**** NTLOG INITIATED +DATE+03/24/2003 +TIME+14:38:22 **** NtLog date: Tue Nov 12 19:13:09 2002 **** Exe date: Tue Nov 12 19:18:41 2002 **** Processor : Intel CPU, Pentium II (Mendocino core) (Celeron), stepping 5, 128K on-chip cache detected **** CPUS : 1 **** System : Windows NT 5.1[2600], Retail, Mouse, Service Pack 1 **** Build Lab : 2600.xpsp1.020828-1920 **** Vid Driver: G550DHD **** Chip Type: Matrox G550 **** DAC Type : Integrated, 360 MHz **** Adapter : Matrox Millennium G550 AGP **** MiniPort : G550DH **** VRAM : 32768 **** Hertz : 85 **** X Res : 800 **** Y Res : 600 **** BPP : 32 **** Planes : 1 **** RGB Masks: (888)(bgr) **** X Pos : 0 **** Y Pos : 0 **** Machine : SYSTEM-1 **** User Name : System1 **** Language : English **** KM boundary: 2 **** ProductOptions: None Proc ID Proc.Name Wrkng.Set PagedPool NonPgdPl Pagefile Commit Handles Threads UserObj GdiObj 0 Idle Process-> 20 0 0 0 0 0 1 N/A N/A 4 System-> 40 0 0 0 28 127 49 0 0 332 SMSS.EXE-> 32 5 0 164 164 21 3 0 0 496 CSRSS.EXE-> 1636 36 4 1472 1472 319 11 N/A N/A 528 WINLOGON.EXE-> 1580 53 44 5724 5724 507 19 12 40 572 SERVICES.EXE-> 1688 29 9 8532 8532 354 18 0 4 584 LSASS.EXE-> 1084 35 7 3068 3068 292 19 0 4 736 SVCHOST.EXE-> 1300 21 6 1072 1072 226 8 0 4 760 SVCHOST.EXE-> 8656 100 26 10888 10888 970 62 6 11 844 SVCHOST.EXE-> 472 12 1 520 520 46 5 N/A N/A 856 SVCHOST.EXE-> 212 28 5 1092 1092 130 14 N/A N/A 1160 SPOOLSV.EXE-> 1080 23 3 2588 2588 125 11 0 4 1200 EXPLORER.EXE-> 6828 50 8 7992 7992 283 10 86 232 1328 mgabg.exe-> 32 12 1 344 344 24 1 0 4 1752 PDesk.exe-> 1540 62 13 1736 1736 75 18 5 24 1760 MSMSGS.EXE-> 1508 42 7 6800 6800 231 9 17 68 168 wpabaln.exe-> 232 29 2 560 560 47 1 4 14 480 msiexec.exe-> 5300 39 5 3436 3436 264 7 0 8 1652 testmgr.exe-> 23752 47 13 17252 17252 232 10 42 54 476 edidv2.exe-> 1516 16 1 384 384 26 1 0 8 **** **** 1DC.510 : +TEST+PASS : Fetched EDID data from the registry: DevNode 00000CD0 = Acer AC511 1DC.510 : +TEST+INFO : First 256 bytes of the EDID 1DC.510 : +TEST+INFO : 0: 00 ff ff ff ff ff ff 00 04 72 02 ac 01 01 01 01 1DC.510 : +TEST+INFO : 16: 0c 0d 01 03 68 1c 15 a0 2a 06 99 a0 57 4f 98 26 1DC.510 : +TEST+INFO : 32: 10 48 4c a0 08 00 31 59 45 59 01 01 01 01 01 01 1DC.510 : +TEST+INFO : 48: 01 01 01 01 01 01 f9 15 20 f8 30 58 1f 20 20 40 1DC.510 : +TEST+INFO : 64: 13 00 18 d2 10 00 00 1e 00 00 00 ff 00 33 31 32 1DC.510 : +TEST+INFO : 80: 30 30 30 30 33 50 4b 30 30 0a 00 00 00 fd 00 32 1DC.510 : +TEST+INFO : 96: 78 1e 36 07 00 0a 20 20 20 20 20 20 00 00 00 fc 1DC.510 : +TEST+INFO : 112: 00 41 63 65 72 20 41 43 35 31 31 0a 20 20 00 6e 1DC.510 : +TEST+INFO : 128: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1DC.510 : +TEST+INFO : 144: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1DC.510 : +TEST+INFO : 160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1DC.510 : +TEST+INFO : 176: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1DC.510 : +TEST+INFO : 192: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1DC.510 : +TEST+INFO : 208: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1DC.510 : +TEST+INFO : 224: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1DC.510 : +TEST+INFO : 240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : TEST: Verify EDID buffer is at least 128 bytes in length: Required 1DC.510 : +TEST+INFO : Success condition: Required: EDID is >= 128 bytes 1DC.510 : +TEST+INFO : Failure condition: EDID is < 128 bytes 1DC.510 : +TEST+PASS : EDID is 256 bytes in length 1DC.510 : +VAR+INFO 0 : 1DC.510 : +VAR+INFO 0 : TEST: Verify that a version 1 EDID is at least revison 3: Required 1DC.510 : +VAR+INFO 0 : Valid condition: The EDID is at least verison 1.3 1DC.510 : +VAR+INFO 0 : Invalid condition: The EDID is less than version 1.3 1DC.510 : +VAR+PASS 0 : EDID 1.3 detected 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : TEST: EDID Header Verification: Reguired 1DC.510 : +TEST+INFO : Valid Condition: EDID header matches the the byte string 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00 1DC.510 : +TEST+INFO : Invalid condition: EDID header does not match the byte string exactly 1DC.510 : +TEST+INFO : Actual EDID Header (may be byte swaped): FFFFFF0000FFFFFF 1DC.510 : +TEST+PASS : EDID header is valid 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : TEST: EDID 1.x Vendor/Product Information: Required 1DC.510 : +TEST+INFO : Valid condition: (1) All ID fields are properly populated. This means there are no zeros and no compressed values > 26 except for 31 ("_") 1DC.510 : +TEST+INFO : Valid condition: a) Bit 7 of byte 0 must be 0 1DC.510 : +TEST+INFO : Valid condition: (2) Week of manufacture and year of manufacture are less than or equal to the current date 1DC.510 : +TEST+INFO : Monitor PnP ID: ACR 1DC.510 : +TEST+PASS : Manufacturer ID field appears to be populated 1DC.510 : +TEST+PASS : Byte 1 bit 7 of manufacturer ID is not set 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : TEST: EDID 1.x Product Information: Optional if present 1DC.510 : +TEST+INFO : Valid condition: If product code is present it contains numbers in hex, LSB first 1DC.510 : +VAR+PASS 1 : Product code: AC02 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : TEST: EDID 1.x Week of manufacture information: Optional if present 1DC.510 : +TEST+INFO : Valid condition: (1) If a week of manufacture is not provided, it must be zero 1DC.510 : +TEST+INFO : Invalid condition: (2) If a week of manufacture is provided, it must be in the range 1-54 1DC.510 : +TEST+INFO : Skip condition: (3) If the EDID is fake 1DC.510 : +VAR+INFO 2 : Week of manufacture present = 12 1DC.510 : +VAR+PASS 2 : Week of manufacture is less than or equal to 54 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : TEST: EDID 1.x Year of manufacture information: Required 1DC.510 : +TEST+INFO : Valid condition: (1) Must be greater than three and less than or equal to the current year minus 1990 1DC.510 : +TEST+INFO : Invalid condition: (1) A value less than three, which would mean the monitor came out before the EDID spec 1DC.510 : +TEST+INFO : Invalid condition: (2) A value greater than the current date as reported by this system 1DC.510 : +TEST+INFO : Skip condition: (3) The EDID is fake 1DC.510 : +TEST+INFO : Current year to compare against: 2003. EDID Representation: 13 1DC.510 : +TEST+INFO : Translated year of monitor manufacture: 2003. EDID Representation: 13 1DC.510 : +TEST+PASS : Year of manufacture is plausible 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : TEST: EDID 1.0 Serial Number: Optional if present 1DC.510 : +TEST+INFO : Valid condition: If a serial number is present (not 0), then it must be 32-bits, lowest bit is bit 1, highest is bit 32 1DC.510 : +TEST+INFO : Skip condition: If the EDID is fake 1DC.510 : +VAR+PASS 3 : Serial Number: 01010101 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : TEST: Verify 1.x compliant EDID revision 1DC.510 : +TEST+INFO : Valid condition: version = 1.x & an EDID1x header is present 1DC.510 : +TEST+INFO : Invalid condition: version != 1.x w/ an EDID1x header 1DC.510 : +TEST+INFO : EDID Version is 1.3 1DC.510 : +TEST+PASS : EDID 1.x revision is valid 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : TEST: EDID 1.x Video Input Definiton: Required 1DC.510 : +TEST+INFO : Valid condition: Bit 7 can only be set if the revision of the EDID is greater than or equal to 1.2 1DC.510 : +TEST+INFO : Invalid condition: Bit 7 set and using EDID 1.0 or 1.1 1DC.510 : +TEST+INFO : Skip condition: If the EDID is fake 1DC.510 : +TEST+INFO : Raw value: 268068: Decoded info: 1DC.510 : +TEST+INFO : -Analog input 1DC.510 : +TEST+INFO : -Signal Level Standard: 0.700, 0.000 (0.700 V p-p) 1DC.510 : +TEST+INFO : -Display does not expect a blank-to-black setup or pedestal per Signal Level Standard 1DC.510 : +TEST+INFO : -Separate syncs Supported 1DC.510 : +TEST+INFO : -Composite sync (on Hsync line) not supported 1DC.510 : +TEST+INFO : -Sync on green video is not supported 1DC.510 : +TEST+INFO : -Serration of the Vsync pulse is not required when composite sync. or sync-on-green video is used 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : TEST: EDID1.x Max Image Size Test: Required 1DC.510 : +TEST+INFO : Valid condition: If the type of monitor is not a projector, the image size should not be zero 1DC.510 : +TEST+INFO : Valid condition: If the type of monitor is a projector, the image size should be zero 1DC.510 : +TEST+INFO : Invalid condition: The type of monitor is a projector and the image size is not zero 1DC.510 : +TEST+INFO : Invalid condition: The type of monitor is not a projector and the image size is zero 1DC.510 : +TEST+INFO : Skip condition: Auto mode is enabled 1DC.510 : +TEST+INFO : Skip condition: The EDID is fake 1DC.510 : +TEST+INFO : *****Skipping test as auto mode is enabled 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : TEST: EDID 1.x Gamma Transfer Characteristic: Required 1DC.510 : +TEST+INFO : Valid condition: The Gamma coefficient should be in the range of 1.00 to 3.55 after decode 1DC.510 : +TEST+INFO : Invalid condition: The Gamma coefficient is outside of the range of 1.00 to 3.55 1DC.510 : +TEST+INFO : Skip condition: The Gamma coefficient contains the value of 0xFF - not defined here 1DC.510 : +TEST+INFO : Skip condition: The EDID is fake 1DC.510 : +TEST+INFO : Formula to use: gamma = (value_stored + 100.0)/100.0 1DC.510 : +TEST+INFO : Substituted values: 2.600000 = (160 + 100.0) / 100.0 1DC.510 : +TEST+PASS : Gamma Transfer Characteristic is within range 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : TEST: EDID 1.x Common Phosphor and Chromaticity: Required 1DC.510 : +TEST+INFO : Valid condition: No chromaticity values and white points should be 0.0 (0.0 ~= 0.0 - 0.0001) 1DC.510 : +TEST+INFO : Invalid condition: A chromaticity value or white point that is approximately zero 1DC.510 : +TEST+INFO : Skip condition: The EDID is fake 1DC.510 : +TEST+INFO : Red X = 0.625 1DC.510 : +TEST+INFO : Red Y = 0.340 1DC.510 : +TEST+INFO : Green X = 0.310 1DC.510 : +TEST+INFO : Green Y = 0.596 1DC.510 : +TEST+INFO : Blue X = 0.150 1DC.510 : +TEST+INFO : Blue Y = 0.063 1DC.510 : +TEST+INFO : White X = 0.283 1DC.510 : +TEST+INFO : White Y = 0.298 1DC.510 : +TEST+PASS : Value for Red X is not zero 1DC.510 : +TEST+PASS : Value for Red Y is not zero 1DC.510 : +TEST+PASS : Value for Green X is not zero 1DC.510 : +TEST+PASS : Value for Green Y is not zero 1DC.510 : +TEST+PASS : Value for Blue X is not zero 1DC.510 : +TEST+PASS : Value for Blue Y is not zero 1DC.510 : +TEST+PASS : Value for White X is not zero 1DC.510 : +TEST+PASS : Value for White Y is not zero 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : TEST: EDID1.x VESA Established timings: Required 1DC.510 : +TEST+INFO : Valid condition: The current mode is in the established, detailed or standard timings sections 1DC.510 : +TEST+INFO : Invalid condition: The current mode is not in the established, detailed or standard timings sections 1DC.510 : +TEST+INFO : Raw info: Established Timings 8A0 ManufacturerReserved 0 1152x870@75: 0 1DC.510 : +TEST+INFO : Established Timing Mode [640, 480] @ 60(NI), source = IBM, VGA 1DC.510 : +TEST+INFO : Established Timing Mode [720, 400] @ 70(NI), source = IBM, VGA 1DC.510 : +TEST+INFO : Established Timing Mode [1024, 768] @ 60(NI), source = VESA 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : TEST: EDID 1.x Standard Timings: Required 1DC.510 : +TEST+INFO : Valid condition: (1) Unused fields (timings) set to 0101h 1DC.510 : +TEST+INFO : Valid condition: (2) Used files use a unique 2-byte code 1DC.510 : +TEST+INFO : Valid condition: (3) The mode must be displayable on the monitor w/o causing a sync break 1DC.510 : +TEST+INFO : Valid condition: (4) The current mode must be in the established, standard, or detailed timings lists 1DC.510 : +TEST+INFO : Valid condition: (5) The horizontal pixels active field is non-zero 1DC.510 : +TEST+INFO : Valid condition: (6) The mode is not a duplicate of any other mode in the extended, detailed, or standard timings lists 1DC.510 : +TEST+INFO : Invalid condition: (1) Unused fields (timings) are not set to 0101h 1DC.510 : +TEST+INFO : Invalid condition: (2) The monitor looses sync with the adapter 1DC.510 : +TEST+INFO : Invalid condition: (3) Used fields do not use a unique code 1DC.510 : +TEST+INFO : Invalid condition: (a) The same standard timing code is found in more than one place in the structure 1DC.510 : +TEST+INFO : Invalid condition: (4) The current mode is not in the established, standard, or detailed timings lists 1DC.510 : +TEST+INFO : Invalid condition: (5) The horizontal pixels active field does not have a 0 in it [ 8(0 + 31) = 248 < 256] 1DC.510 : +TEST+INFO : Invalid condition: (6) Duplicate modes will be failed during a check at the end of the detailed timings 1DC.510 : +TEST+INFO : Skip condition: (7) The EDID is fake 1DC.510 : +TEST+INFO : Verifying standard timing ID #0 1DC.510 : +TEST+PASS : Added standard timing mode [640, 480 @ 85(NI)] 1DC.510 : +TEST+INFO : Aspect ratio is 4:3 1DC.510 : +TEST+INFO : Verifying standard timing ID #1 1DC.510 : +TEST+PASS : Added standard timing mode [800, 600 @ 85(NI)] 1DC.510 : +TEST+INFO : Aspect ratio is 4:3 1DC.510 : +TEST+INFO : Verifying standard timing ID #2 1DC.510 : +TEST+PASS : Field is unused 1DC.510 : +TEST+INFO : Verifying standard timing ID #3 1DC.510 : +TEST+PASS : Field is unused 1DC.510 : +TEST+INFO : Verifying standard timing ID #4 1DC.510 : +TEST+PASS : Field is unused 1DC.510 : +TEST+INFO : Verifying standard timing ID #5 1DC.510 : +TEST+PASS : Field is unused 1DC.510 : +TEST+INFO : Verifying standard timing ID #6 1DC.510 : +TEST+PASS : Field is unused 1DC.510 : +TEST+INFO : Verifying standard timing ID #7 1DC.510 : +TEST+PASS : Field is unused 1DC.510 : +TEST+PASS : All standard timings appear to be unique if present 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : Detailed Monitor Description 1DC.510 : +TEST+INFO : Detailed timing #0: 800x600 @85Hz 1DC.510 : +TEST+PASS : Values are valid 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : Monitor Descriptor Block Summary 1DC.510 : +TEST+INFO : Monitor Serial Number 1DC.510 : +TEST+INFO : 31200003PK0 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : Monitor Descriptor Block Summary 1DC.510 : +TEST+INFO : Monitor Range Limits 1DC.510 : +TEST+INFO : Vertical rate 50 - 120 Hz 1DC.510 : +TEST+INFO : Horizontal in 30 - 54 KHz 1DC.510 : +TEST+INFO : Max Supported Pixel Clock in MHz 70 1DC.510 : +TEST+INFO : No secondary timing supported 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : Monitor Descriptor Block Summary 1DC.510 : +TEST+INFO : Monitor Name 1DC.510 : +TEST+INFO : Acer AC511 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : TEST: EDID 1.x 128-byte checksum: Required 1DC.510 : +TEST+INFO : Valid condition: The sum of all bytes in the 128-byte EDID must equal 0 1DC.510 : +TEST+INFO : Invalid condition: The sum of all bytes in the 128-byte EDID does not equal 0 1DC.510 : +TEST+INFO : Formula used for checksum validation will be: BYTE bCheckSum = sum(b0...b127) 1DC.510 : +TEST+INFO : Raw info: This edids checksum value = 0X6E 1DC.510 : +TEST+PASS : Checksum in EDID matches calculated checksum 1DC.510 : +TEST+INFO : 1DC.510 : +TEST+INFO : Skipping device NetMeeting driver (\\.\DISPLAYV1) as non-physical 1DC.510 : +TEST+INFO : Skipping device RDPDD Chained DD (\\.\DISPLAYV2) as non-physical 1DC.510 : +TEST+INFO : Display device instance 3 is too big, so finished 1DC.510 : NTLOG REPORT ------------------------------------------------------- 1DC.510 : Tests Total 27 | Variations Total 4 1DC.510 : ------------------------------------------------------------------ 1DC.510 : Tests Passed 27 100% | Variations Passed 4 100% 1DC.510 : Tests Warned 0 0% | Variations Warned 0 0% 1DC.510 : Tests Failed sev3 0 0% | Variations Failed sev3 0 0% 1DC.510 : Tests Failed sev2 0 0% | Variations Failed sev2 0 0% 1DC.510 : Tests Failed sev1 0 0% | Variations Failed sev1 0 0% 1DC.510 : Tests Blocked 0 0% | Variations Blocked 0 0% 1DC.510 : Tests Aborted 0 0% | Variations Aborted 0 0% 1DC.510 : -------------------------------------------------------------------- **** Proc ID Proc.Name Wrkng.Set PagedPool NonPgdPl Pagefile Commit Handles Threads UserObj GdiObj 0 Idle Process-> 20 0 0 0 0 0 1 N/A N/A 4 System-> 40 0 0 0 28 127 49 0 0 332 SMSS.EXE-> 32 5 0 164 164 21 3 0 0 496 CSRSS.EXE-> 1636 36 4 1472 1472 319 11 N/A N/A 528 WINLOGON.EXE-> 1580 53 44 5724 5724 507 19 12 40 572 SERVICES.EXE-> 1688 29 9 8532 8532 355 18 0 4 584 LSASS.EXE-> 1084 35 7 3068 3068 292 19 0 4 736 SVCHOST.EXE-> 1300 21 6 1072 1072 226 8 0 4 760 SVCHOST.EXE-> 8656 100 26 10888 10888 970 62 6 11 844 SVCHOST.EXE-> 472 12 1 520 520 46 5 N/A N/A 856 SVCHOST.EXE-> 212 28 5 1092 1092 130 14 N/A N/A 1160 SPOOLSV.EXE-> 1080 23 3 2588 2588 125 11 0 4 1200 EXPLORER.EXE-> 6828 50 8 7992 7992 283 10 86 232 1328 mgabg.exe-> 32 12 1 344 344 24 1 0 4 1752 PDesk.exe-> 1540 62 13 1736 1736 75 18 5 24 1760 MSMSGS.EXE-> 1508 42 7 6800 6800 231 9 17 68 168 wpabaln.exe-> 232 29 2 560 560 47 1 4 14 480 msiexec.exe-> 5300 39 5 3436 3436 264 7 0 8 1652 testmgr.exe-> 23752 47 13 17252 17252 232 10 42 54 476 edidv2.exe-> 1796 16 1 452 452 44 1 0 8 **** NTLOG TERMINATED +DATE+03/24/2003 +TIME+14:38:23 /**** Time/Date/Name WrapUp ****/ HCT Version: 11.1.021213 Release HCT Shell Date: Nov 12 2002 17:56:55 Test Kit: 16 Test Device: DISPLAY\ACRAC02\5&18AD131B&0&4D545800&01&00 Test Wrap-up Date: 3-24-2003 Test Wrap-up Time: 14:38:25 Test Name at Wrap-Up: EDID 1.3 & DDC /**** Time/Date/Name WrapUp ****/Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.