**** NTLOG INITIATED +DATE+03/26/2003 +TIME+14:14:08 **** NtLog date: Tue Nov 12 19:13:09 2002 **** Exe date: Tue Nov 12 19:18:41 2002 **** Processor : Intel CPU, Pentium III (Coppermine core) (Celeron), stepping 3, 128K on-chip cache detected **** CPUS : 1 **** System : Windows NT 5.1[2600], Retail, Mouse, Service Pack 1 **** Build Lab : 2600.xpsp1.020828-1920 **** Vid Driver: NV4_DISP **** Chip Type: GeForce3 Ti 200 **** DAC Type : Integrated RAMDAC **** Adapter : GeForce3 Ti 200 **** MiniPort : Unknown **** VRAM : 131072 **** Hertz : 85 **** X Res : 1024 **** Y Res : 768 **** BPP : 32 **** Planes : 1 **** RGB Masks: (888)(bgr) **** X Pos : 0 **** Y Pos : 0 **** Machine : SYSTEM-2 **** User Name : System2 **** Language : English **** KM boundary: 2 **** ProductOptions: None Proc ID Proc.Name Wrkng.Set PagedPool NonPgdPl Pagefile Commit Handles Threads UserObj GdiObj 0 Idle Process-> 20 0 0 0 0 0 1 N/A N/A 4 System-> 44 0 0 0 28 111 47 0 0 324 SMSS.EXE-> 36 5 0 164 164 21 3 0 0 480 CSRSS.EXE-> 1472 34 4 1556 1556 301 12 N/A N/A 504 WINLOGON.EXE-> 2056 53 47 5724 5724 506 19 12 40 548 SERVICES.EXE-> 1644 28 9 8552 8552 346 18 0 4 560 LSASS.EXE-> 1024 35 7 3068 3068 284 19 0 4 716 SVCHOST.EXE-> 1128 21 6 1032 1032 217 8 0 4 740 SVCHOST.EXE-> 8760 99 25 11132 11132 967 62 3 4 816 SVCHOST.EXE-> 360 12 1 520 520 46 5 N/A N/A 832 SVCHOST.EXE-> 584 28 5 1092 1092 130 14 N/A N/A 1076 SPOOLSV.EXE-> 392 23 3 2496 2496 112 10 0 4 1196 EXPLORER.EXE-> 4748 48 7 6760 6760 255 10 74 196 1324 nvsvc32.exe-> 1120 19 3 448 448 89 3 1 8 1672 MSMSGS.EXE-> 1604 43 7 7304 7304 240 10 17 66 888 wpabaln.exe-> 848 29 2 560 560 47 1 4 14 1444 testmgr.exe-> 21524 47 13 17032 17032 230 10 42 54 1860 edidv2.exe-> 1516 16 1 384 384 26 1 0 8 **** **** 744.714 : +TEST+PASS : Fetched EDID data from the registry: DevNode 00000800 = Acer AF715 744.714 : +TEST+INFO : First 256 bytes of the EDID 744.714 : +TEST+INFO : 0: 00 ff ff ff ff ff ff 00 04 72 05 ac 01 01 01 01 744.714 : +TEST+INFO : 16: 0c 0d 01 03 68 20 18 78 2a 9e a8 a1 54 46 99 24 744.714 : +TEST+INFO : 32: 0e 48 4c a4 43 00 31 59 45 59 61 59 81 59 81 99 744.714 : +TEST+INFO : 48: a9 4f 01 01 01 01 ea 24 00 60 41 00 28 30 30 60 744.714 : +TEST+INFO : 64: 13 00 36 e6 10 00 00 1e 00 00 00 ff 00 33 31 32 744.714 : +TEST+INFO : 80: 30 30 30 30 32 50 4b 30 30 0a 00 00 00 fd 00 32 744.714 : +TEST+INFO : 96: a0 1e 62 14 00 0a 20 20 20 20 20 20 00 00 00 fc 744.714 : +TEST+INFO : 112: 00 41 63 65 72 20 41 46 37 31 35 0a 20 20 00 31 744.714 : +TEST+INFO : 128: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 744.714 : +TEST+INFO : 144: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 744.714 : +TEST+INFO : 160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 744.714 : +TEST+INFO : 176: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 744.714 : +TEST+INFO : 192: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 744.714 : +TEST+INFO : 208: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 744.714 : +TEST+INFO : 224: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 744.714 : +TEST+INFO : 240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : TEST: Verify EDID buffer is at least 128 bytes in length: Required 744.714 : +TEST+INFO : Success condition: Required: EDID is >= 128 bytes 744.714 : +TEST+INFO : Failure condition: EDID is < 128 bytes 744.714 : +TEST+PASS : EDID is 256 bytes in length 744.714 : +VAR+INFO 0 : 744.714 : +VAR+INFO 0 : TEST: Verify that a version 1 EDID is at least revison 3: Required 744.714 : +VAR+INFO 0 : Valid condition: The EDID is at least verison 1.3 744.714 : +VAR+INFO 0 : Invalid condition: The EDID is less than version 1.3 744.714 : +VAR+PASS 0 : EDID 1.3 detected 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : TEST: EDID Header Verification: Reguired 744.714 : +TEST+INFO : Valid Condition: EDID header matches the the byte string 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00 744.714 : +TEST+INFO : Invalid condition: EDID header does not match the byte string exactly 744.714 : +TEST+INFO : Actual EDID Header (may be byte swaped): FFFFFF0000FFFFFF 744.714 : +TEST+PASS : EDID header is valid 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : TEST: EDID 1.x Vendor/Product Information: Required 744.714 : +TEST+INFO : Valid condition: (1) All ID fields are properly populated. This means there are no zeros and no compressed values > 26 except for 31 ("_") 744.714 : +TEST+INFO : Valid condition: a) Bit 7 of byte 0 must be 0 744.714 : +TEST+INFO : Valid condition: (2) Week of manufacture and year of manufacture are less than or equal to the current date 744.714 : +TEST+INFO : Monitor PnP ID: ACR 744.714 : +TEST+PASS : Manufacturer ID field appears to be populated 744.714 : +TEST+PASS : Byte 1 bit 7 of manufacturer ID is not set 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : TEST: EDID 1.x Product Information: Optional if present 744.714 : +TEST+INFO : Valid condition: If product code is present it contains numbers in hex, LSB first 744.714 : +VAR+PASS 1 : Product code: AC05 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : TEST: EDID 1.x Week of manufacture information: Optional if present 744.714 : +TEST+INFO : Valid condition: (1) If a week of manufacture is not provided, it must be zero 744.714 : +TEST+INFO : Invalid condition: (2) If a week of manufacture is provided, it must be in the range 1-54 744.714 : +TEST+INFO : Skip condition: (3) If the EDID is fake 744.714 : +VAR+INFO 2 : Week of manufacture present = 12 744.714 : +VAR+PASS 2 : Week of manufacture is less than or equal to 54 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : TEST: EDID 1.x Year of manufacture information: Required 744.714 : +TEST+INFO : Valid condition: (1) Must be greater than three and less than or equal to the current year minus 1990 744.714 : +TEST+INFO : Invalid condition: (1) A value less than three, which would mean the monitor came out before the EDID spec 744.714 : +TEST+INFO : Invalid condition: (2) A value greater than the current date as reported by this system 744.714 : +TEST+INFO : Skip condition: (3) The EDID is fake 744.714 : +TEST+INFO : Current year to compare against: 2003. EDID Representation: 13 744.714 : +TEST+INFO : Translated year of monitor manufacture: 2003. EDID Representation: 13 744.714 : +TEST+PASS : Year of manufacture is plausible 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : TEST: EDID 1.0 Serial Number: Optional if present 744.714 : +TEST+INFO : Valid condition: If a serial number is present (not 0), then it must be 32-bits, lowest bit is bit 1, highest is bit 32 744.714 : +TEST+INFO : Skip condition: If the EDID is fake 744.714 : +VAR+PASS 3 : Serial Number: 01010101 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : TEST: Verify 1.x compliant EDID revision 744.714 : +TEST+INFO : Valid condition: version = 1.x & an EDID1x header is present 744.714 : +TEST+INFO : Invalid condition: version != 1.x w/ an EDID1x header 744.714 : +TEST+INFO : EDID Version is 1.3 744.714 : +TEST+PASS : EDID 1.x revision is valid 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : TEST: EDID 1.x Video Input Definiton: Required 744.714 : +TEST+INFO : Valid condition: Bit 7 can only be set if the revision of the EDID is greater than or equal to 1.2 744.714 : +TEST+INFO : Invalid condition: Bit 7 set and using EDID 1.0 or 1.1 744.714 : +TEST+INFO : Skip condition: If the EDID is fake 744.714 : +TEST+INFO : Raw value: 874D68: Decoded info: 744.714 : +TEST+INFO : -Analog input 744.714 : +TEST+INFO : -Signal Level Standard: 0.700, 0.000 (0.700 V p-p) 744.714 : +TEST+INFO : -Display does not expect a blank-to-black setup or pedestal per Signal Level Standard 744.714 : +TEST+INFO : -Separate syncs Supported 744.714 : +TEST+INFO : -Composite sync (on Hsync line) not supported 744.714 : +TEST+INFO : -Sync on green video is not supported 744.714 : +TEST+INFO : -Serration of the Vsync pulse is not required when composite sync. or sync-on-green video is used 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : TEST: EDID1.x Max Image Size Test: Required 744.714 : +TEST+INFO : Valid condition: If the type of monitor is not a projector, the image size should not be zero 744.714 : +TEST+INFO : Valid condition: If the type of monitor is a projector, the image size should be zero 744.714 : +TEST+INFO : Invalid condition: The type of monitor is a projector and the image size is not zero 744.714 : +TEST+INFO : Invalid condition: The type of monitor is not a projector and the image size is zero 744.714 : +TEST+INFO : Skip condition: Auto mode is enabled 744.714 : +TEST+INFO : Skip condition: The EDID is fake 744.714 : +TEST+INFO : *****Skipping test as auto mode is enabled 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : TEST: EDID 1.x Gamma Transfer Characteristic: Required 744.714 : +TEST+INFO : Valid condition: The Gamma coefficient should be in the range of 1.00 to 3.55 after decode 744.714 : +TEST+INFO : Invalid condition: The Gamma coefficient is outside of the range of 1.00 to 3.55 744.714 : +TEST+INFO : Skip condition: The Gamma coefficient contains the value of 0xFF - not defined here 744.714 : +TEST+INFO : Skip condition: The EDID is fake 744.714 : +TEST+INFO : Formula to use: gamma = (value_stored + 100.0)/100.0 744.714 : +TEST+INFO : Substituted values: 2.200000 = (120 + 100.0) / 100.0 744.714 : +TEST+PASS : Gamma Transfer Characteristic is within range 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : TEST: EDID 1.x Common Phosphor and Chromaticity: Required 744.714 : +TEST+INFO : Valid condition: No chromaticity values and white points should be 0.0 (0.0 ~= 0.0 - 0.0001) 744.714 : +TEST+INFO : Invalid condition: A chromaticity value or white point that is approximately zero 744.714 : +TEST+INFO : Skip condition: The EDID is fake 744.714 : +TEST+INFO : Red X = 0.631 744.714 : +TEST+INFO : Red Y = 0.329 744.714 : +TEST+INFO : Green X = 0.276 744.714 : +TEST+INFO : Green Y = 0.600 744.714 : +TEST+INFO : Blue X = 0.143 744.714 : +TEST+INFO : Blue Y = 0.057 744.714 : +TEST+INFO : White X = 0.283 744.714 : +TEST+INFO : White Y = 0.297 744.714 : +TEST+PASS : Value for Red X is not zero 744.714 : +TEST+PASS : Value for Red Y is not zero 744.714 : +TEST+PASS : Value for Green X is not zero 744.714 : +TEST+PASS : Value for Green Y is not zero 744.714 : +TEST+PASS : Value for Blue X is not zero 744.714 : +TEST+PASS : Value for Blue Y is not zero 744.714 : +TEST+PASS : Value for White X is not zero 744.714 : +TEST+PASS : Value for White Y is not zero 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : TEST: EDID1.x VESA Established timings: Required 744.714 : +TEST+INFO : Valid condition: The current mode is in the established, detailed or standard timings sections 744.714 : +TEST+INFO : Invalid condition: The current mode is not in the established, detailed or standard timings sections 744.714 : +TEST+INFO : Raw info: Established Timings 43A4 ManufacturerReserved 0 1152x870@75: 0 744.714 : +TEST+INFO : Established Timing Mode [640, 480] @ 75(NI), source = VESA 744.714 : +TEST+INFO : Established Timing Mode [640, 480] @ 60(NI), source = IBM, VGA 744.714 : +TEST+INFO : Established Timing Mode [720, 400] @ 70(NI), source = IBM, VGA 744.714 : +TEST+INFO : Established Timing Mode [1280, 1024] @ 75(NI), source = VESA 744.714 : +TEST+INFO : Established Timing Mode [1024, 768] @ 75(NI), source = VESA 744.714 : +TEST+INFO : Established Timing Mode [800, 600] @ 75(NI), source = VESA 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : TEST: EDID 1.x Standard Timings: Required 744.714 : +TEST+INFO : Valid condition: (1) Unused fields (timings) set to 0101h 744.714 : +TEST+INFO : Valid condition: (2) Used files use a unique 2-byte code 744.714 : +TEST+INFO : Valid condition: (3) The mode must be displayable on the monitor w/o causing a sync break 744.714 : +TEST+INFO : Valid condition: (4) The current mode must be in the established, standard, or detailed timings lists 744.714 : +TEST+INFO : Valid condition: (5) The horizontal pixels active field is non-zero 744.714 : +TEST+INFO : Valid condition: (6) The mode is not a duplicate of any other mode in the extended, detailed, or standard timings lists 744.714 : +TEST+INFO : Invalid condition: (1) Unused fields (timings) are not set to 0101h 744.714 : +TEST+INFO : Invalid condition: (2) The monitor looses sync with the adapter 744.714 : +TEST+INFO : Invalid condition: (3) Used fields do not use a unique code 744.714 : +TEST+INFO : Invalid condition: (a) The same standard timing code is found in more than one place in the structure 744.714 : +TEST+INFO : Invalid condition: (4) The current mode is not in the established, standard, or detailed timings lists 744.714 : +TEST+INFO : Invalid condition: (5) The horizontal pixels active field does not have a 0 in it [ 8(0 + 31) = 248 < 256] 744.714 : +TEST+INFO : Invalid condition: (6) Duplicate modes will be failed during a check at the end of the detailed timings 744.714 : +TEST+INFO : Skip condition: (7) The EDID is fake 744.714 : +TEST+INFO : Verifying standard timing ID #0 744.714 : +TEST+PASS : Added standard timing mode [640, 480 @ 85(NI)] 744.714 : +TEST+INFO : Aspect ratio is 4:3 744.714 : +TEST+INFO : Verifying standard timing ID #1 744.714 : +TEST+PASS : Added standard timing mode [800, 600 @ 85(NI)] 744.714 : +TEST+INFO : Aspect ratio is 4:3 744.714 : +TEST+INFO : Verifying standard timing ID #2 744.714 : +TEST+PASS : Added standard timing mode [1024, 768 @ 85(NI)] 744.714 : +TEST+INFO : Aspect ratio is 4:3 744.714 : +TEST+INFO : Verifying standard timing ID #3 744.714 : +TEST+PASS : Added standard timing mode [1280, 960 @ 85(NI)] 744.714 : +TEST+INFO : Aspect ratio is 4:3 744.714 : +TEST+INFO : Verifying standard timing ID #4 744.714 : +TEST+PASS : Added standard timing mode [1280, 1024 @ 85(NI)] 744.714 : +TEST+INFO : Aspect ratio is 5:4 744.714 : +TEST+INFO : Verifying standard timing ID #5 744.714 : +TEST+PASS : Added standard timing mode [1600, 1200 @ 75(NI)] 744.714 : +TEST+INFO : Aspect ratio is 4:3 744.714 : +TEST+INFO : Verifying standard timing ID #6 744.714 : +TEST+PASS : Field is unused 744.714 : +TEST+INFO : Verifying standard timing ID #7 744.714 : +TEST+PASS : Field is unused 744.714 : +TEST+PASS : All standard timings appear to be unique if present 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : Detailed Monitor Description 744.714 : +TEST+INFO : Detailed timing #0: 1024x768 @84Hz 744.714 : +TEST+PASS : Values are valid 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : Monitor Descriptor Block Summary 744.714 : +TEST+INFO : Monitor Serial Number 744.714 : +TEST+INFO : 31200002PK0 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : Monitor Descriptor Block Summary 744.714 : +TEST+INFO : Monitor Range Limits 744.714 : +TEST+INFO : Vertical rate 50 - 160 Hz 744.714 : +TEST+INFO : Horizontal in 30 - 98 KHz 744.714 : +TEST+INFO : Max Supported Pixel Clock in MHz 200 744.714 : +TEST+INFO : No secondary timing supported 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : Monitor Descriptor Block Summary 744.714 : +TEST+INFO : Monitor Name 744.714 : +TEST+INFO : Acer AF715 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : TEST: EDID 1.x 128-byte checksum: Required 744.714 : +TEST+INFO : Valid condition: The sum of all bytes in the 128-byte EDID must equal 0 744.714 : +TEST+INFO : Invalid condition: The sum of all bytes in the 128-byte EDID does not equal 0 744.714 : +TEST+INFO : Formula used for checksum validation will be: BYTE bCheckSum = sum(b0...b127) 744.714 : +TEST+INFO : Raw info: This edids checksum value = 0X31 744.714 : +TEST+PASS : Checksum in EDID matches calculated checksum 744.714 : +TEST+INFO : 744.714 : +TEST+INFO : Skipping device NetMeeting driver (\\.\DISPLAYV1) as non-physical 744.714 : +TEST+INFO : Skipping device RDPDD Chained DD (\\.\DISPLAYV2) as non-physical 744.714 : +TEST+INFO : Display device instance 3 is too big, so finished 744.714 : NTLOG REPORT ------------------------------------------------------- 744.714 : Tests Total 27 | Variations Total 4 744.714 : ------------------------------------------------------------------ 744.714 : Tests Passed 27 100% | Variations Passed 4 100% 744.714 : Tests Warned 0 0% | Variations Warned 0 0% 744.714 : Tests Failed sev3 0 0% | Variations Failed sev3 0 0% 744.714 : Tests Failed sev2 0 0% | Variations Failed sev2 0 0% 744.714 : Tests Failed sev1 0 0% | Variations Failed sev1 0 0% 744.714 : Tests Blocked 0 0% | Variations Blocked 0 0% 744.714 : Tests Aborted 0 0% | Variations Aborted 0 0% 744.714 : -------------------------------------------------------------------- **** Proc ID Proc.Name Wrkng.Set PagedPool NonPgdPl Pagefile Commit Handles Threads UserObj GdiObj 0 Idle Process-> 20 0 0 0 0 0 1 N/A N/A 4 System-> 44 0 0 0 28 111 47 0 0 324 SMSS.EXE-> 36 5 0 164 164 21 3 0 0 480 CSRSS.EXE-> 1472 34 4 1556 1556 301 12 N/A N/A 504 WINLOGON.EXE-> 2056 53 47 5724 5724 506 19 12 40 548 SERVICES.EXE-> 1648 28 9 8552 8552 347 18 0 4 560 LSASS.EXE-> 1024 35 7 3068 3068 284 19 0 4 716 SVCHOST.EXE-> 1128 21 6 1032 1032 217 8 0 4 740 SVCHOST.EXE-> 8760 99 25 11132 11132 967 62 3 4 816 SVCHOST.EXE-> 360 12 1 520 520 46 5 N/A N/A 832 SVCHOST.EXE-> 584 28 5 1092 1092 130 14 N/A N/A 1076 SPOOLSV.EXE-> 392 23 3 2496 2496 112 10 0 4 1196 EXPLORER.EXE-> 4748 48 7 6760 6760 255 10 74 196 1324 nvsvc32.exe-> 1120 19 3 448 448 89 3 1 8 1672 MSMSGS.EXE-> 1604 43 7 7304 7304 240 10 17 66 888 wpabaln.exe-> 848 29 2 560 560 47 1 4 14 1444 testmgr.exe-> 21524 47 13 17032 17032 230 10 42 54 1860 edidv2.exe-> 1808 16 1 464 464 44 1 0 8 **** NTLOG TERMINATED +DATE+03/26/2003 +TIME+14:14:08 /**** Time/Date/Name WrapUp ****/ HCT Version: 11.1.021213 Release HCT Shell Date: Nov 12 2002 17:56:55 Test Kit: 16 Test Device: DISPLAY\ACRAC05\4&15CC1A05&0&22446688&01&00 Test Wrap-up Date: 3-26-2003 Test Wrap-up Time: 14:14:9 Test Name at Wrap-Up: EDID 1.3 & DDC /**** Time/Date/Name WrapUp ****/Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.