\HELP\WINNT4\NT40.TXT
ZyXEL FN311 10/100 PCI Adapter
---------------------------------------------
Driver Installation for Microsoft Windows NT 4.0
------------------------------------------------
Getting Started
---------------
The following example illustrates the installation of the adapter
card.
Installation Procedure
----------------------
1. The Windows NT 4.0 CD-ROM or diskettes are needed for the following
procedure.
2. Insert the network adapter into your computer and power up your
Windows NT 4.0 system normally.
3. After the system boots up properly,In the Control Panel window,
double-click on the "Networks" icon.
4. Select the "Adapters" menu tab. Click on the "Add" button.
5. Click on "Have disk".
6. Insert the driver disk into the floppy drive. Enter the drive leter
where the Drivers and Diagnostics disk is inserted.
Enter "A:\" if the drive letter for the floppy drive is A, then Click
" OK".
7. Select the "ZyXEL FN311 10/100 PCI Adapter", then Click OK.
8. Windows NT will copy the driver files from the driver disk. It also
will pop up with the Configure Network Adapter window. You can change
the "Speed/Duplex mode" ,"Network Address" and "Early Tx threshold "
parameters, then Click "CLOSE".
Caution: Unless necessary, do not modify the "Network Address" field.
The driver will use the default unique Ethernet address contained in
the serial ROM on the adapter.
9. Then Windows NT will show Microsoft TCP/IP Properties Windows , you
can choice "Obtain an IP address from a DHCP server" or "Specify an IP
Address"
10. After completing the file copy process, Windows NT will prompt you for
reboot the PC. Click on YES to restart the system.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.