\HELP\WIN98\WIN98.TXT
ZyXEL FN311 10/100 PCI Adapter
---------------------------------------------
Driver Installation for Microsoft Windows 98
--------------------------------------------
Getting Started
---------------
Microsoft Windows Windows 98 do not come bundled with the driver
for the adapter. You must go through the following procedure
to install the device driver into the Windows 98 system for the
adapter to function properly.
The Windows 98 CD is needed to complete this installation.
The following installation example illustrates the installation of the
Adapter.
Windows 98/98-SE Installation Procedure
---------------------------------------
It is recommended that you complete the Windows 98 installation without
the adapter card in the system.
1. Shut down the computer and install the adapter into the slot.
2. Start your Windows 98 system normally.
Upon power up, it will prompt "PCI Ethernet Controller" in New Hardware
Found dialog box. The system will indicate to you that a new PCI
Ethernet Controller has been found.
3. Select "Search for the best driver for your device(Recommended)", then
click "Next" button.
4. Insert the "Driver Diskette in your floppy drive".
5. Select "Specify a location", and Location of driver:
"A:\WIN98\FN311.INF" ,then click "Next" button.
6. Windows driver file search for the device "ZyXEL FN311 10/100 PCI
Adapter", and Location of driver: "A:\WIN98\FN311.INF" ,then click
"Next" button.
The Windows 98 CD-ROM is required to be inserted for system files.
7. Add New Hardware Wizard Table show "ZyXEL FN311 10/100 PCI Adapter",
then click "Finish" button. Follow screen instructions to complete
the process.
8. Restart your computer.
Advanced Setup
--------------
The driver configures the adapter card to operate in autosensing
mode by default. In this mode, the card automatically selects the most
appropriate operating speed and duplex mode. There might be instances
when you need to configure the adapter card to operate at a particular
speed and duplex mode. The following procedure guides you into the
Windows 98 system for this setting.
1. In Control Panel, open "Network".
2. Click on the "ZyXEL FN311 10/100 PCI Adapter" selection.
Then, clickon the "Properties" button.
3. Click on the "Advanced" memu tab in the adapter card window.
4. Click on the "Link Speed/Duplex Mode" property selection.
5. The "NetworkMedia" windows will show the following possible selections:
Auto Mode
10Half Mode
10Full Mode
100Half Mode
100Full Mode
Choose the appropriate setting as needed.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.