WOL.TXT Driver File Contents (Compex.zip)

Demo testing of Wake-On-LAN on RE100ATX/WOL adapter
--------------------------------------------------

1) Install RE100ATX/WOL card in a free PCI slot of motherboard.
   The PC (Station A) use must support power management.
2) The PC must be in the power off state. Standby power is supply to
   RE100ATX/WOL adapter through the PCI bus.
3) Install another RE100TX-PCI or RE100ATX/WOL card in another PC (Station B).
   Boot up MS-DOS and run the diagnost utility.
4) Select Power Management option and then Magic packet option.
   It will prompt to input the destination MAC address of the RE100ATX/WOL
   adapter. Enter the MAC address of the RE100ATX/WOL that is installed in
   Station A and press Enter key.
   Immediately Station A on receiving the Magic packet will be wake up and
   the PC will start to boot.
 5) Wake-On-LAN using Magic packet test is successfully executed.

                        --------------------------



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.88