**** NTLOG INITIATED +DATE+03/24/2003 +TIME+18:04:16 **** NtLog date: Tue Nov 12 19:13:09 2002 **** Exe date: Tue Nov 12 19:18:41 2002 **** Processor : Intel CPU, Pentium III (Coppermine core) (Celeron), stepping 3, 128K on-chip cache detected **** CPUS : 1 **** System : Windows NT 5.1[2600], Retail, Mouse, Service Pack 1 **** Build Lab : 2600.xpsp1.020828-1920 **** Vid Driver: NV4_DISP **** Chip Type: GeForce3 Ti 200 **** DAC Type : Integrated RAMDAC **** Adapter : GeForce3 Ti 200 **** MiniPort : Unknown **** VRAM : 131072 **** Hertz : 85 **** X Res : 800 **** Y Res : 600 **** BPP : 32 **** Planes : 1 **** RGB Masks: (888)(bgr) **** X Pos : 0 **** Y Pos : 0 **** Machine : SYSTEM-2 **** User Name : System2 **** Language : English **** KM boundary: 2 **** ProductOptions: None Proc ID Proc.Name Wrkng.Set PagedPool NonPgdPl Pagefile Commit Handles Threads UserObj GdiObj 0 Idle Process-> 20 0 0 0 0 0 1 N/A N/A 4 System-> 48 0 0 0 28 207 47 0 0 324 SMSS.EXE-> 32 5 0 164 164 21 3 0 0 476 CSRSS.EXE-> 1496 35 4 1556 1556 325 12 N/A N/A 500 WINLOGON.EXE-> 1812 53 42 5748 5748 506 19 12 40 544 SERVICES.EXE-> 1812 29 9 8516 8516 356 18 0 4 556 LSASS.EXE-> 1160 35 7 3100 3100 293 20 0 4 720 SVCHOST.EXE-> 1188 21 6 1068 1068 236 9 0 4 772 SVCHOST.EXE-> 10228 100 28 11288 11288 1005 68 3 4 860 SVCHOST.EXE-> 220 12 1 496 496 44 4 N/A N/A 900 SVCHOST.EXE-> 584 28 6 1096 1096 133 14 N/A N/A 1208 EXPLORER.EXE-> 6372 48 7 6772 6772 258 10 73 197 1236 SPOOLSV.EXE-> 564 23 3 2468 2468 111 10 0 4 1428 nvsvc32.exe-> 1032 19 2 436 436 68 3 1 8 1736 MSMSGS.EXE-> 2052 46 10 8860 8860 257 11 19 77 980 wpabaln.exe-> 528 29 2 560 560 47 1 4 14 1056 msiexec.exe-> 5004 39 5 3324 3324 259 7 0 8 360 testmgr.exe-> 23556 47 13 17024 17024 230 10 42 54 1120 wuauclt.exe-> 2896 31 2 1264 1264 93 6 9 18 1704 edidv2.exe-> 1516 16 1 384 384 26 1 0 8 **** **** 6A8.0CC : +TEST+PASS : Fetched EDID data from the registry: DevNode 00000800 = Acer AC511 6A8.0CC : +TEST+INFO : First 256 bytes of the EDID 6A8.0CC : +TEST+INFO : 0: 00 ff ff ff ff ff ff 00 04 72 02 ac 01 01 01 01 6A8.0CC : +TEST+INFO : 16: 0c 0d 01 03 68 1c 15 a0 2a 06 99 a0 57 4f 98 26 6A8.0CC : +TEST+INFO : 32: 10 48 4c a0 08 00 31 59 45 59 01 01 01 01 01 01 6A8.0CC : +TEST+INFO : 48: 01 01 01 01 01 01 f9 15 20 f8 30 58 1f 20 20 40 6A8.0CC : +TEST+INFO : 64: 13 00 18 d2 10 00 00 1e 00 00 00 ff 00 33 31 32 6A8.0CC : +TEST+INFO : 80: 30 30 30 30 33 50 4b 30 30 0a 00 00 00 fd 00 32 6A8.0CC : +TEST+INFO : 96: 78 1e 36 07 00 0a 20 20 20 20 20 20 00 00 00 fc 6A8.0CC : +TEST+INFO : 112: 00 41 63 65 72 20 41 43 35 31 31 0a 20 20 00 6e 6A8.0CC : +TEST+INFO : 128: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6A8.0CC : +TEST+INFO : 144: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6A8.0CC : +TEST+INFO : 160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6A8.0CC : +TEST+INFO : 176: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6A8.0CC : +TEST+INFO : 192: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6A8.0CC : +TEST+INFO : 208: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6A8.0CC : +TEST+INFO : 224: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6A8.0CC : +TEST+INFO : 240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : TEST: Verify EDID buffer is at least 128 bytes in length: Required 6A8.0CC : +TEST+INFO : Success condition: Required: EDID is >= 128 bytes 6A8.0CC : +TEST+INFO : Failure condition: EDID is < 128 bytes 6A8.0CC : +TEST+PASS : EDID is 256 bytes in length 6A8.0CC : +VAR+INFO 0 : 6A8.0CC : +VAR+INFO 0 : TEST: Verify that a version 1 EDID is at least revison 3: Required 6A8.0CC : +VAR+INFO 0 : Valid condition: The EDID is at least verison 1.3 6A8.0CC : +VAR+INFO 0 : Invalid condition: The EDID is less than version 1.3 6A8.0CC : +VAR+PASS 0 : EDID 1.3 detected 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : TEST: EDID Header Verification: Reguired 6A8.0CC : +TEST+INFO : Valid Condition: EDID header matches the the byte string 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00 6A8.0CC : +TEST+INFO : Invalid condition: EDID header does not match the byte string exactly 6A8.0CC : +TEST+INFO : Actual EDID Header (may be byte swaped): FFFFFF0000FFFFFF 6A8.0CC : +TEST+PASS : EDID header is valid 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : TEST: EDID 1.x Vendor/Product Information: Required 6A8.0CC : +TEST+INFO : Valid condition: (1) All ID fields are properly populated. This means there are no zeros and no compressed values > 26 except for 31 ("_") 6A8.0CC : +TEST+INFO : Valid condition: a) Bit 7 of byte 0 must be 0 6A8.0CC : +TEST+INFO : Valid condition: (2) Week of manufacture and year of manufacture are less than or equal to the current date 6A8.0CC : +TEST+INFO : Monitor PnP ID: ACR 6A8.0CC : +TEST+PASS : Manufacturer ID field appears to be populated 6A8.0CC : +TEST+PASS : Byte 1 bit 7 of manufacturer ID is not set 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : TEST: EDID 1.x Product Information: Optional if present 6A8.0CC : +TEST+INFO : Valid condition: If product code is present it contains numbers in hex, LSB first 6A8.0CC : +VAR+PASS 1 : Product code: AC02 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : TEST: EDID 1.x Week of manufacture information: Optional if present 6A8.0CC : +TEST+INFO : Valid condition: (1) If a week of manufacture is not provided, it must be zero 6A8.0CC : +TEST+INFO : Invalid condition: (2) If a week of manufacture is provided, it must be in the range 1-54 6A8.0CC : +TEST+INFO : Skip condition: (3) If the EDID is fake 6A8.0CC : +VAR+INFO 2 : Week of manufacture present = 12 6A8.0CC : +VAR+PASS 2 : Week of manufacture is less than or equal to 54 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : TEST: EDID 1.x Year of manufacture information: Required 6A8.0CC : +TEST+INFO : Valid condition: (1) Must be greater than three and less than or equal to the current year minus 1990 6A8.0CC : +TEST+INFO : Invalid condition: (1) A value less than three, which would mean the monitor came out before the EDID spec 6A8.0CC : +TEST+INFO : Invalid condition: (2) A value greater than the current date as reported by this system 6A8.0CC : +TEST+INFO : Skip condition: (3) The EDID is fake 6A8.0CC : +TEST+INFO : Current year to compare against: 2003. EDID Representation: 13 6A8.0CC : +TEST+INFO : Translated year of monitor manufacture: 2003. EDID Representation: 13 6A8.0CC : +TEST+PASS : Year of manufacture is plausible 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : TEST: EDID 1.0 Serial Number: Optional if present 6A8.0CC : +TEST+INFO : Valid condition: If a serial number is present (not 0), then it must be 32-bits, lowest bit is bit 1, highest is bit 32 6A8.0CC : +TEST+INFO : Skip condition: If the EDID is fake 6A8.0CC : +VAR+PASS 3 : Serial Number: 01010101 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : TEST: Verify 1.x compliant EDID revision 6A8.0CC : +TEST+INFO : Valid condition: version = 1.x & an EDID1x header is present 6A8.0CC : +TEST+INFO : Invalid condition: version != 1.x w/ an EDID1x header 6A8.0CC : +TEST+INFO : EDID Version is 1.3 6A8.0CC : +TEST+PASS : EDID 1.x revision is valid 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : TEST: EDID 1.x Video Input Definiton: Required 6A8.0CC : +TEST+INFO : Valid condition: Bit 7 can only be set if the revision of the EDID is greater than or equal to 1.2 6A8.0CC : +TEST+INFO : Invalid condition: Bit 7 set and using EDID 1.0 or 1.1 6A8.0CC : +TEST+INFO : Skip condition: If the EDID is fake 6A8.0CC : +TEST+INFO : Raw value: 26AC68: Decoded info: 6A8.0CC : +TEST+INFO : -Analog input 6A8.0CC : +TEST+INFO : -Signal Level Standard: 0.700, 0.000 (0.700 V p-p) 6A8.0CC : +TEST+INFO : -Display does not expect a blank-to-black setup or pedestal per Signal Level Standard 6A8.0CC : +TEST+INFO : -Separate syncs Supported 6A8.0CC : +TEST+INFO : -Composite sync (on Hsync line) not supported 6A8.0CC : +TEST+INFO : -Sync on green video is not supported 6A8.0CC : +TEST+INFO : -Serration of the Vsync pulse is not required when composite sync. or sync-on-green video is used 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : TEST: EDID1.x Max Image Size Test: Required 6A8.0CC : +TEST+INFO : Valid condition: If the type of monitor is not a projector, the image size should not be zero 6A8.0CC : +TEST+INFO : Valid condition: If the type of monitor is a projector, the image size should be zero 6A8.0CC : +TEST+INFO : Invalid condition: The type of monitor is a projector and the image size is not zero 6A8.0CC : +TEST+INFO : Invalid condition: The type of monitor is not a projector and the image size is zero 6A8.0CC : +TEST+INFO : Skip condition: Auto mode is enabled 6A8.0CC : +TEST+INFO : Skip condition: The EDID is fake 6A8.0CC : +TEST+INFO : *****Skipping test as auto mode is enabled 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : TEST: EDID 1.x Gamma Transfer Characteristic: Required 6A8.0CC : +TEST+INFO : Valid condition: The Gamma coefficient should be in the range of 1.00 to 3.55 after decode 6A8.0CC : +TEST+INFO : Invalid condition: The Gamma coefficient is outside of the range of 1.00 to 3.55 6A8.0CC : +TEST+INFO : Skip condition: The Gamma coefficient contains the value of 0xFF - not defined here 6A8.0CC : +TEST+INFO : Skip condition: The EDID is fake 6A8.0CC : +TEST+INFO : Formula to use: gamma = (value_stored + 100.0)/100.0 6A8.0CC : +TEST+INFO : Substituted values: 2.600000 = (160 + 100.0) / 100.0 6A8.0CC : +TEST+PASS : Gamma Transfer Characteristic is within range 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : TEST: EDID 1.x Common Phosphor and Chromaticity: Required 6A8.0CC : +TEST+INFO : Valid condition: No chromaticity values and white points should be 0.0 (0.0 ~= 0.0 - 0.0001) 6A8.0CC : +TEST+INFO : Invalid condition: A chromaticity value or white point that is approximately zero 6A8.0CC : +TEST+INFO : Skip condition: The EDID is fake 6A8.0CC : +TEST+INFO : Red X = 0.625 6A8.0CC : +TEST+INFO : Red Y = 0.340 6A8.0CC : +TEST+INFO : Green X = 0.310 6A8.0CC : +TEST+INFO : Green Y = 0.596 6A8.0CC : +TEST+INFO : Blue X = 0.150 6A8.0CC : +TEST+INFO : Blue Y = 0.063 6A8.0CC : +TEST+INFO : White X = 0.283 6A8.0CC : +TEST+INFO : White Y = 0.298 6A8.0CC : +TEST+PASS : Value for Red X is not zero 6A8.0CC : +TEST+PASS : Value for Red Y is not zero 6A8.0CC : +TEST+PASS : Value for Green X is not zero 6A8.0CC : +TEST+PASS : Value for Green Y is not zero 6A8.0CC : +TEST+PASS : Value for Blue X is not zero 6A8.0CC : +TEST+PASS : Value for Blue Y is not zero 6A8.0CC : +TEST+PASS : Value for White X is not zero 6A8.0CC : +TEST+PASS : Value for White Y is not zero 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : TEST: EDID1.x VESA Established timings: Required 6A8.0CC : +TEST+INFO : Valid condition: The current mode is in the established, detailed or standard timings sections 6A8.0CC : +TEST+INFO : Invalid condition: The current mode is not in the established, detailed or standard timings sections 6A8.0CC : +TEST+INFO : Raw info: Established Timings 8A0 ManufacturerReserved 0 1152x870@75: 0 6A8.0CC : +TEST+INFO : Established Timing Mode [640, 480] @ 60(NI), source = IBM, VGA 6A8.0CC : +TEST+INFO : Established Timing Mode [720, 400] @ 70(NI), source = IBM, VGA 6A8.0CC : +TEST+INFO : Established Timing Mode [1024, 768] @ 60(NI), source = VESA 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : TEST: EDID 1.x Standard Timings: Required 6A8.0CC : +TEST+INFO : Valid condition: (1) Unused fields (timings) set to 0101h 6A8.0CC : +TEST+INFO : Valid condition: (2) Used files use a unique 2-byte code 6A8.0CC : +TEST+INFO : Valid condition: (3) The mode must be displayable on the monitor w/o causing a sync break 6A8.0CC : +TEST+INFO : Valid condition: (4) The current mode must be in the established, standard, or detailed timings lists 6A8.0CC : +TEST+INFO : Valid condition: (5) The horizontal pixels active field is non-zero 6A8.0CC : +TEST+INFO : Valid condition: (6) The mode is not a duplicate of any other mode in the extended, detailed, or standard timings lists 6A8.0CC : +TEST+INFO : Invalid condition: (1) Unused fields (timings) are not set to 0101h 6A8.0CC : +TEST+INFO : Invalid condition: (2) The monitor looses sync with the adapter 6A8.0CC : +TEST+INFO : Invalid condition: (3) Used fields do not use a unique code 6A8.0CC : +TEST+INFO : Invalid condition: (a) The same standard timing code is found in more than one place in the structure 6A8.0CC : +TEST+INFO : Invalid condition: (4) The current mode is not in the established, standard, or detailed timings lists 6A8.0CC : +TEST+INFO : Invalid condition: (5) The horizontal pixels active field does not have a 0 in it [ 8(0 + 31) = 248 < 256] 6A8.0CC : +TEST+INFO : Invalid condition: (6) Duplicate modes will be failed during a check at the end of the detailed timings 6A8.0CC : +TEST+INFO : Skip condition: (7) The EDID is fake 6A8.0CC : +TEST+INFO : Verifying standard timing ID #0 6A8.0CC : +TEST+PASS : Added standard timing mode [640, 480 @ 85(NI)] 6A8.0CC : +TEST+INFO : Aspect ratio is 4:3 6A8.0CC : +TEST+INFO : Verifying standard timing ID #1 6A8.0CC : +TEST+PASS : Added standard timing mode [800, 600 @ 85(NI)] 6A8.0CC : +TEST+INFO : Aspect ratio is 4:3 6A8.0CC : +TEST+INFO : Verifying standard timing ID #2 6A8.0CC : +TEST+PASS : Field is unused 6A8.0CC : +TEST+INFO : Verifying standard timing ID #3 6A8.0CC : +TEST+PASS : Field is unused 6A8.0CC : +TEST+INFO : Verifying standard timing ID #4 6A8.0CC : +TEST+PASS : Field is unused 6A8.0CC : +TEST+INFO : Verifying standard timing ID #5 6A8.0CC : +TEST+PASS : Field is unused 6A8.0CC : +TEST+INFO : Verifying standard timing ID #6 6A8.0CC : +TEST+PASS : Field is unused 6A8.0CC : +TEST+INFO : Verifying standard timing ID #7 6A8.0CC : +TEST+PASS : Field is unused 6A8.0CC : +TEST+PASS : All standard timings appear to be unique if present 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : Detailed Monitor Description 6A8.0CC : +TEST+INFO : Detailed timing #0: 800x600 @85Hz 6A8.0CC : +TEST+PASS : Values are valid 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : Monitor Descriptor Block Summary 6A8.0CC : +TEST+INFO : Monitor Serial Number 6A8.0CC : +TEST+INFO : 31200003PK0 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : Monitor Descriptor Block Summary 6A8.0CC : +TEST+INFO : Monitor Range Limits 6A8.0CC : +TEST+INFO : Vertical rate 50 - 120 Hz 6A8.0CC : +TEST+INFO : Horizontal in 30 - 54 KHz 6A8.0CC : +TEST+INFO : Max Supported Pixel Clock in MHz 70 6A8.0CC : +TEST+INFO : No secondary timing supported 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : Monitor Descriptor Block Summary 6A8.0CC : +TEST+INFO : Monitor Name 6A8.0CC : +TEST+INFO : Acer AC511 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : TEST: EDID 1.x 128-byte checksum: Required 6A8.0CC : +TEST+INFO : Valid condition: The sum of all bytes in the 128-byte EDID must equal 0 6A8.0CC : +TEST+INFO : Invalid condition: The sum of all bytes in the 128-byte EDID does not equal 0 6A8.0CC : +TEST+INFO : Formula used for checksum validation will be: BYTE bCheckSum = sum(b0...b127) 6A8.0CC : +TEST+INFO : Raw info: This edids checksum value = 0X6E 6A8.0CC : +TEST+PASS : Checksum in EDID matches calculated checksum 6A8.0CC : +TEST+INFO : 6A8.0CC : +TEST+INFO : Skipping device NetMeeting driver (\\.\DISPLAYV1) as non-physical 6A8.0CC : +TEST+INFO : Skipping device RDPDD Chained DD (\\.\DISPLAYV2) as non-physical 6A8.0CC : +TEST+INFO : Display device instance 3 is too big, so finished 6A8.0CC : NTLOG REPORT ------------------------------------------------------- 6A8.0CC : Tests Total 27 | Variations Total 4 6A8.0CC : ------------------------------------------------------------------ 6A8.0CC : Tests Passed 27 100% | Variations Passed 4 100% 6A8.0CC : Tests Warned 0 0% | Variations Warned 0 0% 6A8.0CC : Tests Failed sev3 0 0% | Variations Failed sev3 0 0% 6A8.0CC : Tests Failed sev2 0 0% | Variations Failed sev2 0 0% 6A8.0CC : Tests Failed sev1 0 0% | Variations Failed sev1 0 0% 6A8.0CC : Tests Blocked 0 0% | Variations Blocked 0 0% 6A8.0CC : Tests Aborted 0 0% | Variations Aborted 0 0% 6A8.0CC : -------------------------------------------------------------------- **** Proc ID Proc.Name Wrkng.Set PagedPool NonPgdPl Pagefile Commit Handles Threads UserObj GdiObj 0 Idle Process-> 20 0 0 0 0 0 1 N/A N/A 4 System-> 48 0 0 0 28 207 47 0 0 324 SMSS.EXE-> 32 5 0 164 164 21 3 0 0 476 CSRSS.EXE-> 1496 35 4 1556 1556 325 12 N/A N/A 500 WINLOGON.EXE-> 1812 53 42 5748 5748 506 19 12 40 544 SERVICES.EXE-> 1812 29 9 8516 8516 357 18 0 4 556 LSASS.EXE-> 1160 35 7 3100 3100 293 20 0 4 720 SVCHOST.EXE-> 1188 21 6 1068 1068 236 9 0 4 772 SVCHOST.EXE-> 10228 100 28 11288 11288 1005 68 3 4 860 SVCHOST.EXE-> 220 12 1 496 496 44 4 N/A N/A 900 SVCHOST.EXE-> 584 28 6 1096 1096 133 14 N/A N/A 1208 EXPLORER.EXE-> 6372 48 7 6772 6772 258 10 73 197 1236 SPOOLSV.EXE-> 564 23 3 2468 2468 111 10 0 4 1428 nvsvc32.exe-> 1032 19 2 436 436 68 3 1 8 1736 MSMSGS.EXE-> 2052 46 10 8860 8860 257 11 19 77 980 wpabaln.exe-> 528 29 2 560 560 47 1 4 14 1056 msiexec.exe-> 5004 39 5 3324 3324 259 7 0 8 360 testmgr.exe-> 23556 47 13 17024 17024 230 10 42 54 1120 wuauclt.exe-> 2896 31 2 1264 1264 93 6 9 18 1704 edidv2.exe-> 1808 16 1 464 464 44 1 0 8 **** NTLOG TERMINATED +DATE+03/24/2003 +TIME+18:04:17 /**** Time/Date/Name WrapUp ****/ HCT Version: 11.1.021213 Release HCT Shell Date: Nov 12 2002 17:56:55 Test Kit: 16 Test Device: DISPLAY\ACRAC02\4&15CC1A05&0&22446688&01&00 Test Wrap-up Date: 3-24-2003 Test Wrap-up Time: 18:4:18 Test Name at Wrap-Up: EDID 1.3 & DDC /**** Time/Date/Name WrapUp ****/Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.