +TEST+INFO : Detailed timing #0: 1024x768 @84Hz
180.44C : +TEST+PASS : Values are valid
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : Monitor Descriptor Block Summary
180.44C : +TEST+INFO : Monitor Serial Number
180.44C : +TEST+INFO : 31200007PK0
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : Monitor Descriptor Block Summary
180.44C : +TEST+INFO : Monitor Range Limits
180.44C : +TEST+INFO : Vertical rate 50 - 160 Hz
180.44C : +TEST+INFO : Horizontal in 30 - 98 KHz
180.44C : +TEST+INFO : Max Supported Pixel Clock in MHz 200
180.44C : +TEST+INFO : No secondary timing supported
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : Monitor Descriptor Block Summary
180.44C : +TEST+INFO : Monitor Name
180.44C : +TEST+INFO : Acer AF715
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : TEST: EDID 1.x 128-byte checksum: Required
180.44C : +TEST+INFO : Valid condition: The sum of all bytes in the 128-byte EDID must equal 0
180.44C : +TEST+INFO : Invalid condition: The sum of all bytes in the 128-byte EDID does not equal 0
180.44C : +TEST+INFO : Formula used for checksum validation will be: BYTE bCheckSum = sum(b0...b127)
180.44C : +TEST+INFO : Raw info: This edids checksum value = 0X2C
180.44C : +TEST+PASS : Checksum in EDID matches calculated checksum
180.44C : +TEST+INFO :
180.44C : +TEST+INFO : Skipping device NetMeeting driver (\\.\DISPLAYV1) as non-physical
180.44C : +TEST+INFO : Skipping device RDPDD Chained DD (\\.\DISPLAYV2) as non-physical
180.44C : +TEST+INFO : Display device instance 3 is too big, so finished
180.44C : NTLOG REPORT -------------------------------------------------------
180.44C : Tests Total 27 | Variations Total 4
180.44C : ------------------------------------------------------------------
180.44C : Tests Passed 27 100% | Variations Passed 4 100%
180.44C : Tests Warned 0 0% | Variations Warned 0 0%
180.44C : Tests Failed sev3 0 0% | Variations Failed sev3 0 0%
180.44C : Tests Failed sev2 0 0% | Variations Failed sev2 0 0%
180.44C : Tests Failed sev1 0 0% | Variations Failed sev1 0 0%
180.44C : Tests Blocked 0 0% | Variations Blocked 0 0%
180.44C : Tests Aborted 0 0% | Variations Aborted 0 0%
180.44C : --------------------------------------------------------------------
****
Proc ID Proc.Name Wrkng.Set PagedPool NonPgdPl Pagefile Commit Handles Threads UserObj GdiObj
0 Idle Process-> 20 0 0 0 0 0 1 N/A N/A
4 System-> 44 0 0 0 28 207 47 0 0
324 SMSS.EXE-> 44 5 0 164 164 21 3 0 0
476 CSRSS.EXE-> 1516 34 4 1512 1512 325 11 N/A N/A
500 WINLOGON.EXE-> 1956 53 49 5748 5748 506 19 12 40
544 SERVICES.EXE-> 1676 23 7 1304 1304 271 17 0 4
556 LSASS.EXE-> 1120 35 7 3092 3092 293 20 0 4
716 SVCHOST.EXE-> 1372 21 6 1072 1072 239 9 0 4
768 SVCHOST.EXE-> 10896 100 28 11184 11184 1005 68 3 4
848 SVCHOST.EXE-> 316 12 1 496 496 44 4 N/A N/A
864 SVCHOST.EXE-> 608 28 6 1092 1092 133 14 N/A N/A
1148 SPOOLSV.EXE-> 556 23 3 2468 2468 112 10 0 4
1304 EXPLORER.EXE-> 9596 52 9 9096 9096 331 13 167 282
1428 nvsvc32.exe-> 1264 19 3 448 448 89 3 1 8
1784 MSMSGS.EXE-> 2120 46 10 8860 8860 260 11 19 79
960 wpabaln.exe-> 552 29 2 560 560 47 1 4 14
1036 msiexec.exe-> 5448 39 5 3372 3372 259 7 0 8
420 wuauclt.exe-> 2904 31 2 1264 1264 93 6 9 18
1548 testmgr.exe-> 23612 47 13 17064 17064 231 10 42 54
384 edidv2.exe-> 1808 16 1 464 464 44 1 0 8
**** NTLOG TERMINATED +DATE+03/25/2003 +TIME+09:56:11
/**** Time/Date/Name WrapUp ****/
HCT Version: 11.1.021213 Release
HCT Shell Date: Nov 12 2002 17:56:55
Test Kit: 16
Test Device: DISPLAY\ACRAC05\4&15CC1A05&0&22446688&01&00
Test Wrap-up Date: 3-25-2003
Test Wrap-up Time: 9:56:13
Test Name at Wrap-Up: EDID 1.3 & DDC
/**** Time/Date/Name WrapUp ****/
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.