README.TXT Driver File Contents (FN311_3.0_Windows9x_Windows98_Windows98SE_WindowsME_WindowsNT4.0... ard.zip)

\HELP\README.TXT

                       ZyXEL FN311 10/100 PCI Adapter
                  ---------------------------------------------

  Introduction
  ------------
  Thank you for purchasing the Fast Ethernet PCI adapter. 
  The adapter card has been developed by combining the latest 100BASE-TX
  Fast Ethernet technology and peripheral component interface (PCI)
  local bus technology.

  Additionally, this adapter supports Wake-on-LAN feature in Windows 98SE,
  ME, 2000, and XP allowing the system with a adapter card to be
  remotely configured.  This adapter card supports PCI rev 2.1
  systems which requires a 3-pin connector for system wake-up as well as
  PCI rev 2.2 system which can be awakened by the PME# signal on the PCI
  bus.There are two protocol boot rom supported. PXE and RPL protocol.
  For example,PXE for winnt4.0 , Windows 2000 and RPL for novell 
  4.1x & 5.0 RPL Server
  When the system boot ,press <shift> + <F10> to change 
  the mode of bootstrap.

  Getting Started
  ---------------
  A DOS installation/help program, DIAG.EXE, is provided for ease of setup 
  for normal users.  DIAG.EXE will provide information on driver installation
  for the appropriate network operating systems.  

  To run the installation/help program, simply run DIAG.EXE program in the 
  root directory of the driver disk.  (eg. A:\DIAG<Enter>)

  
  If the network operating system you are using is not covered by the
  installation program, refer to the individual documentation provided
  for root directory.

  Revisions History
  -----------------

    Diskette Revision 3.00, 20030526
    --------------------------------
    Initial release of the ZyXEL Communication Corporation ZyXEL FN311
    10/100 PCI Adapter

  Driver support Network Operation Systems and Diskette Pathes listing
  -------------------------------------------------------------------- 

      NetWork Operation System support
      --------------------------------
          |
          +---NDIS2
          |   +---LAN Server 4.0
          |   +---LANTASTIC 6.0
          |   +---Microsoft Network Client 3.0 for DOS
          |   +---MS LAN Manager
          |   +---SUN PC-NFS
          |   +---Windows for Workgroups 3.1
          |
          +---NETWARE
          |   +---Client 32  for DOS/WINDOWS 3.X/WINDOWS 95
          |   +---Client for DOS
          |   +---Server
          |        +--- 4.x
          |        +--- 5.0
          +---LINUX
          +---SCO-UNIX
          |        +--- 5.X
          +---Windows for Workgroup 3.11
          +---Windows 95 / 95OSR2 / 98 / 2000 / Me / XP
          +---Windows NT
                   +--- 3.5
                   +--- 3.51
                   +--- 4.0

      Driver diskettes Directory PATH listing
      ---------------------------------------
       A:\
         | FN311.INF     ; Installation information file for Windows NT4.0
         | FN311.SYS     ; NDIS4 driver for Windows NT 4.0
         | FN311.HLP     ; Help file for Windows NT4.0
         | README.TXT     ; This read me file.
         | DIAG.EXE       ; Hardware configuration and diagnostics ultility.
         |
         +---NDIS2                  ; NDIS2 driver directory
         |                          ; Driver installation guide for
         |                          ; LANTASTIC 6.0, MS-CLIENT 3.0, PCNFS,
         |                          ; Windows for Workgroups 3.1,
         |                          ; LAN Server 4.0 for DOS
         |
         +---NETWARE                ; NOVELL NetWare driver
         |   +---CLIENT32           ; Client 32 for Win95
         |   +---DOSODI             ; DOS Client ODI Driver
         |   +---NW4.X              ; Patch files for Netware Server 4.X
         |   +---NW5.X              ; Driver files for Netware Server 4.X/5.X
         |
         +---Linux                  ; Linux drivers for kernel 2.4.18 & 2.2.x
         |
         +---WIN95                  ; Windows 95 & 95 OSR2
         |   +---WIN95a             ; Windows 95A
         +---WINNT4                 ; Windows NT 4.0
         +---WIN98                  ; Windows 98 & 98SE
         +---WIN2000                ; Windows 2000
         +---WINME                  ; Windows Millennium Edition
         +---WINXP                  ; Windows Experience 


  Trademarks
  ----------
  Novell and NetWare are registered rademarks of Novell, Inc.
 
  NetWare Client, NetWare DOS Requested, Novell DOS,  Personal 
  NetWare,and ODI are trademarks of Novell, Inc.

  Microsoft, Microsoft Windows, Windows 95, Windows98, Windows NT,Windows 2000
  and Windows ME are registered trademarks of Microsoft Corporation.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.84