This ZIP archive contains the ZyXEL firmware ZyNOS 2.21(G.01) | 11/18/1999
for the Americal model of the ZyXEL ISDN router Prestige P100IH+ (U) !
Also included is the default settings "P100IHPA.ROM". You will not need it
unless you must reset all the Prestige's parameters, including the password.
Please see "How To Upgrade Prestige" section in release notes for how to
upgrade your Prestige.
There exists one ZIP file:
----------------------------------------------------
p100ihpa.zip for "American (USA)" ISDN switch type
----------------------------------------------------
The contents of these ZIP files are:
------------------------------------
a) README.TXT - This file
b) P100IHPA.BIN - binary RAS firmware ZyNOS v2.21(G.01) | 11/18/1999
for American ("USA") ISDN switches
c) P100IHPA.ROM - Default settings for P100IH+, American U or S/T model
d) p100ih+(u)_ZyNOS_v2.21(G.01).RTF - Release Notes and Manual Supplement
Rich Text Format
e) p100ih+(u)_ZyNOS_v2.21(G.01).PDF - -"- Adobe Acrobat File
f) p100ih+(u)_ZyNOS_v2.21(G.01).DOC - -"- WinWord 95/6.0 format
g) EPAPC093.EXE - ZyXEL's "Embedded Protocol Analyzer" (EPA) interpreter
version 0.93 - for DOS
use Prestige's CI command sequences:
1.) isdn fw ana on
2.) .... dial to remote node
for example: dev dial 1
3.) ... if connected, disconnect from remote node
for example: dev chan drop all
4.) isdn fw ana off
5.) isdn fw ana dump
-> save the dumped HEX data to ASCII file
note: there must not be any Prestige's command
line in that ASCII text - pure HEX only !!
6.) start EPAPC tool and 'load file', input the name
of previous stored ASCII text file.
7.) the EPAPC tool will now interpret all the dumped
HEX data and will display the ISDN D-channel
Protocol. You may save this interpreted data
into another ASCII text file for further study.
h) ZPKTTOOL.EXE - ZyXEL's "PKT-TOOL", PPP and IP packet interpreter
version 0.14 - for DOS
use Prestige's CI command sequences:
1.) sys trcl cl
2.) sys trcl sw on
3.) sys trcp sw on
4.) ... connect to remote node
for example: dev dial 1
5.) ... disconnect from remote node
for example: dev chan drop all
6.) sys trcl disp
7.) save the dumped tracelog with PKT/PPP/IP data to
an ASCII text file.
8.) start ZPKT-tool and 'load file', input the name
of previous stored ASCII text file.
9.) the ZPKT-tool will now interpret all the dumped
HEX data and will display the PPP and IP Protocol.
You may save this interpreted data into another
ASCII text file for further study.
electronic greetings from Vienna, Austria
Manfred Recla
**********************************************************
ZyXEL European File Distribution - Coordination Center
eMail: support@europe.zyxel.com
FTP: ftp://ftp.europe.zyxel.com
WWW: http://www.europe.zyxel.com
NEWS: news://news.europe.zyxel.com
**********************************************************
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.