**** NTLOG INITIATED +DATE+03/26/2003 +TIME+11:50:40
**** NtLog date: Tue Nov 12 19:13:09 2002
**** Exe date: Tue Nov 12 19:18:41 2002
**** Processor : Intel CPU, Pentium II (Mendocino core) (Celeron), stepping 5, 128K on-chip cache detected
**** CPUS : 1
**** System : Windows NT 5.1[2600], Retail, Mouse, Service Pack 1
**** Build Lab : 2600.xpsp1.020828-1920
**** Vid Driver: G550DHD
**** Chip Type: Matrox G550
**** DAC Type : Integrated, 360 MHz
**** Adapter : Matrox Millennium G550 AGP
**** MiniPort : G550DH
**** VRAM : 32768
**** Hertz : 85
**** X Res : 1024
**** Y Res : 768
**** BPP : 32
**** Planes : 1
**** RGB Masks: (888)(bgr)
**** X Pos : 0
**** Y Pos : 0
**** Machine : SYSTEM-1
**** User Name : System1
**** Language : English
**** KM boundary: 2
**** ProductOptions: None
Proc ID Proc.Name Wrkng.Set PagedPool NonPgdPl Pagefile Commit Handles Threads UserObj GdiObj
0 Idle Process-> 20 0 0 0 0 0 1 N/A N/A
4 System-> 44 0 0 0 28 222 49 0 0
328 SMSS.EXE-> 36 5 0 164 164 21 3 0 0
488 CSRSS.EXE-> 1448 35 4 1472 1472 340 11 N/A N/A
524 WINLOGON.EXE-> 1780 53 43 5728 5728 506 19 12 40
568 SERVICES.EXE-> 1816 29 9 8544 8544 354 18 0 4
580 LSASS.EXE-> 1172 35 7 3116 3116 295 21 0 4
748 SVCHOST.EXE-> 1092 21 6 1092 1092 236 10 0 4
800 SVCHOST.EXE-> 10580 100 29 11312 11312 1033 68 3 4
900 SVCHOST.EXE-> 436 13 2 564 564 48 5 N/A N/A
976 SVCHOST.EXE-> 596 28 6 1116 1116 135 15 N/A N/A
1228 EXPLORER.EXE-> 5784 49 8 7040 7040 285 10 75 197
1256 SPOOLSV.EXE-> 1024 23 3 2552 2552 124 11 0 4
1448 mgabg.exe-> 32 12 1 344 344 24 1 0 4
1912 PDesk.exe-> 1560 62 13 1736 1736 75 18 5 24
1928 MSMSGS.EXE-> 2084 46 9 8860 8860 258 11 19 76
1408 wpabaln.exe-> 328 29 2 560 560 47 1 4 14
1640 MSIEXEC.EXE-> 5404 39 5 3356 3356 259 7 0 8
1584 testmgr.exe-> 23600 47 13 17116 17116 231 10 42 54
1856 wuauclt.exe-> 2892 31 2 1264 1264 93 6 9 18
368 edidv2.exe-> 1516 16 1 384 384 26 1 0 8
****
****
170.73C : +TEST+PASS : Fetched EDID data from the registry: DevNode 00000CD0 = Acer AF715
170.73C : +TEST+INFO : First 256 bytes of the EDID
170.73C : +TEST+INFO : 0: 00 ff ff ff ff ff ff 00 04 72 05 ac 01 01 01 01
170.73C : +TEST+INFO : 16: 0c 0d 01 03 68 20 18 78 2a 9e a8 a1 54 46 99 24
170.73C : +TEST+INFO : 32: 0e 48 4c a4 43 00 31 59 45 59 61 59 81 59 81 99
170.73C : +TEST+INFO : 48: a9 4f 01 01 01 01 ea 24 00 60 41 00 28 30 30 60
170.73C : +TEST+INFO : 64: 13 00 36 e6 10 00 00 1e 00 00 00 ff 00 33 31 32
170.73C : +TEST+INFO : 80: 30 30 30 30 32 50 4b 30 30 0a 00 00 00 fd 00 32
170.73C : +TEST+INFO : 96: a0 1e 62 14 00 0a 20 20 20 20 20 20 00 00 00 fc
170.73C : +TEST+INFO : 112: 00 41 63 65 72 20 41 46 37 31 35 0a 20 20 00 31
170.73C : +TEST+INFO : 128: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170.73C : +TEST+INFO : 144: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170.73C : +TEST+INFO : 160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170.73C : +TEST+INFO : 176: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170.73C : +TEST+INFO : 192: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170.73C : +TEST+INFO : 208: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170.73C : +TEST+INFO : 224: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170.73C : +TEST+INFO : 240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : TEST: Verify EDID buffer is at least 128 bytes in length: Required
170.73C : +TEST+INFO : Success condition: Required: EDID is >= 128 bytes
170.73C : +TEST+INFO : Failure condition: EDID is < 128 bytes
170.73C : +TEST+PASS : EDID is 256 bytes in length
170.73C : +VAR+INFO 0 :
170.73C : +VAR+INFO 0 : TEST: Verify that a version 1 EDID is at least revison 3: Required
170.73C : +VAR+INFO 0 : Valid condition: The EDID is at least verison 1.3
170.73C : +VAR+INFO 0 : Invalid condition: The EDID is less than version 1.3
170.73C : +VAR+PASS 0 : EDID 1.3 detected
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : TEST: EDID Header Verification: Reguired
170.73C : +TEST+INFO : Valid Condition: EDID header matches the the byte string 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00
170.73C : +TEST+INFO : Invalid condition: EDID header does not match the byte string exactly
170.73C : +TEST+INFO : Actual EDID Header (may be byte swaped): FFFFFF0000FFFFFF
170.73C : +TEST+PASS : EDID header is valid
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : TEST: EDID 1.x Vendor/Product Information: Required
170.73C : +TEST+INFO : Valid condition: (1) All ID fields are properly populated. This means there are no zeros and no compressed values > 26 except for 31 ("_")
170.73C : +TEST+INFO : Valid condition: a) Bit 7 of byte 0 must be 0
170.73C : +TEST+INFO : Valid condition: (2) Week of manufacture and year of manufacture are less than or equal to the current date
170.73C : +TEST+INFO : Monitor PnP ID: ACR
170.73C : +TEST+PASS : Manufacturer ID field appears to be populated
170.73C : +TEST+PASS : Byte 1 bit 7 of manufacturer ID is not set
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : TEST: EDID 1.x Product Information: Optional if present
170.73C : +TEST+INFO : Valid condition: If product code is present it contains numbers in hex, LSB first
170.73C : +VAR+PASS 1 : Product code: AC05
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : TEST: EDID 1.x Week of manufacture information: Optional if present
170.73C : +TEST+INFO : Valid condition: (1) If a week of manufacture is not provided, it must be zero
170.73C : +TEST+INFO : Invalid condition: (2) If a week of manufacture is provided, it must be in the range 1-54
170.73C : +TEST+INFO : Skip condition: (3) If the EDID is fake
170.73C : +VAR+INFO 2 : Week of manufacture present = 12
170.73C : +VAR+PASS 2 : Week of manufacture is less than or equal to 54
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : TEST: EDID 1.x Year of manufacture information: Required
170.73C : +TEST+INFO : Valid condition: (1) Must be greater than three and less than or equal to the current year minus 1990
170.73C : +TEST+INFO : Invalid condition: (1) A value less than three, which would mean the monitor came out before the EDID spec
170.73C : +TEST+INFO : Invalid condition: (2) A value greater than the current date as reported by this system
170.73C : +TEST+INFO : Skip condition: (3) The EDID is fake
170.73C : +TEST+INFO : Current year to compare against: 2003. EDID Representation: 13
170.73C : +TEST+INFO : Translated year of monitor manufacture: 2003. EDID Representation: 13
170.73C : +TEST+PASS : Year of manufacture is plausible
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : TEST: EDID 1.0 Serial Number: Optional if present
170.73C : +TEST+INFO : Valid condition: If a serial number is present (not 0), then it must be 32-bits, lowest bit is bit 1, highest is bit 32
170.73C : +TEST+INFO : Skip condition: If the EDID is fake
170.73C : +VAR+PASS 3 : Serial Number: 01010101
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : TEST: Verify 1.x compliant EDID revision
170.73C : +TEST+INFO : Valid condition: version = 1.x & an EDID1x header is present
170.73C : +TEST+INFO : Invalid condition: version != 1.x w/ an EDID1x header
170.73C : +TEST+INFO : EDID Version is 1.3
170.73C : +TEST+PASS : EDID 1.x revision is valid
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : TEST: EDID 1.x Video Input Definiton: Required
170.73C : +TEST+INFO : Valid condition: Bit 7 can only be set if the revision of the EDID is greater than or equal to 1.2
170.73C : +TEST+INFO : Invalid condition: Bit 7 set and using EDID 1.0 or 1.1
170.73C : +TEST+INFO : Skip condition: If the EDID is fake
170.73C : +TEST+INFO : Raw value: 26B468: Decoded info:
170.73C : +TEST+INFO : -Analog input
170.73C : +TEST+INFO : -Signal Level Standard: 0.700, 0.000 (0.700 V p-p)
170.73C : +TEST+INFO : -Display does not expect a blank-to-black setup or pedestal per Signal Level Standard
170.73C : +TEST+INFO : -Separate syncs Supported
170.73C : +TEST+INFO : -Composite sync (on Hsync line) not supported
170.73C : +TEST+INFO : -Sync on green video is not supported
170.73C : +TEST+INFO : -Serration of the Vsync pulse is not required when composite sync. or sync-on-green video is used
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : TEST: EDID1.x Max Image Size Test: Required
170.73C : +TEST+INFO : Valid condition: If the type of monitor is not a projector, the image size should not be zero
170.73C : +TEST+INFO : Valid condition: If the type of monitor is a projector, the image size should be zero
170.73C : +TEST+INFO : Invalid condition: The type of monitor is a projector and the image size is not zero
170.73C : +TEST+INFO : Invalid condition: The type of monitor is not a projector and the image size is zero
170.73C : +TEST+INFO : Skip condition: Auto mode is enabled
170.73C : +TEST+INFO : Skip condition: The EDID is fake
170.73C : +TEST+INFO : *****Skipping test as auto mode is enabled
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : TEST: EDID 1.x Gamma Transfer Characteristic: Required
170.73C : +TEST+INFO : Valid condition: The Gamma coefficient should be in the range of 1.00 to 3.55 after decode
170.73C : +TEST+INFO : Invalid condition: The Gamma coefficient is outside of the range of 1.00 to 3.55
170.73C : +TEST+INFO : Skip condition: The Gamma coefficient contains the value of 0xFF - not defined here
170.73C : +TEST+INFO : Skip condition: The EDID is fake
170.73C : +TEST+INFO : Formula to use: gamma = (value_stored + 100.0)/100.0
170.73C : +TEST+INFO : Substituted values: 2.200000 = (120 + 100.0) / 100.0
170.73C : +TEST+PASS : Gamma Transfer Characteristic is within range
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : TEST: EDID 1.x Common Phosphor and Chromaticity: Required
170.73C : +TEST+INFO : Valid condition: No chromaticity values and white points should be 0.0 (0.0 ~= 0.0 - 0.0001)
170.73C : +TEST+INFO : Invalid condition: A chromaticity value or white point that is approximately zero
170.73C : +TEST+INFO : Skip condition: The EDID is fake
170.73C : +TEST+INFO : Red X = 0.631
170.73C : +TEST+INFO : Red Y = 0.329
170.73C : +TEST+INFO : Green X = 0.276
170.73C : +TEST+INFO : Green Y = 0.600
170.73C : +TEST+INFO : Blue X = 0.143
170.73C : +TEST+INFO : Blue Y = 0.057
170.73C : +TEST+INFO : White X = 0.283
170.73C : +TEST+INFO : White Y = 0.297
170.73C : +TEST+PASS : Value for Red X is not zero
170.73C : +TEST+PASS : Value for Red Y is not zero
170.73C : +TEST+PASS : Value for Green X is not zero
170.73C : +TEST+PASS : Value for Green Y is not zero
170.73C : +TEST+PASS : Value for Blue X is not zero
170.73C : +TEST+PASS : Value for Blue Y is not zero
170.73C : +TEST+PASS : Value for White X is not zero
170.73C : +TEST+PASS : Value for White Y is not zero
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : TEST: EDID1.x VESA Established timings: Required
170.73C : +TEST+INFO : Valid condition: The current mode is in the established, detailed or standard timings sections
170.73C : +TEST+INFO : Invalid condition: The current mode is not in the established, detailed or standard timings sections
170.73C : +TEST+INFO : Raw info: Established Timings 43A4 ManufacturerReserved 0 1152x870@75: 0
170.73C : +TEST+INFO : Established Timing Mode [640, 480] @ 75(NI), source = VESA
170.73C : +TEST+INFO : Established Timing Mode [640, 480] @ 60(NI), source = IBM, VGA
170.73C : +TEST+INFO : Established Timing Mode [720, 400] @ 70(NI), source = IBM, VGA
170.73C : +TEST+INFO : Established Timing Mode [1280, 1024] @ 75(NI), source = VESA
170.73C : +TEST+INFO : Established Timing Mode [1024, 768] @ 75(NI), source = VESA
170.73C : +TEST+INFO : Established Timing Mode [800, 600] @ 75(NI), source = VESA
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : TEST: EDID 1.x Standard Timings: Required
170.73C : +TEST+INFO : Valid condition: (1) Unused fields (timings) set to 0101h
170.73C : +TEST+INFO : Valid condition: (2) Used files use a unique 2-byte code
170.73C : +TEST+INFO : Valid condition: (3) The mode must be displayable on the monitor w/o causing a sync break
170.73C : +TEST+INFO : Valid condition: (4) The current mode must be in the established, standard, or detailed timings lists
170.73C : +TEST+INFO : Valid condition: (5) The horizontal pixels active field is non-zero
170.73C : +TEST+INFO : Valid condition: (6) The mode is not a duplicate of any other mode in the extended, detailed, or standard timings lists
170.73C : +TEST+INFO : Invalid condition: (1) Unused fields (timings) are not set to 0101h
170.73C : +TEST+INFO : Invalid condition: (2) The monitor looses sync with the adapter
170.73C : +TEST+INFO : Invalid condition: (3) Used fields do not use a unique code
170.73C : +TEST+INFO : Invalid condition: (a) The same standard timing code is found in more than one place in the structure
170.73C : +TEST+INFO : Invalid condition: (4) The current mode is not in the established, standard, or detailed timings lists
170.73C : +TEST+INFO : Invalid condition: (5) The horizontal pixels active field does not have a 0 in it [ 8(0 + 31) = 248 < 256]
170.73C : +TEST+INFO : Invalid condition: (6) Duplicate modes will be failed during a check at the end of the detailed timings
170.73C : +TEST+INFO : Skip condition: (7) The EDID is fake
170.73C : +TEST+INFO : Verifying standard timing ID #0
170.73C : +TEST+PASS : Added standard timing mode [640, 480 @ 85(NI)]
170.73C : +TEST+INFO : Aspect ratio is 4:3
170.73C : +TEST+INFO : Verifying standard timing ID #1
170.73C : +TEST+PASS : Added standard timing mode [800, 600 @ 85(NI)]
170.73C : +TEST+INFO : Aspect ratio is 4:3
170.73C : +TEST+INFO : Verifying standard timing ID #2
170.73C : +TEST+PASS : Added standard timing mode [1024, 768 @ 85(NI)]
170.73C : +TEST+INFO : Aspect ratio is 4:3
170.73C : +TEST+INFO : Verifying standard timing ID #3
170.73C : +TEST+PASS : Added standard timing mode [1280, 960 @ 85(NI)]
170.73C : +TEST+INFO : Aspect ratio is 4:3
170.73C : +TEST+INFO : Verifying standard timing ID #4
170.73C : +TEST+PASS : Added standard timing mode [1280, 1024 @ 85(NI)]
170.73C : +TEST+INFO : Aspect ratio is 5:4
170.73C : +TEST+INFO : Verifying standard timing ID #5
170.73C : +TEST+PASS : Added standard timing mode [1600, 1200 @ 75(NI)]
170.73C : +TEST+INFO : Aspect ratio is 4:3
170.73C : +TEST+INFO : Verifying standard timing ID #6
170.73C : +TEST+PASS : Field is unused
170.73C : +TEST+INFO : Verifying standard timing ID #7
170.73C : +TEST+PASS : Field is unused
170.73C : +TEST+PASS : All standard timings appear to be unique if present
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : Detailed Monitor Description
170.73C : +TEST+INFO : Detailed timing #0: 1024x768 @84Hz
170.73C : +TEST+PASS : Values are valid
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : Monitor Descriptor Block Summary
170.73C : +TEST+INFO : Monitor Serial Number
170.73C : +TEST+INFO : 31200002PK0
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : Monitor Descriptor Block Summary
170.73C : +TEST+INFO : Monitor Range Limits
170.73C : +TEST+INFO : Vertical rate 50 - 160 Hz
170.73C : +TEST+INFO : Horizontal in 30 - 98 KHz
170.73C : +TEST+INFO : Max Supported Pixel Clock in MHz 200
170.73C : +TEST+INFO : No secondary timing supported
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : Monitor Descriptor Block Summary
170.73C : +TEST+INFO : Monitor Name
170.73C : +TEST+INFO : Acer AF715
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : TEST: EDID 1.x 128-byte checksum: Required
170.73C : +TEST+INFO : Valid condition: The sum of all bytes in the 128-byte EDID must equal 0
170.73C : +TEST+INFO : Invalid condition: The sum of all bytes in the 128-byte EDID does not equal 0
170.73C : +TEST+INFO : Formula used for checksum validation will be: BYTE bCheckSum = sum(b0...b127)
170.73C : +TEST+INFO : Raw info: This edids checksum value = 0X31
170.73C : +TEST+PASS : Checksum in EDID matches calculated checksum
170.73C : +TEST+INFO :
170.73C : +TEST+INFO : Skipping device NetMeeting driver (\\.\DISPLAYV1) as non-physical
170.73C : +TEST+INFO : Skipping device RDPDD Chained DD (\\.\DISPLAYV2) as non-physical
170.73C : +TEST+INFO : Display device instance 3 is too big, so finished
170.73C : NTLOG REPORT -------------------------------------------------------
170.73C : Tests Total 27 | Variations Total 4
170.73C : ------------------------------------------------------------------
170.73C : Tests Passed 27 100% | Variations Passed 4 100%
170.73C : Tests Warned 0 0% | Variations Warned 0 0%
170.73C : Tests Failed sev3 0 0% | Variations Failed sev3 0 0%
170.73C : Tests Failed sev2 0 0% | Variations Failed sev2 0 0%
170.73C : Tests Failed sev1 0 0% | Variations Failed sev1 0 0%
170.73C : Tests Blocked 0 0% | Variations Blocked 0 0%
170.73C : Tests Aborted 0 0% | Variations Aborted 0 0%
170.73C : --------------------------------------------------------------------
****
Proc ID Proc.Name Wrkng.Set PagedPool NonPgdPl Pagefile Commit Handles Threads UserObj GdiObj
0 Idle Process-> 20 0 0 0 0 0 1 N/A N/A
4 System-> 44 0 0 0 28 222 49 0 0
328 SMSS.EXE-> 36 5 0 164 164 21 3 0 0
488 CSRSS.EXE-> 1448 35 4 1472 1472 340 11 N/A N/A
524 WINLOGON.EXE-> 1780 53 43 5728 5728 506 19 12 40
568 SERVICES.EXE-> 1816 29 9 8544 8544 355 18 0 4
580 LSASS.EXE-> 1172 35 7 3116 3116 295 21 0 4
748 SVCHOST.EXE-> 1092 21 6 1092 1092 236 10 0 4
800 SVCHOST.EXE-> 10580 100 29 11312 11312 1033 68 3 4
900 SVCHOST.EXE-> 436 13 2 564 564 48 5 N/A N/A
976 SVCHOST.EXE-> 596 28 6 1116 1116 135 15 N/A N/A
1228 EXPLORER.EXE-> 5784 49 8 7040 7040 285 10 75 197
1256 SPOOLSV.EXE-> 1024 23 3 2552 2552 124 11 0 4
1448 mgabg.exe-> 32 12 1 344 344 24 1 0 4
1912 PDesk.exe-> 1560 62 13 1736 1736 75 18 5 24
1928 MSMSGS.EXE-> 2084 46 9 8860 8860 258 11 19 76
1408 wpabaln.exe-> 328 29 2 560 560 47 1 4 14
1640 MSIEXEC.EXE-> 5404 39 5 3356 3356 259 7 0 8
1584 testmgr.exe-> 23600 47 13 17116 17116 231 10 42 54
1856 wuauclt.exe-> 2892 31 2 1264 1264 93 6 9 18
368 edidv2.exe-> 1808 16 1 464 464 44 1 0 8
**** NTLOG TERMINATED +DATE+03/26/2003 +TIME+11:50:40
/**** Time/Date/Name WrapUp ****/
HCT Version: 11.1.021213 Release
HCT Shell Date: Nov 12 2002 17:56:55
Test Kit: 16
Test Device: DISPLAY\ACRAC05\5&18AD131B&0&4D545800&01&00
Test Wrap-up Date: 3-26-2003
Test Wrap-up Time: 11:50:42
Test Name at Wrap-Up: EDID 1.3 & DDC
/**** Time/Date/Name WrapUp ****/
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.