\HELP\WIN2000\WIN2K.TXT
ZyXEL FN311 10/100 PCI Adapter
------------------------------------------
Driver Installation for Microsoft Windows 2000
----------------------------------------------
Getting Started
---------------
The Windows 2000 installation CD is needed to complete this
installation.
The following example illustrates the installation of the adapter
card.
It is recommended that you complete the Windows 2000 installation
prior to inserting the adapter card into the system.
Insllation procedure
---------------------
1. Turn off your computer and plug the adapter into an
available PCI slot in your computer.
2. Turn on the power of your computer to boot the system.
The Win2000 system will find the hardware "Ethernet Controller"
and start prompting you for the proper device driver.
Click on "Next" of the "Found new Hardware Wizard".
3. Select the "Search for a suitable driver for my device
(recommended)", and then clikc on the "Next".
4. Select the "Specify a location", and click on "Next".
5. Insert the Drivers diskette into the floppy drive.
Select the "Browse" to indicate the location to "A:\WIN2000",
and click on "O.K.".
6. Windows will then found a driver for this device, and show you
"To install the driver Windows found, click on Next.
a:\win2000\FN311.inf"
Then. click on "Next" for sure.
7. A Digital Signature Not Found window pops up indicating that a
Microsoft digital signature does not exist.
8. Click "Yes" to continue with the driver installation when
"Digital Signature Not Found" window appear.
Windows 2000 starts copying files into the system.
9. Click "Finish" to complete the installation.
Windows 2000 is ready to network afterwards. It is not necessary
to reboot the system to start networking. You can now remove the
Driver disk.
Additional Information
----------------------
To futher customize the system, you can click My Network Places at
the desktop. Examples of parameters that you can change are computer
and workgroup names, IP addresses, and additional network services.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.