; Equinox DMP Modem inf file, version 4.13 4/5/00 ; Equinox Connect strings ; Put the code below after the other CONNECT_EC strings up ; End Equinox Connect Strings CONNECT_EC=\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <cr><lf>COMPRESSION: V.42BIS<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <cr><lf>COMPRESSION: MNP<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> ; End Equinox Connect Strings ;Put the following before the first [ reponse strings ; ;Equinox Reponse strings [Equinox V.90 K56 CSM] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C3 <compression_off>=%C0 <protocol_on>=\\N2 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF= MAXCARRIERBPS=53000 MAXCONNECTBPS=57600 DETECT_STRING=ATI4<cr> DETECT_RESPONSE=Equinox V.90 CSM COMMAND_INIT=AT&F E1 V1 &C1 %C3 &D2 \\N2 S25=0 S95=40 S0=1 &S1<cr> COMMAND_INIT=AT<hwflowcontrol><compression><cr> COMMAND_LISTEN=ATS0=1<cr> COMMAND_DIAL=<autodial><phonenumber><cr> [Equinox V.90 ISA (Aceex)] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C3 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=56000 MAXCONNECTBPS=115200 DETECT_STRING=ATI<cr> DETECT_RESPONSE=249 DETECT_STRING=ATI0<cr> DETECT_RESPONSE=56000<cr> DETECT_STRING=ATI2<cr> DETECT_RESPONSE=OK<cr> COMMAND_INIT=AT&F&C1&D2 V1 S0=0 <speaker><cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> [Equinox V.90 MultiModem] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C3 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=56000 MAXCONNECTBPS=115200 DETECT_STRING=ATI4<cr> DETECT_RESPONSE=Equinox V.90 MultiModem (ver 2.210)<cr> DETECT_STRING=ATI0<cr> DETECT_RESPONSE=56000<cr> DETECT_STRING=ATI2<cr> DETECT_RESPONSE=OK<cr> COMMAND_INIT=AT&F&C1&D2 V1 S0=0 <speaker><cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;----------------------------------------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.